Bearing and Race Availability LM11949 and LM11910
Updated 05/27/2015 | Published 05/25/2015 >
Products Featured in This Question
Question:
Looking for a kit with 2 LM11949 bearings, 2 LM11910 races and 1 grease seal. Do you have a kit or do I need to buy individual pieces? Thanks
asked by: Rob H
Expert Reply:
We don't have a kit for the parts you need, but you can order them all individually.
You would want the part # LM11949, part # LM11910.
Since the bearing combination you referenced is uncommon you will need to measure to determine what seal you would need.
To pick out the correct replacement seal you will need to use digital dial calipers to measure the inner and outer diameter of the seal. Or you can remove the seal and the part number should be stamped in the rubber part of the seal.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - LM11949
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- .75 Inch I.D.
- Bearing LM11949
- Race LM11910
- 3000 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: Availability Of 5 on 4-1/2" Hubs For A 3/4" Spindle
- Q&A: Trailer Idler Hub That Has a 5 on 4-1/2 Lug Pattern and Uses LM67048 and LM11949 Bearings
- Q&A: Determining Correct Replacement Axle For Older Axle With Obsolete L44649 LM11949 Bearing Combination
- Article: Trailer Wiring Diagrams
- Q&A: Curt CrossWing or Sliding 5th Wheel Hitch for a 2021 Ram 2500
- Q&A: Replacement Light for RV Bargman 84 Series Trailer Light
- Q&A: Replacement Hub for a 3/4 Inch Diameter Straight Spindle
- Q&A: Availability of 72 inch Long Tandem Axle Trailer Fender in Diamond Plate
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: How to Tell the Weight Rating of a Trailer Axle

