Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs

Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs

Item # K2MMT5X7

lowest price pledge

Our Price: $1,473.79


This item qualifies for Free Truck Freight Shipping

Shipping Weight: 450 lbs

Detail K2 2 Inch Ball Coupler Trailers - K2MMT5X7
zoom in icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
Please enter a valid email address.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

pop out icon replay 360 icon
horizontal rotate icon

Product Images

In Use/Installed

Customer Photos

  • Utility Trailer
  • Detail K2
  • 88L x 52W Inch
  • 1640 lbs
  • 2 Inch Ball Coupler
Utility trailer attaches to a 2" hitch ball and lets you haul almost any kind of cargo. 2-Position bed tilts for easy unloading. Tailgates fold out and side walls can be removed for larger loads. Weighs only 451 lbs, and holds up to 1,640 lbs. Lowest Prices for the best trailers from Detail K2. Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs part number K2MMT5X7 can be ordered online at or call 800-298-8924 for expert service.

  • All Info
  • Reviews (4)
  • Q & A (95)
  • Videos (4)
  • Photos
  • Why etrailer?

Detail K2 Trailers - K2MMT5X7

Utility trailer attaches to a 2" hitch ball and lets you haul almost any kind of cargo. 2-Position bed tilts for easy unloading. Tailgates fold out and side walls can be removed for larger loads. Weighs only 451 lbs, and holds up to 1,640 lbs.


  • A-frame utility trailer lets you transport ATVs, UTVs, equipment, and much more
  • 2-Position bed tilts down for easy loading and unloading
  • Load-bearing front tailgate and rear tailgate fold out to extend the bed length
  • Removable side panels allow you to load wide cargo
  • 12V Tail lights work in tandem with your vehicle's brake lights and turn signals
    • Trailer comes pre-wired - simply plug in lights to install
    • 4-Way flat trailer-end connector included
  • Marker lights on each side of the trailer make it more visible at night
  • Leaf spring supsension absorbs shock over bumps and rough terrain
  • 6 Tie-down locations make it easy to secure bulky loads
  • Square, cambered axle and fully welded frame add strength and durability
  • Powder coated steel trailer frame, floor, walls, and fenders are durable and UV resistant
  • Channel coupler with safety chains included
    • Trigger-style latch is easy to release
    • Zinc-plated steel resists corrosion
  • Simple assembly with included hardware
  • Certificate of Origin is included so the trailer can be titled at your local DMV


  • Gross vehicle weight rating (GVWR): 2,090 lbs
  • Payload capacity: 1,640 lbs
  • Overall length including trailer tongue (with rear gate extended): 177"
  • Bed dimensions: 88" long x 52" wide
    • Length with front and rear tailgates down: 136"
  • Height of front and rear tailgates: 24" tall
  • Height of removable side panels: 14" tall
  • Tongue length (from coupler to front gate): 44-7/8"
  • Ground clearance:
    • 10" To the axle
    • 20" To the trailer bed
  • Tailgate static weight capacity:
    • Front tailgate: 250 lbs
    • Rear tailgate: 100 lbs
  • Trailer weight: 451 lbs
  • 1-Year limited warranty

Coupler Specs:

  • Ball size: 2"
  • Coupler height: 16"
  • Diameter of pin lock hole: 8 mm

Tire and Wheel Specs:

  • Wheel diameter: 12"
  • Wheel bolt pattern: 5 on 4-1/2"
  • Tire size: 5.30-12
    • Load range: C

Trailer Bed Dimensions

Tailgate Dimensions

Note: Due to the size of this item it ships via truck freight and only to the contiguous United States.

With a 1,640-lb payload capacity, this Mighty Multi A-frame trailer can be used for hauling an ATV, UTV, equipment, yard waste, and much more. And its lightweight construction makes it easy for even small cars and trucks to tow.

Equipped for Extra-Long and Wide Loads

Fold-Out Tailgates

The length of the trailer bed can be extended by folding the front and rear tailgates down. First, release the tailgate from the side panels. To do this, unclip the 2 snapper pins that connect the tailgate to the latches on each side panel. Then lift the tailgate up out of the latches and simply fold the panel down. Lanyards keep the pins attached to the gate latches so that you won't lose them.

When both tailgates are unlatched, you can remove the side panels to create a flatbed trailer. To do this, unbolt each side panel from the trailer floor separately. There are 6 cargo tie-down locations on the trailer floor, which make it convenient to strap down large and bulky items.

