Will Redline Tandem-Axle Trailer Hanger Kit Work With 7-Leaf Slipper Springs
Updated 08/07/2015 | Published 08/06/2015
Question:
does this only work for 4 leaf springs? thats how i read it i have 7 leaf springs
asked by: Scott A
0
Expert Reply:
The reference to 4 leaf springs is the quantity of leaf springs the Tandem-Axle Trailer Hanger Kit, part # AP216-H238. Since it is for a tandem set up you would need to use 4 different leaf springs that are designed for axles up to 8,000 lbs capacity.
expert reply by:
Jeffrey L
0
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 13-1/8" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- Dexter
more information >
Continue Researching
- Q&A: How to Determine Hanger Spacing on a Tandem-Axle Trailer Hanger Kit for Slipper Springs
- Q&A: Hanger Kit and Slipper Spring Spacing for Tandem 7,000 lb Axles to Add 16 Inch Wheels
- Q&A: Disc Brake Kit Recommendation for 2022 Grand Design Reflection 337RLS
- Q&A: Hanger Kit Recommendation for use with 29-1/2 Slipper Springs with 7000-lbs Tandem Axles
- Q&A: Identifying Dexter Axle Over 10,000 lbs
- Q&A: What Would Cause Electric Trailer Brakes To Lock Up When Vehicle Is In Reverse?
- Q&A: Replacement Switch for Hopkins Breakaway Kit
- Article: Trailer Maintenance Schedule
- Article: Slipper Spring Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Measure a Trailer Axle
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Article: Best Bike Racks for Electric Bikes
- Article: How to Tell the Weight Rating of a Trailer Axle