Flat Towing Setup Recommendation for a 2008 Toyota 4Runner

Updated 05/12/2015 | Published 05/11/2015

Products Featured in This Question

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

(2196)

$575.00

Roadmaster Bulb and Socket Tail Light Wiring Kit for Towed Vehicles - Incandescent

(445)

$85.68

Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(422)

$850.00

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(673)

$74.09

Question:

what mounting brackets do i need to tow a 2005 V8 4runner ? Both vehicles are under 5000lbs.

asked by: Yani

Expert Reply:

For a base plate kit for your 2008 Toyota 4Runner I would recommend the Roadmaster XL base plate kit # 1185-1.

In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.

For lighting you can use the bulb and socket kit, # RM-155, and not have to worry about cutting and splicing into the vehicle wiring.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot II, # BRK2016, that applies the vehicle brakes in proportion to how much the two vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.