2-Position Bed Adjustment

2-Position Trailer Bed

The trailer bed can either be level in its travel position, or tilted down for loading and unloading. This makes it safer and easier for you to load heavy items because you can slide them into the trailer rather than having to lift them.

D Pins

To tilt the trailer bed, simply unclip the snapper pins that connect the bed to the frame. Lanyards keep the pins attached to the trailer bed so that you won't lose them.

Tilting Trailer Up

Once both pins are released, the trailer bed can be tilted down into the loading/unloading position. Shifting heavy items toward the rear of the trailer will help to tilt the bed down so that you don't have to do as much heavy lifting. Once you're ready to reload, shift the weight of any heavy items toward the front of the trailer to help the bed level out again. When the trailer bed is back in its travel position, reinsert the pins to secure the trailer bed back onto the frame.

Trailer Lighting

Tail Lights

The trailer's tail lights work in tandem with the brake lights and turn signals of your vehicle, and they are compliant with DOT standards for street safety. Additional marker lights are located on each side of the trailer, and they will illuminate when your vehicle lights are turned on. This makes the trailer more visible at night.

Wiring Clips

The trailer light wiring is pre-installed and cleanly attached under the trailer bed. The wiring harnesses are conveniently located in each light bracket, making it quick and easy to plug in the tail lights and marker lights when you mount them.

License Plate Bracket

An additional bracket is included for your license plate. This will attach to the driver's-side tail light.

MMT5X7 Detail K2 Mighty Multi Utility A-Frame Trailer - 7-1/2' Long - 1,639 lb

K2MMT5X7 Installation InstructionsInstallation Details K2MMT5X7 Installation instructions

Video of Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Detail K2 Mighty Multi A-Frame Utility Trailer Manufacturer Review

Customer Reviews

Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs - K2MMT5X7

Average Customer Rating:  3.8 out of 5 stars   (4 Customer Reviews)

Utility trailer attaches to a 2" hitch ball and lets you haul almost any kind of cargo. 2-Position bed tilts for easy unloading. Tailgates fold out and side walls can be removed for larger loads. Weighs only 451 lbs, and holds up to 1,640 lbs.

- K2MMT5X7

I probably use the trailer about 2 to 3 times a month. I like everything about it. Small, compact, and easy end gate use. The issue I have had was one of the tail light brackets welds broke. I re welded it myself. The one thing that would make it much handier is to extend the length to accommodate a 4x8 foot sheet of plywood or other building material. 497029

- K2MMT5X7

Cons first. I received this trailer on a Saturday evening, 6:30pm. The 500+lbs palletized box had been loaded onto an enclosed Estes freight truck using a forklift. No thought was given to the fact that the pallet was 8 feet long by almost 6 feet wide. The truck was only equipped with a 5 foot lift gate! The pallet was broken in pieces , as was the box. I'm over 70 and had to climb up into the truck several times as I and the driver unloaded the trailer pieces by hand. The trailer floor alone weighs about 200 lbs! The scattered pieces seemed okay so I signed off. Upon completion of assembly I discovered the lights didn't work. Testing revealed the wiring had been cut INSIDE the frame tube! 20 miles to town, and $50 worth of loom, wire, connectors, end plugs and tape later, the lights work. The license plate bracket would have positioned the plate only a few inches off the ground (on a tilt-bed trailer, no less) so I had to make a mount above the taillight and then 20 miles back to town for a license plate light, $25 later the plate is where it belongs. The sides, front gate and rear gate all go on easily, but don't line up, or, seal well enough to haul dirt, sand, or gravel. The rear gate won't engage the upper latch at all, meaning I have to wrap rope around the trailer to keep the load from sliding right out the back. Although it's advertised that the tailgate will lay down flat for long loads (lumber) it does not, but instead falls to the ground. If you need to haul long loads you'll have to unbolt the tailgate every time as I do. The six tie-downs advertised are only usable when all the sides and gates are removed. If you need to haul an appliance or furniture -- you're out of luck. The gaps around the front and rear gates are so large, you can stick the fingers of your hand right through. Remember that if you discover the hub grease fittings are broken off, as mine was, they are metric. Go to Napa. I'm trying to load some photos so you can see for yourself. Now the pros (positive things). Although I'm deeply embarrassed to be seen pulling this thing down the road, at least it's black, making it almost invisible in my yard -- almost. At the end of it all: trailer, 1 star. etrailer, 4 stars. Etrailer has normally great products, great prices, free shipping, and outstanding customer service. I'm one heck of a disappointed shopper right now, but I'll still take my business to etrailer. Check out the detail photos. 425276

