What Are the Differences Among the Available Trailer Hitches for a 2010 Mazda CX-9  

Question:

Expert Reply:

The biggest difference among the available hitches for your 2010 Mazda CX-9 is that the Curt and Valley hitches (13575 and V82592), cannot be used with a weight distribution system.

The Draw-Tite (75531) can be used with a weight distribution system.

In terms of how much of the hitch is visible, I know it is a little difficult to see it in the videos. But I can tell you that with all of these hitches, you will be able to see the hitch opening and at least 6 inches of tubing on either side of the opening.

All of the hitches have a gross trailer weight capacity of 4,000 pounds, and a tongue weight capacity of 400 pounds. For the Draw-Tite, the gross trailer weight capacity remains at 4,000 pounds even with weight distribution. All of the hitches are Class III hitches.

If I had to choose one, I would recommend the Draw-Tite, # 75531, as it can be used with a WD system and has the highest customer rating of the available hitches. I have included a link to the instructions and an installation video for this hitch below. For accessories, I recommend Ball Mount, # C45010, and hitch ball # 63845 (2 inch) or 19260 (2-5/16). You will also need a pin and clip # C21500.

For wiring your CX-9 with a 4-pole connection, you will need Tow Ready Custom Fit Vehicle Wiring, # 118520. This type of harness plugs in line with your vehicles taillights and provides you with a 4-pole connection at the rear of the vehicle. I have included a link to the installation instructions below.

expert reply by: Michael H

0