How to Find Correct Replacement Axle For Bandit Galvanized Trailer
Published 10/08/2015 >
Question:
II have a small bandit trailer looking for axel and wheels old is ok please help
asked by: Bandit G
Expert Reply:
Unfortunately, I don't have a reference book or online source that would tell me what wheels, hubs and axle your trailer used.
We offer a small selection of off the shelf axles available, if you could reply with the GVWR of your trailer, as well as the hub face to hub face dimension and center to center distance between the spring seats, I'd be happy to check to see if any of the axles we offer would work.
Timbren offers an axle-less suspension system that might also work for you. However, in order to make the correct recommendation for you, I'd need to know the capacity of your current axle. If you don't know the axle capacity, by providing me with the following information, I can make a pretty accurate guess:
Wheel Bolt Pattern (see linked FAQ article)
Inner and Outer Wheel Bearing Reference Numbers
Product Page this Question was Asked From
Dexter Trailer Idler Axle w/ Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 72" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 2200 lbs
- 5 on 4-1/2 Inch
- 58 Inch Spring Center
- 72 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Shop: CE Smith Trailer Axle Beam with Studded Hubs - 5 on 4-1/2" - 54" Long - 1.8K
- Shop: CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs
- Q&A: Recommended 2,000 lbs Axle w/ Idle Hubs That Have a 5 on 4-1/2 Bolt
- Q&A: What Is The Smallest Available Spindle Nut For 2.5k Axle?
- Q&A: Does The Kenda Karrier KR35 ST175/80R13 Tire w/AM03 Wheel Come With A Center Cap?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Brake Assembly Recommendation for a Dexter 4,400 lb Axle with 10 inch Assemblies
- Q&A: How to Determine Spring-Center and Hub-Face Measurements when Building a Trailer
- Q&A: How to Determine Where to Drill the 4 inch Hole to Install B&W Gooseneck Hitch # BWGNRK1257
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Trailer Wiring Diagrams
- Article: How Long will the Axles Last on my Boat Trailer?




