New Arrivals

This super adjustable hitch gives you a whopping 21-1/4" of drop and 21" of rise. With 2 different sizes of hitch balls and a gross towing weight of up to 22,000 lbs, you really can tow just about any trailer with your lifted truck.

• Drop Hitch
• Trailer Hitch Ball Mount
• Adjustable Ball Mount
• Two Balls
• 2-5/16 Inch Ball
• 2 Inch Ball
• Steel Shank - Matte Black
• Rise - 21 Inch
• Drop - 21 Inch
• 22000 lbs GTW
• BulletProof Hitches

This aluminum, adjustable ball mount lets you tow up to 10,000 lbs with the 2" ball or 14,000 lbs with the 2-5/16" ball. Can be used in a 4" drop or rise position. Fits 2" x 2" hitch receivers.

• Drop Hitch
• Trailer Hitch Ball Mount
• Adjustable Ball Mount
• Two Balls
• 2-5/16 Inch Ball
• 2 Inch Ball
• Aluminum Shank - Silver
• Rise - 4 Inch
• Drop - 4 Inch
• 14000 lbs GTW
• BulletProof Hitches

Your strap's in place, the tree's solid, and now all that force runs through this shackle. You thread the pin, give it one last check, and step back knowing this is what's going to get you out of the mess that you got yourself into.

• Tow Shackles
• Shackle Only
• Tie On
• Steel
• 36000 lbs WLL
• 1-3/8 Inch Pin Diameter
• Black
• BulletProof Hitches

Designed for motorcycle and dirt bike tires that are 2" to 6" wide, this chock clips right into the E-track in your trailer. Position the chock at 45 degrees to the left or right, or at 90 degrees - whatever works best for your setup.

• Wheel Chocks
• E Track
• E Track Wheel Chocks
• Brophy

Rust-resistant, zinc-plated brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and remove.

• Truck Camper Tie Downs
• Front and Rear Tie-Downs
• Bed-Mounted
• Universal Fit
• Zinc Coated Steel
• Brophy

Protect your truck bed with a custom-fit liner that cushions cargo and shields against dents and spills. Its 3/4" thick, stain-resistant material is knee-friendly and easy to clean. Installs with hook-and-loop fasteners - no drilling required.

• Truck Bed Mats
• Custom-Fit Mat
• Trucks w Spray-In Liners
• Bare Bed Trucks
• 3/4 Inch Thick
• Full Bed Protection
• BedRug

Get ultimate adjustability for your pintle hitch with this mount. Attach your pintle hook (sold separately) to the plate and then easily slide the plate up or down the shank, securing it with the included pins and clips, to change the height.

• Pintle Hitch
• Mounting Plate Only
• Adjustable Height
• 10000 lbs GTW
• 2 Inch Hitch Mount
• Standard Shank
• Brophy

Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.

• Truck Camper Tie Downs
• Front and Rear Tie-Downs
• Bed-Mounted
• Universal Fit
• Powder Coated Steel
• Brophy

Get ultimate adjustability for your pintle hitch with this mount. Attach your pintle hook (sold separately) to the plate and then easily slide the plate up or down the shank, securing it with the included pins and clips, to change the height.

• Pintle Hitch
• Mounting Plate Only
• Adjustable Height
• 10000 lbs GTW
• 2 Inch Hitch Mount
• Standard Shank
• Brophy

Get ultimate adjustability for your pintle hitch with this mount. Attach your pintle hook (sold separately) to the plate and then easily slide the plate up or down the shank, securing it with the included pins and clips, to change the height.

• Pintle Hitch
• Mounting Plate Only
• Adjustable Height
• 10000 lbs GTW
• 2 Inch Hitch Mount
• Standard Shank
• Brophy

The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup with no drilling required.

• Truck Camper Tie Downs
• Front and Rear Tie-Downs
• Bed-Mounted
• Universal Fit
• Powder Coated Steel
• Brophy

If you've ever guessed at your trailer's tongue weight and hoped for the best, you're not alone. This compact scale gives you a quick, one-handed way to check weight at the coupler. It even comes with a SnapPad for added grip.

• Tongue Weight Scale
• Analog Scale
• 2000 lbs
• Big Truck Big RV

Go the extra mile with your Tow & Stow ball mount - from the field to the job site, back to weekends camping with the family - by adding this 2-tang clevis. Just attach it to your ball mount's shank with your existing pins.