- K2MMT5X7

I have had this trailer for about a year now. I pull it with my Ford Flex. I have found the size, quality, and versatility greatly exceed my expectations. Even though my Flex has a large capacity, the K-2 handles everything from lumber runs to dump runs with no wear on the interior of the Flex. We live on an island and the K-2 has proven its worth many times over. Oh and the build was a breeze but two people makes it much easier. 559287

- K2MMT5X7

Good so far ,only used it 3 times 503940


Ask the Experts about this Detail K2 Trailers

Do you have a question about this Trailer?

  • Carrying a 400 Pound Motorcycle at the Back of an RV
  • The use of any extender is going to reduce the tongue weight capacity of the trailer hitch by 50 percent. So if the tongue weight capacity of your hitch is 750 pounds the use of an extender will reduce it to 375 pounds. Also the further the loaded carrier is away from the hitch the more movement it will have which puts considerably more stress on the hitch so I do not recommend the use of an extender for those 2 reasons. The other option is to use a different carrier; one that is rated...
    view full answer...

  • Which Bearing Buddy Fits the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7
  • I had the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7 pulled from our warehouse and used the Digital Caliper # 301-17068 to find that the hub bore measured 2.041". Although it is slightly larger than the hub bore, I was able to find that the Bearing Buddy that fits a 2.047" hub bore will fit perfectly on the trailer. This size Bearing Buddy comes in Chrome Plated # BB2047 or Stainless Steel # BB2047SS. I have attached some review videos of the Bearing Buddy options for...
    view full answer...

  • Recommended Trailer Hitch for 2008 Volvo C70 Convertible
  • The Curt Trailer Hitch Receiver # C11065 is the only available trailer hitch that is confirmed to fit your 2008 Volvo C70 Convertible. This is a Class I hitch that will provide a 1-1/4 inch receiver opening. If you are looking to pull a lightweight trailer, I recommend checking the towing capacities for your vehicle as listed in the owner's manual to ensure you stay under its limit. I have attached the installation details for you to check out. For trailer lighting, I recommend installing...
    view full answer...

  • Spare Tire and Tire Mount for Detail K2 Mighty Multi A-Frame Utility Trailer
  • You can get a tire and wheel combo to use as a spare for the Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs Item # K2MMT5X7. The trailer uses 5.30-12 load range C tires and a wheel with a 5 on 4-1/2 bolt pattern. So for a spare you can use # AM30850, # AM30820, or # TTWAS53012WS45HP. To mount the spare I recommend attaching Fulton Hi-Mount Spare Tire Carrier - Fits 4- and 5-Lug Wheels Item # FSTC1000301 to the frame at the front of the trailer.
    view full answer...

  • Recommended Motorcycle Carrier or Trailer for Yamaha Majestic 400 Scooter
  • For your Yamaha Majestic 400 Scooter, I recommend the Detail K2 Motorcycle Carrier # K2TMC201. This carrier weighs 87 lbs, so you will need a trailer hitch receiver capable of the tongue weight with your receiver. If you do not have this, then I recommend the Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs # K2MMT5X7 along with the MaxxTow Adjustable, Self-Locking Wheel Chock - 15" to 22" Wheels - 1,800 lbs # MT70271. This will give you a sturdy wheel chock...
    view full answer...

  • Tongue Weight Capacity of a 2017 Jeep Cherokee
  • The only way you can transport a motorcycle with your 2017 Jeep Cherokee is if you placed it on a trailer and towed it behind your vehicle. The problem at hand is that your vehicle is not rated for the tongue weight capacity you need to use the motorcycle carrier and motorcycle. Though a trailer hitch like the Curt Trailer Hitch Receiver part # C13172 which is a fit for your Cherokee has a 750 lb tongue weight capacity, the vehicle is lower and will need to be the figure you abide by. ...
    view full answer...

