New Arrivals

This surge actuator lets your trailer's drum brakes work without a brake controller, so any truck can tow safely. That flexibility is why they're ideal for rental and fleet trailers. Plus, the black powder coat resists scuffs from daily use.

• Brake Actuator
• Straight Tongue Trailer Coupler
• Surge Brake Actuator
• Boat Trailer
• Travel Trailer
• Utility Trailer
• Bolt-On
• 7500 lbs GTW
• 2 Inch Ball Coupler
• Drum Brakes
• No Lockout
• Demco

This coupler lock helps prevent the theft of your 30K gooseneck trailer with a Demco coupler.

• Gooseneck Trailer Locks
• Gooseneck Base Lock
• Demco Couplers
• Steel
• Demco

This surge actuator lets your trailer's disc brakes work without wiring or a brake controller, so nothing electrical sits in the water. That makes it ideal for boat trailers. And since it's zinc plated, you can get it wet without it rusting.

• Brake Actuator
• Straight Tongue Trailer Coupler
• Surge Brake Actuator
• Travel Trailer
• Boat Trailer
• Utility Trailer
• Bolt-On
• 8600 lbs GTW
• 2 Inch Ball Coupler
• Disc Brakes
• No Lockout
• Demco

This hitch slides automatically as you drive to give you 14" of additional clearance for tight turns. A wraparound jaw provides a smooth ride and a locking bar offers added security. Pivoting head allows easy hook up and helps to limit chucking.

• 5th Wheel Hitch
• Sliding Fifth Wheel
• Above Bed Rails
• 4500 lbs Vertical Load
• 18000 lbs GTW
• Double Pivot
• 16-1/2 - 19-1/4 Inch Tall
• 14 Inch Fore/Aft Travel
• Demco

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

• Trailer Hitch
• Custom Fit Hitch
• Class I
• 200 lbs TW
• 2000 lbs GTW
• Concealed Cross Tube
• Draw-Tite

You deal with mud, rain, and cold mornings. This binder is made for all of it. Extend it out to reach your chains, then tighten it down or spin it free when you need to move fast. When the job's done, fold the handle away and hit the road.

• Car Tie Down Straps
• Tie Down Straps
• Chain Binders
• Ratchet Chain Binder
• Grab Hooks
• 12000 lbs
• 14-1/4 Inch Handle
• Folding Handle
• 3/8 - 1/2 Inch Chain Links
• Red
• Durabilt

You work with the biggest equipment and the toughest loads. This chain binder delivers the strength and control you need to get the job done right. It's built for demanding hauls and rough conditions, so you can count on it every day.

• Car Tie Down Straps
• Tie Down Straps
• Chain Binders
• Ratchet Chain Binder
• Grab Hooks
• 18100 lbs
• 15 Inch Handle
• 1/2 - 5/8 Inch Chain Links
• Red
• Durabilt

You deal with mud, rain, and cold mornings. This binder is made for all of it. Extend it out to reach your chains, then tighten it down or spin it free when you need to move fast. When the job's done, fold the handle away and hit the road.

• Chain Binders
• Car Tie Down Straps
• Tie Down Straps
• Ratchet Chain Binder
• Grab Hooks
• 7100 lbs
• 14-1/4 Inch Handle
• Folding Handle
• 5/16 - 3/8 Inch Chain Links
• Red
• Durabilt

If you've ever lost a weekend to trailer trouble, you know how important bearing protection is. The Vault system has a fully sealed, pressurized chamber that keeps out water and grit, and hybrid oil self-lubricates where it's needed.

• Trailer Bearings Races Seals Caps
• Caps
• Bearing Protector Grease Cap
• 4200 lbs Axle
• 5200 lbs Axle
• Dexter

The best trips aren't about the miles, they're about how easy the ride feels. Swap in new ABS brake assemblies and your trailer will track steadier and stop smoother, so mountain grades, crosswinds, and sudden traffic don't rattle you.

• Trailer Brakes
• Electric Drum Brakes
• Standard Grade
• ABS
• Self Adjust
• 12-1/4 x 2-1/2 Inch Drum
• 7500 lbs Axle
• 16-1/2 Inch Wheel
• 15 Inch Wheel
• 16 Inch Wheel
• 17-1/2 Inch Wheel
• 17 Inch Wheel
• Dexter

• Trailer Bearings Races Seals Caps
• Bearings
• Standard Bearings
• Bearing Kits
• 2.25 Inch I.D.
• Bearing 15123 and 25580
• Race 25520 and 15245
• 6000 lbs Axle
• Dexter

Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing (L68149) and outer bearing (L44649), inner race (L68111) and outer race (L44610), grease seal, a cotter pin, and a dust cap.

