Anti-Sway Bars and Axle Stabilizers for a 2008 Pleasure-way Excell TS

Updated 04/29/2020 | Published 06/05/2015

Products Featured in This Question

Roadmaster Front Anti-Sway Bar - 1-3/8" Diameter

(2335)

$740.00

Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter

(2335)

$915.00

Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter

(2335)

$790.00

Question:

Can you tell me correct sway bar to get for my 2008 ford 5.4 pleasure way excell ts? can I put a sway bar and a Trac Bar on it? my pleasure way ha air bags. It sways going down road with any wind or when being passed by large vehicles to a point that threatens the ability to control vehicle even at speeds such as 55 mph. any help appreciated

asked by: Mark H

Expert Reply:

If your 2008 Pleasure-Way Excel is built on the Ford E-350 van chassis then for a rear anti-sway bar you can use # RM-1139-117. If it is built on the E-450 van chassis use # RM-1139-147. For the front you can use # RM-1139-115 which will fit E-250 through E-450 chassis.

I have included a link to our help article on heavy duty vehicle stability for you.

expert reply by: Michael H

Mike B.

4/27/2020

I am trying to decide between Hellwig and Roadmaster sway bars front and rear for our E450 class C motorhome. There is a substantial cost difference. Can you shed some light on this for me? Thanks in advance for your help.

Chris R.

4/29/2020

We've found one of the biggest differences between the two brands comes in the actual installation process. Roadmaster tends to put more emphasis on custom hardware, making the install easier and less time consuming. The physical quality of the brackets and hardware also tends to last longer. If you can tell me model year your E450 chassis is I would be happy to make a specific recommendation.