Where do the Black and White Wires of the ETBC7 Brake Controller Install Get Run

Updated 10/29/2015 | Published 10/28/2015

Question:

When the dual cable is routed in front of the vehicule, we have to connect the black one to the positive battery terminal by using a breaker and what we have to do with the white one?

asked by: Sylvain

Expert Reply:

The black wire of the # ETBC7 does get run to the positive post of the battery through the circuit breaker and the white wire runs to the negative side of the battery. This is what supplies power and ground to the brake controller. I attached a diagram that shows how it all wires up as well as an install video.

expert reply by: Jameson C