  • 2017 Jeep Grand Cherokee Options Needed To Tow a Trailer
  • On your 2017 Jeep Grand Cherokee, if you do not already have a 4-flat trailer plug installed, then you will need to install wiring harness to allow you to use the lights on the Detail K2 trailer, # K2MMT5X7. The wiring harness that I recommend is the Tekonsha 4-Pole Flat Connector, # 118384. This harness is designed to plug in to the existing wiring of your Jeep with no cutting or splicing. The harness will allow you to run the trailer lights off your vehicle's lights. Next, you...
    view full answer...

  • Recommended Trailer Hitch Receiver for Mazda 3 to Carry Motorcycle
  • For your 2014 Mazda 3 GT, there are only Class I trailer hitches available. The Class I trailer hitches are only capable of a 200 lb tongue weight, so you will not be able to use a motorcycle carrier like # UF48-979033 or similar you have pictured. You will need to use a trailer for your sport bike to haul behind your vehicle. My recommendation for your vehicle is to start with the Draw-Tite trailer hitch # 24912. Then use ball mount # 3593 and hitch ball # 19258. Then for your trailer...
    view full answer...

  • Trailer Hitch and Towing Capacity for 2018 Buick LaCrosse
  • For your 2018 Buick Lacrosse we do offer hitches and I recommend the USA-made Curt hitch # C12166 which is a 1-1/4-inch Class II type rated for up to 350-lbs of tongue weight and 3500-lbs of towing weight. I recommend this one over the Draw-Tite # 36594 that you referenced because of its higher tongue weight rating of 350-lbs. Your car itself could have different capacities so I checked the online owner's manual to confirm the towing capacity determined by GM. The 2018 Buick LaCrosse...
    view full answer...

  • Recommendation for Towing a Motorcycle with a 2001 Ford Crown Victoria
  • The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13707 for your 2001 Ford Crown Victoria will not have the capacity you are seeking. It is only rated for 400 lbs tongue weight for this type of application so your bike and the carrier will far surpass its capacity. I recommend using a trailer along with this hitch to protect your bike as a carrier will not work with your vehicle. For your wiring, I recommend the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole...
    view full answer...

  • Is There an Option to Lower the Trailer Hitch Receiver for Motorcycle Carrier Use?
  • There really isn't an option to lower your hitch 6 inches and carry 400 lb motorcycle with carrier. The Roadmaster Dual Hitch Receiver Adapter, 6" Drop/Rise # RM-077-6 is the strongest option with a 400 lb tongue weight capacity that doesn't account for the weight of the carrier, so is not a working option. Adapters simply are not strong enough for the tongue weight you are seeking. Your best option is to use the Replacement Shank for Gen-Y Adjustable Ball Mount - 2" Hitch - 7-1/2"...
    view full answer...

  • Compatibility Of Detail K2 Utility Trailer For Carrying Kayaks
  • The Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs # K2MMT5X7 is not designed to carry kayaks, but I don't see any reason why you couldn't attach the kayak carriers to the two end bars. The kayak when strapped in will further restrict movement, so that wouldn't be an issue. The tongue length from coupler to front gate is 44-7/8 inches. The tailgates have a weight capacity of 250 lbs for the front gate and 100 lbs for the rear gate, so your kayak and carrier...
    view full answer...

  • Are Thule Easyline Trailer Kits Available?
  • We offer a few utility trailer kit options, but the Thule Easyline trailer kits were discontinued about about 10 years ago. If you are in the market for a lightweight trailer kit, I recommend looking at either the Detail K2 Mighty Utility Trailer, # K2MMT5X7, which is very similar to the older Thule Easyline trailers or the Detail K2 Multi Utility Trailer, # K2MMT4X6, which has lower sidewalls, but it includes a taller tailgate that can act as a ramp for 4 wheelers and ATVs. I've attached...
    view full answer...

  • Recommended Trailer Hitch Receiver for 2009 Infinity G37 Sedan
  • For your 2009 Infinity G37 sedan, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Class I # 24831. The Class I is all that is available for your vehicle, but will work well to tow a small trailer like you mentioned to tow a couple kayaks or some mulch/wood from time to time. I recommend using ball mount # 3593 with this hitch and a 2 inch hitch ball like # 19258. If you check your coupler and determine you need a 1-7/8 inch diameter ball, then I recommend using # 19256....
    view full answer...

