How to Mount E-Track Cargo Control System To Inside of Enclosed Trailer

Updated 12/29/2014 | Published 12/28/2014

Question:

In your video you use 3/4 plywood to strengthen the installation of the vertical tracks. With this process can I place the plywood anywhere on the walls if my hauler or do I need to secure the plywood to one of the vertical structural beams? I am making a shelve which will be a work table.

asked by: Nigel

Expert Reply:

The Erickson E-Track Trailer Cargo Control tracks, # E19146, are intended to mount to the structural components of a trailer. These locations provide the most secure mounting to ensure your cargo remains stable within your trailer during transport. Without a secure mounting location you will not be able to use the full 6000 pound working load limit provided by the tracks. So you will definitely want to secure the plywood to one of the structural components.

The attached video may be helpful. It demonstrates installation of the E-Track system in an enclosed trailer.

Trailers may vary in the number and/or placement of structural components suitable for securing items like the E-Track. One thing to consider is while any one of the structural members in your trailer may be less sturdy than you might like, when the E-Tracks are mounted they typically will span several of these structural parts. If you can find at least two separate structural elements to mount each track you may find that the tracks tend to support and stabilize the sides of your trailer by connecting the structural elements.

expert reply by: Chris O