Curt Trailer Hitch Hits Small Lip on Fender on 2015 Lexus GX 460
Updated 06/30/2020 | Published 06/27/2015
Question:
I just got the curt hitch for the 2015 lexus gx 460. The hitch seem to hit a small lip on the rear fender. does that piece have to be removed?
asked by: Will
Expert Reply:
The installation instructions do not mention anything about it. Generally speaking if something is preventing proper installation of a trailer hitch, such as # C13043 for your 2015 Lexus GX 460, then the obstruction would either have to be removed or modified.
If you are talking about that cover that is directly above the receiver then you should be able to go ahead and torque the bolts down as specified in the instructions. It may cause that fascia piece to flex some but wouldn't hurt it. Otherwise you would need to trim around the obstruction.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 2 Inch Hitch
- No Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Recommended Trailer Hitch For A 2022 Lexus GX 460
- Q&A: 2022 Lexus GX 460 Highest Capacity Trailer Hitch Recommendation
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Which Trailer Hitch Receiver for a 2014 Lexus GX 460 is Least Visible
- Q&A: How Difficult Is It To Install The Draw-Tite Hitch On A 2022 Kia Seltos?
- Q&A: Will the Hollywood Racks Crosstrack Bike Rack for 1 Bike Work with Fenders?
- Q&A: Does the 2021 Lexus GX 460 Curt Hitch Come with a Spacer and Longer Bolts?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Article: Which Hitches are Made in the USA
- Article: Determining Trailer Tongue Weight
- Article: Rooftop Cargo Carriers
- Article: My Trailer Hitch Doesn't Fit
Chris M.
6/26/2020
I have the same problem, there needs to be a 1/4" spacer between frame and hitch receiver. it really feels too tight like i will break the bumper if i attach this. Would inserting a couple of washer between the frame and receiver be a safety issue?