New Arrivals

Pull the front-facing plunger pin on this heavy-duty jack to release the drop leg for an extra 13-1/2" of lift. Get maximum lifting power in low gear and fast cranking in high gear. Sidewind crank (TJD-12000-HD) sold separately.

• Trailer Jack
• Enclosed Trailer
• Side-Mount Jacks
• Standard Grade
• 9001 - 10000 lbs
• Manual Jack
• Weld-On
• With Rectangle Foot
• etrailer

Get started adding a portable solar setup to your RV with a 100 watt folding panel and a PWM solar charge controller. Includes wiring for a basic install, or you can use other inlets or adapters (sold separately) to customize your setup.

• Portable Solar Panel
• RV Solar Panels
• With Solar Charge Controller
• RV Solar Prep
• Battery
• 51 - 100 Watts
• 0.1 - 5 Amps
• Gel
• Lithium-ion
• Flooded Lead Acid
• AGM
• etrailer

Slipper leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 10,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushing with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Slipper Springs
• Flat End
• 10000 lbs
• 2-1/2 Inch Wide
• 30-1/2 Inch Long
• etrailer

• Trailer Bearings Races Seals Caps
• Bearings
• Standard Bearings
• Bearing Kits
• 2.250 Inch I.D.
• Bearing 14125A and 25580
• Race 25520 and 14276
• 7000 lbs Axle
• Dexter

Grease caps fit trailer hubs with 1.99" inner diameter and has corrosion-resistant zinc plating.

• Trailer Bearings Races Seals Caps
• Caps
• Standard Grease Cap
• 1.99 Inch O.D.
• Dexter

Convenient kit contains everything you need to replace the bearings and seal on a single trailer hub: inner bearing and outer bearing (L44649), inner race and outer race (L44610), grease seal, and a cotter pin.

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Bearing L44649
• Race L44610
• Dexter

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,500-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 2500 lbs
• 1-3/4 Inch Wide
• 23-1/8 Inch Long
• Painted
• Dexter

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 6,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 6000 lbs
• 1-3/4 Inch Wide
• 25-3/8 Inch Long
• Painted
• Dexter

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Standard Bearings
• 1.250 Inch I.D.
• Bearing L44649
• Race L44610
• Dexter

Cap assemblies replace the grease caps on your Dexter or Tie Down Vortex trailer hubs. Includes 2 threaded caps that fit 2,500-lb to 4,200-lb hubs.

• Trailer Bearings Races Seals Caps
• Caps
• Standard Grease Cap
• Dexter

Grease caps fit EZ lube trailer hubs with 2" inner diameter. Includes rubber lube plug for EZ Lube axles.

• Trailer Bearings Races Seals Caps
• Caps
• EZ Lube Grease Cap
• 1.99 Inch O.D.
• Dexter

Powerful hydraulic jack with self-contained pump and power unit lets you lift heavy loads with a press of a button. Pivoting foot pad stabilizes the jack on rough terrain.

• Trailer Jack
• Gooseneck Trailer
• 5th Wheel Trailer
• Enclosed Trailer
• Dump Trailer
• Side-Mount Jacks
• 10001 lbs or More
• Hydraulic Jack
• Bolt-On
• With Rectangle Foot
• Dexter

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 2,800-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Leaf Springs
• Trailer Suspension Parts
• Double Eye Springs
• 2800 lbs
• 1-3/4 Inch Wide
• 20-1/2 Inch Long
• Painted
• Dexter

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 7,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 7000 lbs
• 1-3/4 Inch Wide
• 24-7/8 Inch Long
• Painted
• Dexter

• Trailer Bearings Races Seals Caps
• Bearings
• Bearing Kits
• Standard Bearings
• 1.720 Inch I.D.
• Bearing L44649 and L68149
• Race L68111 and L44610
• 3500 lbs Axle
• Dexter

Rust-resistant kit replaces the hub on your trailer idler axle. Fits 2,700-lb axles. Inner bearing L44649, outer bearing L44649, grease seal, grease cap, cotter key, wheel bolts, and lug nuts included. Bearings and hub cavity come pre-greased.

