Bearing Buddy grease Caps For Trailer With Hub Bore that Measures 2-1/2 Inches Diameter
Updated 09/01/2015 | Published 08/31/2015
Products Featured in This Question
Question:
My hub bore measures 2 1/2 inches what size would I use? My bra is a 23B
asked by: Nick
Expert Reply:
The Buddy Bearing Bra, part # 23B you mentioned you have can fit many of the Bearing Buddy grease caps. The best way to find a Bearing Buddy that will fit your hub is to use a digital caliper like part # PTW80157 and take an accurate measurement.
We have a couple Bearing Buddys that are close to the size you said your hub bore is. The first is part # BB2441SS. These fit a hub bore that measures 2.44 inches.
The next size up is part # BB2562SS. This will fit in a hub bore that measures 2.562 inches diameter.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1781 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.78 Inch
- 3000 lbs Axle
- Bearing Buddy
more information >
Continue Researching
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Q&A: How to Add Grease to Super Lube Trailer Hub with Rear Grease Zerk Fitting
- Q&A: Troubleshooting Weak Braking After Installing New Dexter Electric Brakes on Trailer
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Q&A: Difference Between Trailer Tire Sizes ST205/75R15 and ST225/75R15
- Q&A: Determining Which Diameter to Measure for Bearing Buddy
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Lighting Requirements
- Article: How to Replace or Install an RV Roof Vent
- Article: How to Replace an RV Roof Vent Cover
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Accurately Measure Trailer Leaf Springs