Does 7-Way Molded Trailer Wire Connector Have a Reverse Light Function
Published 08/05/2015
Question:
When connected to a 2012 Toyota Tacoma with tow package, does part # H20046 have a position that will activate backup lights on trailer when vehicle is in reverse?
asked by: Lwal
1
Helpful Expert Reply:
Yes, the center pin on trailer side wiring harness # H20046 is for reverse lights on the trailer. For this particular harness it is the yellow wire. But it will only work if the center pin is functional on your 2012 Toyota Tacoma. If you have the factory installed 7-Way on the Tacoma then it should be active.
expert reply by:
Michael H
1
Continue Researching
- Q&A: Is the Dexter Dual Hydraulic Jack System Self Leveling?
- Q&A: Replacement Converter for WFCO WF-8955PEC for Lithium Batteries
- Q&A: Is There An All Lithium Version Of The Progressive Dynamics Replacement Converter Section PD4655V
- Q&A: Recommended Suspension Upgrade for a 2022 Ram 2500 w/ Factory Air Ride
- Article: It's Fun Until It Breaks: Synthetic or Steel Winch Rope
- Q&A: Replacing the Drop Leg Spring Loaded Pull Pin on a Bulldog 180 Series Square Jack
- Q&A: Wall Thickness of Demco Gooseneck Coupler Outer Tube part # DM63KV
- Q&A: How to Terminate Power to the Trailer Brakes When Towing
- Article: Trailer Wiring Diagrams
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Trailer Lighting Requirements
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)