  • Trailer Hitch and Wiring for a 2015 Subaru Impreza Wagon
  • I checked an online version of the owner's manual for the 2015 Subaru Impreza and found the towing capacity to be 1,500 pounds gross trailer weight and 200 pounds tongue weight. I do urge you to check your owner's manual to confirm. Subaru puts towing information in the "Driving Tips" section of the manual. Provided that the gross trailer weight is under the capacity of the vehicle you can tow a trailer. And considering you are looking to tow a utility trailer or kayak trailer you should...
    view full answer...

  • Towing Recommendations with a Toyota Prius
  • When I researched the weight of your Vespa LX50 it exceeds the Class 1 hitch tongue weight that would be compatible with a cargo carrier. An alternative would be to tow your Vespa behind your vehicle using a utility trailer. Although Toyota doesn't recommend towing with your vehicle, if you choose to do it anyway here is an option I can offer you since the recommended towing weight on the hitch is higher. I would recommend the Draw-Tite brand hitch # 24847 and drawbar # 3593. We...
    view full answer...

  • Trailer for Carrying a Motorcycle with a Class I Trailer Hitch Receiver
  • We carry one utility trailer that may work for you. The Detail K2 Mighty Mutli Utility Trailer # K2MMT5X7 is 7-1/2 feet long and carry up to 1,640 pounds. This will be plenty for your motorcycle. However, since you said you have a Class I hitch receiver you should verify that your tow vehicle is rated for towing a trailer and how much weight it can tow. The hitch you purchased will have a rating but you are limited by the lowest rated component which is often the vehicle. If you...
    view full answer...

  • Recommended Ball Mount and Wiring For 2014 Mazda CX-5 to Tow Golf Cart on Trailer
  • Your 2014 Mazda CX-5 has a towing capacity of 2000 lbs which restrict a trailer hitch like # 36601 to that capacity. For your Club Cart Golf Cart, from what measurements and weights I can find online, the Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs # K2MMT5X7 is a great option for you. You will need ramps if you use this trailer like the # 288-07489. This will be a tight fit, but that will help to secure it. You will also need tie downs like the Erickson...
    view full answer...

  • Can Trailer Weight Capacity Be Increased by Changing the Axle
  • Changing out a trailer axle could potentially be considered an upgrade for your trailer so long as the axle was the lowest-rated part of the trailer. This is not always easy to determine unless you happen to be a mechanical design engineer. I would not presume that the deck surface of the trailer can also handle the same increased weight that a higher-capacity axle could. Wheels, tires and the trailer's frame also have a fixed capacity that could be the limiting factor in actual weight...
    view full answer...

  • How to Transport Motorcycle with 2017 Honda Civic
  • The Draw-Tite Class I Sport Frame Receiver Hitch # 24954 referenced in your question is confirmed to fit your 2017 Honda Accord if it is the sedan or hatchback, and it does not feature the center exhaust. This Class I hitch has a 1-1/4 inch opening and a tongue weight capacity of 200 pounds. We do have some motorcycle carriers available, however they are all designed to fit into higher-rated, 2 inch hitch receivers. Most likely, the combined weight of a motorcycle carrier and motorcycle...
    view full answer...

  • Requirements to Tow Mobility Scooter Behind 2001 Chrysler PT Cruiser.
  • Based on my research, you can tow a trailer with your 2001 Chrysler PT Cruiser, but there are several warranty limitations. The owner's manual I found states to never exceed the gross axle weight rating of your vehicle because of the added weight of the trailer hitch's tongue weight or cargo weight. In order to comply with the vehicle's warranty, the following requirements must be met: -The max. frontal area of the trailer cannot exceed 20 sq. ft. -If your vehicle has a manual transaxle,...
    view full answer...

  • How Does Spare Tire Kit for Detail K2 Trailer Mount to the Trailer
  • The u-shaped threaded rod will go around the frame with the threaded ends sticking up (or out) through the wheel and then you bolt it down. I have linked a video showing a similar system that should help.
    view full answer...

  • Recommended Hitch Mounted Motorcycle Carrier for Kawasaki Ninja 650r On 2015 Mazda CX-5 650r?
  • For a hitch mounted carrier, your best bet would be the Ultra-Fab Motorcycle Carrier, part # UF48-979033. The Class III hitches we offer for your CX-5 all have a 525 lb tongue weight capacity. This means that the weight of the bike plus the weight of the carrier you're using can't exceed the tongue weight capacity. With a full tank of gas, your bike weighs about 460 lbs, and when the 45 lb weight of the carrier is added, you'll be very close to that tongue weight capacity so you'll want...
    view full answer...

