How to Select Correct Bearing Buddy Bearing Protectors for 4 x 8 Trailer
Updated 06/18/2015 | Published 06/16/2015 >
Products Featured in This Question
Question:
I have purchased a Harbour freight trailer# 90154 4X8 . I would like to purchase Buddy Bearings for it. What bearing do I require as theirs does not work? Please email me the part number. Thank you.
asked by: Bob H
Expert Reply:
I reviewed the online owner's manual for your folding utility trailer and no information is provided on hubs supplied, so to select Bearing Buddy protectors for it you will need to remove the existing grease caps and measure the inside hub bore with a precision dial or digital caliper.
You will need to measure to the nearest thousandth - to 3 decimal places such as 1.810. Once you know this you can use the linked page to select the Bearing Buddy set closest in diameter. You will also need to determine if your hub bore is threaded or non-threaded. Filters on the linked page will let you narrow the product results shown to those that meet your needs. For example, if your hubs are not threaded and you measure a bore of 1.800-inches then you can use chrome-plated set # BB1810.
Use caution when filling your protectors with grease; it is possible to blow out your inner grease seal if excessive grease/pressure is forced through the Bearing Buddy.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 2047 - Chrome Plated - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 2.05 Inch
- 2000 lbs Axle
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Dust Cover/Cap Solution for Harbor Freight Trailer
- Q&A: Replacement Tail Lights for a 2008 Featherlite 4926 Car Hauler Trailer
- Q&A: Picking Out Bearing Buddy for Harbor Freight Trailer
- Q&A: Replacement Bearing Kit Needed for a 2006 Marine Master Model TR196-2S
- Q&A: Bearing Buddy Grease Caps for Hub Bore Dimension of 2.05-Inches
- Q&A: Are 800 lb and 1,500 lbs Replacement Fulton Trailer Jack Handles Interchangeable
- Q&A: What Direction Should the Caliper Mounting Bracket Face on Kodiak Disc Brake Assembly, # K1HR35D
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Bleed Your Trailer Surge Brakes
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: Brake Controller Installation: Starting from Scratch
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Article: How to Back Up a Trailer