• Clevis Hitch
• Clevis Adapter
• 2 Inch Hitch Mount
• No Shank
• B and W

B&W is known for building hitches people trust. Made in the USA and made to last. This one bolts right on, with the receiver just below the bumper for easy access. Powder-coated steel holds up against rust, grime, and plenty of road trips.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 675 lbs TW
• 4500 lbs GTW
• Concealed Cross Tube
• B and W

Want to see your tongue weight at a glance instead of trying to read a tiny dial? Then get ready for this digital scale. We love pretty much everything B&W puts out, so we're really excited to get our hands on this guy too!

• Tongue Weight Scale
• Digital Scale
• B and W

Drop in a Companion and skip the rails. This custom underbed kit gives you a clean fifth-wheel setup that clears the bed when you're done. Flip the ball, pull the hitch, and haul whatevers next - no rails, no drama, just a solid setup that works.

• 5th Wheel Hitch Rails
• Custom
• Below the Bed
• B and W

B&W is known for building hitches people trust. Made in the USA and made to last. This one bolts right on, with the receiver just below the bumper for easy access. Powder-coated steel holds up against rust, grime, and plenty of road trips.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 675 lbs TW
• 4500 lbs GTW
• Concealed Cross Tube
• B and W

Go the extra mile with your Tow & Stow ball mount - from the field to the job site, back to weekends camping with the family - by adding this 2-tang clevis. Just attach it to your ball mount's shank with your existing pins.

• Clevis Hitch
• Clevis Adapter
• 2-1/2 Inch Hitch Mount
• No Shank
• B and W

B&W is known for building hitches people trust. Made in the USA and made to last. This one bolts right on, with the receiver just below the bumper for easy access. Powder-coated steel holds up against rust, grime, and plenty of road trips.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 750 lbs TW
• 5000 lbs GTW
• Concealed Cross Tube
• B and W

Want a premium, US-made hitch that can be removed to leave your bed totally free? Need a slider to get you through those tight turns? How about the option of towing a gooseneck trailer when you're done with the camper? You got it.

• 5th Wheel Hitch
• Sliding Fifth Wheel
• Aftermarket Below Bed Rails
• 5000 lbs Vertical Load
• 20000 lbs GTW
• Double Pivot
• 17 - 19 Inch Tall
• 12 Inch Fore/Aft Travel
• B and W

Flip and stow this pintle hook combo beneath your hitch for a sleek look when you are done towing. Haul up to 16,000 lbs with the pintle hook, up to 10,000 lbs with the 2" ball, and up to 16,000 lbs with the 2-5/16" ball.

• Pintle Hitch
• Trailer Hitch Ball Mount
• Drop Hitch
• Adjustable Ball Mount
• Two Balls
• 2 Inch Ball
• 2-5/16 Inch Ball
• Steel Shank - Matte Black
• Rise - 3 Inch
• Drop - 7 Inch
• 16000 lbs GTW
• Built-In Pintle Hook
• B and W

Want a premium, US-made hitch that can be removed to leave your bed totally free? How about the option of towing a gooseneck trailer when you're done with the camper? Get the best of all worlds with this premium B&W pairing.

• 5th Wheel Hitch
• Fixed Fifth Wheel
• Aftermarket Below Bed Rails
• 5000 lbs Vertical Load
• 20000 lbs GTW
• Double Pivot
• 16-1/4 - 18-1/4 Inch Tall
• B and W

The dual jaw on this hitch offers a secure connection with 360-degree jaw-to-king-pin contact. Durable polyurethane bushings limit rattle and vibration. Base adjusts for ideal vertical and fore/aft positioning. Custom installation kit included.

• 5th Wheel Hitch
• Fixed Fifth Wheel
• Above Bed Rails
• 4000 lbs Vertical Load
• 16000 lbs GTW
• Double Pivot
• 16 - 19 Inch Tall
• B and W

B&W is known for building hitches people trust. Made in the USA and made to last. This one bolts right on, with the receiver just below the bumper for easy access. Powder-coated steel holds up against rust, grime, and plenty of road trips.

• Trailer Hitch
• Custom Fit Hitch
• Class III
• 750 lbs TW
• 6000 lbs GTW
• Concealed Cross Tube
• B and W