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Bearing L44649 and L68149
• Race L68111 and L44610
• 3500 lbs Axle
• Dexter

This 3-quart hydraulic pump makes operating dump trailers and other systems easy, letting you lift, lower, or let things down by gravity. It comes with a handy handheld pendant with a removal cord and start solenoid.

• Dump Trailer Parts
• Hydraulic System
• Hydraulic Pumps
• 3 Qt
• Dexter

Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.

• Trailer Hubs and Drums
• Hub with Drum
• ABS
• Oil Bath
• 25580 / 14125A
• Standard Grade
• For 7000 lbs Axles
• For 5200 lbs Axles
• For 6000 lbs Axles
• 8 on 6-1/2 Inch
• 17 Inch Wheel
• 16 Inch Wheel
• 16-1/2 Inch Wheel
• 17-1/2 Inch Wheel
• Dexter

Round trailer axle beam measures 91" from hub face to hub face and 74-1/2" from spring center to spring center. E-Z Lube spindles simplify bearing maintenance. Axle includes welded spring seats, brake flanges, and spindles.

• Trailer Axles
• Leaf Spring Suspension
• Standard Grade
• No Hubs
• 4400 lbs
• Spindles Only
• 91 Inch Hub Face
• No Drop or Lift
• Dexter

Drop trailer coupler features an over-center latch mechanism that only engages when the coupler is fully seated on a 2-5/16" hitch ball.

• Straight Tongue Trailer Coupler
• Standard Coupler
• 2-5/16 Inch Ball Coupler
• Weld-On
• 20000 lbs GTW
• 3 Inch Channel
• Standard Grade
• Dexter

Tilt deck kit makes loading and unloading vehicles easier without ramps. Includes cylinder assembly, hydraulic fittings, supports, clamps, hinges, and safety signs.

• Dump Trailer Parts
• Lifting System
• Tilt Deck Kits
• Dexter

Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.

• Trailer Hubs and Drums
• Hub with Drum
• Oil Bath
• ABS
• 25580 / 14125A
• Standard Grade
• For 7000 lbs Axles
• 8 on 6-1/2 Inch
• 16-1/2 Inch Wheel
• 17-1/2 Inch Wheel
• 16 Inch Wheel
• 17 Inch Wheel
• Dexter

Replace worn DB-35 brakes with this complete Dexter disc brake kit for 3.5K axles. Includes 10" zinc rotors, bearings, seals, grease caps, and hardware for 1-3/8" straight spindles typically found on Ranger boats.

• Trailer Brakes
• Disc Brakes
• Marine Grade
• 5 on 4-1/2 Inch
• Rotor
• 3500 lbs Axle
• 15 Inch Wheel
• 14-1/2 Inch Wheel
• 14 Inch Wheel
• 13 Inch Wheel
• Dexter

• Trailer Bearings Races Seals Caps
• Bearings
• Standard Bearings
• Bearing Kits
• 2.25 Inch I.D.
• Bearing 02675 and 25580
• Race 25520 and 02420
• 8000 lbs Axle
• 7200 lbs Axle
• Dexter

Protect your trailers wheel bearings with these 2.72" OD grease caps. Zinc-plated steel resists corrosion, and the drive-in design installs easily. Designed for 12" x 2" Dexter 8-bolt hubs. Includes 2 caps.

• Trailer Bearings Races Seals Caps
• Caps
• Standard Grease Cap
• 2.72 Inch O.D.
• 6000 lbs Axle
• 5200 lbs Axle
• 7000 lbs Axle
• Dexter

Replacement U-Bolt plate helps to secure one end of your 2-3/8" diameter trailer axle to a 2" wide leaf spring. Designed for use with 3,500-lb, heavy-duty Dexter axles. 3/16" Thick steel plate ensures strength.

• Trailer Suspension Parts
• U-Bolt Plates
• Snowmobile Trailer
• Boat Trailer
• 3500 lbs
• Round Axle - 2-3/8 Inch
• Dexter

Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.

• Trailer Hubs and Drums
• Hub with Drum
• ABS
• Oil Bath
• 25580 / 14125A
• Standard Grade
• For 7000 lbs Axles
• 8 on 6-1/2 Inch
• 16 Inch Wheel
• 17 Inch Wheel
• 16-1/2 Inch Wheel
• 17-1/2 Inch Wheel
• Dexter

Get smooth, reliable braking with this Dexter hydraulic drum brake kit. Designed for 9K-10K axles, these self-adjusting brakes reduce maintenance while delivering strong stopping power. Assemblies include parking brake levers for extra control.

• Trailer Brakes
• Hydraulic Drum Brakes
• Standard Grade
• Dual Servo
• Self Adjust
• 12-1/4 x 3-3/8 Inch Drum
• 9000 lbs Axle
• 10000 lbs Axle
• 16 Inch Wheel
• 15 Inch Wheel
• 16-1/2 Inch Wheel
• 17 Inch Wheel
• 17-1/2 Inch Wheel
• Dexter