Everything Works Except Trailer Running Lights After Wiring is Installed on a 2006 Nissan Armada
Published 12/17/2010 >
Products Featured in This Question
Question:
ok after a ton of research this is what I came up with, there should be a fourth relay for the tail light circuit somewhere on the vehicle. Do you know where it is and can I get a relay for this location.
asked by: Aaron T
Expert Reply:
I thought this one over for a while and could not come up with a definite solution. I asked our installer and he has not had the opportunity to install a harness on this vehicle yet. I then jumped on the internet and found a couple of interesting notes on the 2006 Armada. Apparently there is a relay socket under the dash just to the left of the steering column. Since your vehicle did not have the towing package installed at the factory this relay was not installed and will be needed to power the tail lights at the 7-Way and 4-way connector. The under dash connector will have 4 wires going into it. They will be Red/light blue, brown, black and red. This relay will be the same as the blue relays used under the hood. I would use one of these relays to test the connector under the dash and then purchase a new one for the under hood install. The relay you will need is included in the CURT relay kit, part # C57000.
The blue relays that are installed under the hood activate the left and right turn/brake signals and the brown under hood relay activates the 12 volt power for the trailer connector.
You may also have a tow package fuse missing in the fuse box under the hood. I would use the legend under the fuse box cover and check to see if there are any open slots that are listed for towing and tail lights. From the information I was able to obtain there is a 10 amp tail light fuse in location 36. If so you may need to install a fuse to get the tail lights to work on the towing package.
Let me know how this works for you, I will be glad to try to help further if your problem is not resolved.
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Hitch and Trailer Wiring Recommendation for 2025 Chevy Equinox Activ
- Q&A: Broken Screw in Hole for Trailer Connector Bracket on Blue Ox Base Plate Kit
- Q&A: Recommended Trailer Hitch for a 2020 Infiniti QX60
- Q&A: Where is the Brake Controller Adapter Port on a 2019 Nissan Titan
- Q&A: Recommended Wiring Harness and Relays for a 2025 Nissan Frontier
- Q&A: What is Towing Capacity of 1999 Jeep Cherokee Sport
- Q&A: Trailer Hitch and Wiring Harness Recommendation for 2019 Nissan Titan Without Tow Package
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller Installation: Starting from Scratch
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: 5 Things to Know About Weight Distribution Hitches

Aaron
12/17/2010
ok after a ton of research this is what I came up with, there should be a fourth relay for the tail light circuit somewhere on the vehicle. Do you know where it is and can I get a relay for this location.