New Arrivals

Free-backing, hydraulic trailer brake assembly won't engage when you reverse, even if your hydraulic actuator is activated. Mounting flanges have a 5-bolt pattern. Fits 16" and larger wheels. Corrostion-resistance is ideal for boat trailers.

• Accessories and Parts
• Trailer Brakes
• Hydraulic Drum Brakes
• LH
• 12000 lbs
• Brake Assembly
• 12 x 2 Inch Drum
• Dexter

Replaces the "D" washers, retainer nuts, and hex nuts needed to secure the brake hubs on your Dexter trailer axle manufactered after June of 2002. Includes 2 "D" washers, 2 retainer nuts, and 2 hex nuts.

• Accessories and Parts
• Trailer Spindles
• Trailer Axles
• Trailer Suspension Parts
• Spindle Retainer Kit
• Dexter

Restore the performance of your Fortress oil cap with this complete service kit. Includes rubber plugs, oil fill plugs, and O-ring seals to prevent leaks, maintain pressure, and keep your hub looking squeaky clean.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

This replacement inner member slide easily fits into the existing housing of your Dexter A-84 Series or Legacy UFP surge brake actuator. For use with single or double-axle trailers with hydraulic disc brakes.

• Accessories and Parts
• Brake Actuator
• Disc Brakes
• Inner Member
• Dexter

Upgrade your boat trailer's braking power with this rust-resistant GalvX disc brake. Kit includes 1 pre-greased hub, inner (L68149) and outer (L44649) bearings, rotor, caliper, mounting brackets, and lug nuts.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• LH
• RH
• 3500 lbs
• Brake Assembly
• Hub and Rotor Assembly
• Dexter

Replaces the shoe and roller for your passenger's-side Dexter 15,000-lb 12-1/4" x 5" air brake.

• Accessories and Parts
• Trailer Brakes
• Brake Shoes
• Dexter

Your Fortress bolt-on cap has been holding it together - now it's time to return the favor. This service kit gives your Fortress cap fresh gaskets, oil fill plugs, and hardware it needs to stay leak-free and pressure tight.

• Accessories and Parts
• Trailer Bearings Races Seals Caps
• Service Kit
• Dexter

This replacement inner member slide fits into the existing outer member housing of your Dexter or Tie Down surge brake actuator. Fits actuator models LP80, LP85, and LP8500.

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• Inner Member
• Dexter

Replace worn or leaking copper washers on your Dexter disc brake caliper. These 7/16" crush washers provide a tight, reliable seal between the banjo fittings and calipers to help prevent brake fluid leaks in your hydraulic braking system.

• Accessories and Parts
• Trailer Brakes
• Disc Brakes
• Caliper Parts
• Hardware
• Washers
• Dexter

EVs put more stress on tires. Counteract EV Lube locks them in. This synthetic, non-petroleum formula adds extreme adhesion to reduce slippage and protect beads and rims. A secure fit means better performance, longer tire life, and peace of mind.

• Accessories and Parts
• Boat Trailer Wheels
• Trailer Tires and Wheels
• Tire Mounting Compound
• Counteract

Replace the lost or damaged center pin for your Curt PowerRide fifth-wheel trailer hitch. Pin secures the 5th wheel head to the hitch body.

• Accessories and Parts
• 5th Wheel Hitch
• Pins and Clips
• CURT

Heavy-duty replacement support brackets fit Curt TruTrack 2P weight distribution systems with integrated active sway control. Allows you to mount your spring bars on trailer frames up to 6".

• Accessories and Parts
• Weight Distribution Hitch
• Sway Control Parts
• Brackets
• CURT

Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.

• Accessories and Parts
• Trailer Brake Controller
• Wiring Adapter
• Plugs into Brake Controller
• Vehicle Specific
• CURT

Replaces the clevis pin and clip for your Curt TruTrack 2P trailer-mounted weight distribution system (17510). Secures hitch head to shank-and-horn assembly.

• Accessories and Parts
• Weight Distribution Hitch
• Pins and Clips
• Pins
• CURT

Replaces the rotary knob for your Curt Spectrum trailer brake controller (C51170). Dash-mounted knob keeps your vehicle interior looking sleek while giving you easy access to the brake controller.

• Accessories and Parts
• Trailer Brake Controller
• Control Knob
• CURT

Replaces the white screw-on cap with level for your Stromberg Carlson electric tongue jack.

• Accessories and Parts
• Trailer Jack
• Camper Jacks
• Caps
• Level
• