Bolt this locking plate onto your Lippert Helux pin box to prevent the king pin from rotating inside your Demco Autoslide fifth-wheel trailer hitch. Hardware included.
Radial tire has a 16-ply rating and a 4,806-lb max load at 125 psi. 17-1/2" x 6-3/4" Hub-piloted solid center wheel has an 8 on 6-1/2 bolt pattern and +0.19" offset.
2" Diameter round. Waterproof, LED trailer light functions as both a clearance and side marker light. LumenX optics creates a solid panel of light. Recessed mount with grommet (sold separately). Accepts industry-standard sealed plug. PC rated.
Kit provides versatile tie down points for securing cargo in your enclosed trailer, van, or pickup bed. Included are (2) 18" long aluminum tracks and 4 anchor rings. The rings can be set every 2 inches on the track to tie-off all types of items.
This will replace your broken or worn out Dometic RV furnace. This doesn't include a backing plate or access door needed for a new installation. With 40,000 Btu of heat, we recommend this for RVs about 40' long.
You pull off the trail, ready to make camp, and the sun is blazing. In minutes, this awning swings out and secures to cast 270 degrees of shade and shelter. Now, the crew can kick back and even if the wind and rain roll in, everyone stays covered.
Radial special trailer tire with automotive-grade tread has a ply rating of 6 and a 1,480-lb max load at 50 psi. Constructed of double steel belts and double polyester cords with a nylon overlay. Great for highway use. Fits 13" wheels.
With its black Cerakote finish, rocks and road debris can't chip or ding this hitch, so rust doesn't stand a chance. It has a built-in gauge for measuring tongue weight, 2 stainless steel tow balls, and locking pins for extra security.
You're swapping out your RV's AC and need the rest of the system to match. This installation kit from GE Appliances gives you the air distribution box, wall thermostat, and control board you'll need to complete a ductless setup.
Customize your Dometic TRT tent camping experience with this spacious awning. Awning clips onto your rooftop tent and inflates within minutes, providing both shade or a privacy room. Designed for standard height cars. Poles and carry bag included.
This is a rave-worthy upgrade for your RV. It extends far enough for you to grab hold before taking the first step up, and it folds flat without obstructing your door or slide out. Feels sturdier and looks better than what you're used to.
UV-resistant inner skylight replaces the worn or damaged one in your RV or camper roof. The 16" wide x 24" long flange fits over a standard 14" wide x 22" long cutout. Cracked ice polycarbonate top diffuses light to reduce glare.
Required in most states, a safety cable acts as a backup if your trailer becomes disconnected from your tow vehicle. cables to your trailer's coupler, and then hook the S-hooks to your hitch.
If you only have a couple steps up outside your RV door, this shorter telescoping handrail will be a better size. The 48" rail folds flat against your RV with a sleek, low-profile look that won't obstruct the door.
2-1/2" x 2-1/2" Receiver tube is designed for fabricating a custom hitch when a receiver isn't available. Weld-on installation. Tube is 12" long. Raw steel construction is durable.
These edge glides give you a smooth transition from the ground onto your ramps or trailer. Glides minimize friction for snowmobiles but include traction knobs so you can still walk on them safely, or load up your favorite offroad toy.
Go the extra mile with your Tow & Stow ball mount - from the field to the job site, back to weekends camping with the family - by adding this 2-tang clevis. Just attach it to your ball mount's shank with your existing pins.
Get ultimate towing and hauling versatility with this adjustable drop hitch adapter. Move the stacked receivers up and down to get up to a 10" drop or rise, and use certain accessories - like your cargo carrier and bike rack - at the same time.
Replaces the #05 rubber shear spring on MORryde's rubber pin boxes for trailers between 14,001 - 18,000 lbs GVWR. Helps absorb and dampen road shock, vibration, and reduces chucking. Installs on the skid pad with your existing hardware.
Versatile 3/4" red LED works as a clearance, marker, or third brake light. Sealed, submersible housing is great for boat trailers. Installs with a rubber grommet. 3-wire setup with bullet connectors for easy hookup. PC rated.