Dexter Trailer Axle Measurements on 89 Inch Axle
Updated 07/28/2015 | Published 07/27/2015
Question:
Is the 89inch description below measured from tip to tip or from flange to flange? Would this item be okay to have on a double axle trailer with a Lippert axle behind it? This would be replacing a faulty Lippert axle. Thank you! Dexter Trailer Axle Beam with EZ-Lube Spindles - 89inch Long - 3,500 lbs Dexter Trailer Axles Code: T3584F-EZ-8974
asked by: Kevin S
Expert Reply:
The Dexter Trailer Axle # T3584F-EZ-8974 measures 89 inches from hub face to hub face. The flange-to-flange measurement is 82-5/8 inches.
As long as the Dexter axle has the same capacity as the Lippert axle and the same hub face and spring center measurements, it will not be a problem to have them both on the same trailer. Lippert and Dexter axles are very similar and even use the same bearing numbers.
I have attached a diagram showing where to measure for the hub face and spring seat measurements to find the correct axle for you.
Product Page this Question was Asked From
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration
- Q&A: Full Axle vs Spindle Replacement for 2012 Forest River Stealth Toy Hauler
- Q&A: How to Determine if 3,500 Hubs will Fit Axle Hub T3584F-EZ-8974
- Q&A: Is there a Replacement Dexter Axle that Fits in Place of a 3,500 Pound Lippert Axle
- Q&A: Difference Between Dexter 3,500 lb Trailer Axles, EZ Lube vs. non EZ Lube
- Search Results: l44649
- Video: Checking Out the Dexter Trailer Axle Beam with EZ-Lube Spindles
- Video: A Closer Look at the Dexter Trailer Axle Beam with EZ-Lube Spindles
- Video: The Low-Down on the Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles
- Shop: Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Q&A: Replacement Bearing Kit for a Lippert 3,500 lbs Axle
- Search Results: lippert axle
- Search Results: axle
- Shop: Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles - 95" Long - 7,000 lbs
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 5-1/2
- Q&A: 89 inch Long Trailer Axle that Fits Hubs for 3,500 lb Axle Capacity
- Q&A: How to Determine Correct Hub Replacement for 1994 Jayco Eagle SD with Dexter Axle