• Trailer Hubs and Drums
• Hub
• Pre-Greased
• Standard
• L44649 / L44649
• Marine Grade
• For 2700 lbs Axles
• 5 on 4-1/2 Inch
• 10 Inch Wheel
• 12 Inch Wheel
• 8 Inch Wheel
• Dexter

Use this corrosion-resistant actuator to synchronize your trailer brakes with your tow-vehicle brakes. Drop-N-Go auto-latch coupler automatically locks your coupler in place on 2" hitch balls. Designed for hydraulic drum brake applications.

• Brake Actuator
• Straight Tongue Trailer Coupler
• Surge Brake Actuator
• Farm Trailer
• Construction Trailer
• Boat Trailer
• Travel Trailer
• Utility Trailer
• Bolt-On
• 6600 lbs GTW
• 2 Inch Ball Coupler
• Drum Brakes
• No Lockout
• Dexter

Hub-and-rotor assembly works with 4,200-lb Dexter disc brakes. Zinc finish protects against corrosion. Vented design prevents heat-related damage.

• Trailer Hubs and Drums
• Hub with Integrated Rotor
• Standard
• L68149 / L44649
• Marine Grade
• For 4200 lbs Axles
• 5 on 4-1/2 Inch
• 14-1/2 Inch Wheel
• 15 Inch Wheel
• 14 Inch Wheel
• Dexter

Double-eye leaf spring acts as part of a trailer's suspension system by providing an attachment point for a 3,000-lb axle. Spring flexes to resist shock and also ensures a smooth ride. Includes bushings with 9/16" inner diameter.

• Trailer Suspension Parts
• Trailer Leaf Springs
• Double Eye Springs
• 3000 lbs
• 1-3/4 Inch Wide
• 25-1/4 Inch Long
• Painted
• Dexter

Straight-tongue coupler bolts onto your 3" wide trailer tongue. Pull trigger and pull up on the latch to open the ball socket. The oily finish offers rust resistance.

• Straight Tongue Trailer Coupler
• Standard Coupler
• 2 Inch Ball Coupler
• Bolt-On
• 3500 lbs GTW
• 3 Inch Channel
• etrailer

Step on the dual-pin foot lever on this heavy-duty jack to use the drop leg hands-free - makes up half the total travel. Best for gooseneck setups where you can step between the truck and trailer. Heavy-duty jack screw can lift up to 5 tons.

• Camper Jacks
• Trailer Jack
• Car Hauler
• 5th Wheel Trailer
• Gooseneck Trailer
• Enclosed Trailer
• Side-Mount Jacks
• Standard Grade
• 10001 lbs or More
• Manual Jack
• Weld-On
• With Rectangle Foot
• etrailer

PVC wye is used for connecting drain pipes to the drain-waste-vent stack. Joins 3" PVC pipe, commonly used in mobile homes or other residential plumbing.

• RV Sewer Hose Fittings
• Sewer Couplers and Nipples
• Pipe Couplers
• Hub
• Drain Pipe to Drain-Waste-Vent System
• 3 Inch Diameter
• LaSalle Bristol

1/2" NPT threaded cap is a good replacement for caps on drains on water heaters that you may have lost or misplaced. It's also used to run pressure tests in newly installed freshwater lines.

• RV Fresh Water
• Caps
• Test Cap
• NPT
• LaSalle Bristol

Replace the waste valve from your RV's black-water tank with a cable-actuated gate valve. 150" Cable lets you open and close the valve even if it's in a hard-to-reach place. Non-stick seals resist cracking. Installs on 1-1/2" pipe.

• RV Waste Valves
• Straight Valve
• Single Waste Valve - Cable Actuated
• 1-1/2 Inch Spigot
• 3 Inch Hub
• Stationary Valve
• LaSalle Bristol