  • Recommendation to Transport Motorcycle with 2014 Honda Accord
  • The available trailer hitches for your 2014 Honda Accord Sport are all Class I hitches that feature a 1-1/4 inch receiver opening. The Draw-Tite Class I Sport Frame Receiver Hitch # 24899, which is confirmed to fit your vehicle, has a 200 pound tongue weight capacity. There is not a trailer hitch available for your vehicle that features a higher tongue weight capacity. This is likely because the vehicle itself is not rated for heavier loads, as hitch manufacturers will typically try to...
    view full answer...

  • Hitch Recommendations for a 2007 Volkswagen Rabbit with a Dirt Bike
  • The hitches for your 2007 Volkswagen Rabbit have only 1-1/4 inch hitch openings and a 200 lb. tongue weight. Your dirt bike weighs more than that, so your options are limited but I have a solution that will work for you. Please note that you will always want to check your owners manual regarding any towing restrictions or limitations for your vehicle. An alternative to a hitch mounted carrier would be to tow your dirt bike behind your vehicle using a utility trailer. I would recommend...
    view full answer...

  • Detail K2 Trailer MMT5X7 Hub Replacement
  • I reached out to the manufacturer of the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7 and if you have a VIN that begins with L1 then you will use the Trailer Idler Hub Assembly for 2,000-lb Axles - 8" to 12" Wheels - 5 on 4-1/2 # AKIHUB-545-2-2K. If you have a VIN that begins with L4 then you will have a metric spindle that translates to 0.9843 inches and will need to get the replacement directly from the manufacturer.
    view full answer...

  • Ball Mount Rise Recommendation for Towing K2 Mighty Mule Trailer with 2017 Toyota Rav4
  • So the coupler height of the K2 Mule trailer part # K2MMT5X7 is 16 inches from the ground and then the Draw Tite hitch part # 75235 has a height of 13 inches from the ground to the top of the hitch opening. That means you would need a rise ball mount of 3 inches for the trailer to sit level. The part # AMSC4 has a rise of 2-3/4 inches so it will be close enough to work very well. For a 2 inch ball like what the k2 trailer requires you would want the part # A-90.
    view full answer...

  • Can Trailer Hitch Installed on 2013 Nissan Altima Handle Mobility Scooter + Carrier Weighing 300 lbs
  • A Nissan Altima is compatible with a Class I hitch, which has a maximum tongue weight capacity of 200 lbs. The 300 lb chair and lift you mention would seriously overload the hitch, which would damage the hitch and result in the loss of the carrier and the power chair during transport, which would be bad. Your best bet would be to use a different tow vehicle, one that's capable of using a Class III hitch that has a tongue weight capacity of at least 350 lbs. A small trailer like part...
    view full answer...

  • Hitch Mounted Motorcycle/Scooter Carrier Options for 2016 Roadtrek TS Adventurous RV
  • The Ultra-Fab # UF48-979033 Motorcycle/Scooter carrier is the only motorcycle/scooter carrier we offer that's approved for use on a motorhome. The carrier itself has a 500 lb capacity, and according to my research, the weight of your BMW R9T is just under 500 lbs. You'll want to ensure that the hitch on your Roadtrek has a tongue weight capacity greater than the weight of the bike or scooter plus the 45 lb weight of the carrier. The carrier can accommodate tires up to 5 inches wide,...
    view full answer...

  • Recommended Trailer and Vehicle Towing Components for 2013 Hyundai Elantra to Tow a Motorcycle
  • The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24902 is rated for 200 lb tongue weight and 2000 lb towing. This receiver is not compatible at all with a motorcycle carrier that would require a 2 inch trailer hitch receiver and tongue weight rated high enough for your motorcycle's complete weight as well as the carrier's weight. Instead, I recommend you use this hitch along with the ball mount # 3594 and hitch ball # 19258. Then you will need wiring...
    view full answer...

Do you have a question about this Trailer?

  • Why

    At we guarantee:

  • Highest quality trailers for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Satisfaction Guarantee
    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Video Edited:
Zack K
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Expert Research:
John H
Video Edited:
Dustin K
Video Edited:
Chris R
Installed by:
Hayden R
Written by:
Shelly K
Updated by:
Sarah W
Video by:
Zach D

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.