Troubleshooting Trailer Wiring on 2008 Snowbear 6x8 Utility Trailer  

- Just re-wired a 2008 Snowbear utility trailer 6x8 with a new harness, exactly as it was before with 14/16 gauge bonded wire. The Snowbear has a Flat Connector, 4 Pole, with 5 Wires. TRUCK-side has a regular 4-Pole Female Connector. This has worked perfectly before, just FYI. * New Wiring scheme: Left Side - Yellow + Brown. Right side - Green + Brown. White - grounded to frame. NOTE - I did not connectinch the 2 SIDE Yellow Lamps on the side of the trailer, as they are very corroded, so I did not replace, nor re-connect the wiring, from the Peterson Tail Lamps. BTW, I did remove their OLD wires from the lamps. * Trailer Connector 4 Pole + 5 Wires - could not find it locally, so i placed a new order with you. PROBLEM - After using the OLD Trailer Snowbear Connector 16 gauge, with the new wiring 14 gauge, here is what works, and what doesnt: 1. Truck/trailer Running Lights work fine. 2. Truck/trailer Stop Lights work fine. - - Truck/trailer Turn Signal Lights, do Not work properly, when connecting all 5 wires. A. Disconnecting the Right-Side Brown Wire to just a 4 Wire Trailer -to-Truck connection, does allow Turn Signals and Brake Lights to work, BUT, Not when I turn on the Running Lights. B. Turning on the Running Lights causes this Light Signal works fine, but the Right Signal is barely noticeable, Plus it makes some of the Trucks other Back Lights to signalinch too. The Plug-in Wiring schemes to the Peterson Tail lights are different for the Light and the Right. There are 4 Holes for the wire connections on the back of each tail light. Right Peterson - The Green and Brown are connected next to each other. Left Peterson - The Yellow is in hole #1 and Brown wire is in #4 Hole. * About the eTrailer Peterson light Video DEMO - does not demonstrate Where-to connect the wires into the back of the Left and Right Petersons. I WOULD LIKE TO SEE A PROPER DIAGRAM, IF POSSIBLE PLEASE. * About SNowbear - they stopped making the trailers in 2010, just snow plows now. I called them in Ontario but no longer have any support. Would you send me a Diagram or Schematic on how the Correct wiring for the this 4-pole/5wire trailer connector, or if there is another Work-around. I would really appreciate it as there are no Local trailer shops here on this Island. I apologize for the length of my email, but am trying to include as much info as possible that will hopefully create some Solutions for me. Mahalo Thank you

asked by: David M