Hey Tyson! The Air Lift LoadLifter 5000 Ultimate Air Helper Springs item #AL88289 have a built in jounce bumper similar to a bump stop, whereas the item #AL57289 does not. These are helpful if you want to run your air bags with little or no air…
The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…
The factory puck system that was available for your 2017 Ram 2500 is integrated into the frame and cannot be installed as an aftermarket part. There are some underbed mounted fifth wheel hitch install kits but as of right now none of them install a…
Hello Shane, Great question, and I am going to need you pin box number to ensure we are getting you the right part number. If you are unsure of your pin box number, please feel free to send me the information off of the sticker on your current Pin…
Hey Lars. The Pace Edwards Switchblade Retractable Hard Tonneau Cover item #311-SWD7833 can only be full retracted. If you want a cover the can be partially retracted when you're using a 5th wheel hitch like item #BWRVK3600 you'll want the…
No, you are exactly correct. Lots of people don't check to see if their bumper is rated for the Curt RV Bumper Hitch item #C19101 to be attached to it. This definitely will not work with your 5th wheel trailer. You'll want to go with one of…
Hey Matt, You would need the Replacement Side Plates for Demco Autoslide 5th Wheel Trailer Hitch #DM99GV that you were already looking at to make the Demco Autoslide 5th Wheel Hitch #DM6077 compatible with your Ram's puck system. The Autoslide…
The closest standard trailer axle we currently have available to the 56-1/2 inch spring center length you are needing is one like the Dexter Trailer Idler Axle w/ Hubs #20545I-EZ-72-10 that has a 58 inch spring-center-to-spring-center measurement.…
Hey James, welcome back. That B&W item #BWRVK3670 is super reliable but you are not the only one who's had issues with how heavy it is. Love how you have already attempted our go to solution of taking off the lightest portion of the hitch. I…
Hey Michael, Most of our adapters to go from a 2-1/2" hitch to a 2" are going to be what you see out there or most likely have. Typically what I recommend is going with the reducer sleeve #e26YR. That is going to go down to the 2" that…
Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…
B&W re-designed the RVK3400 hitch with a little bit different styling and changed the part number to the RVK3405. Our part #BWRVK3400 is the RVK3405 but we just didn't change our part number.
