Trailer Hitch and Wiring for a 2015 Hyundai Sonata

Updated 06/16/2015 | Published 06/14/2015

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(128)

$224.94

Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1

(683)

$18.45

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(142)

$231.85

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs

(2334)

$47.93

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(28)

$50.58

Question:

bought this hitch for my 2011 sonata, will it fit a 2015 sonata that i just purchased hate to have to buy another hitch/

asked by: Bob

Expert Reply:

I checked with Curt and the 2015 Hyundai Sonata takes a different trailer hitch than the 2011 models. If you want to stick with the Curt brand the hitch for the 2015 model is # C11402.

If you are using the hitch for towing both vehicles/hitches do use the same ball mount, # C45521, as well as 1-7/8 inch ball # 19256 and 2 inch ball # 19258. For trailer wiring, if your 2015 is NOT a hybrid use # C56247. If it is a hybrid use # HM11143874.

If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch.

Curt also says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load (such as a bike rack or car go carrier) per their warranty requirements.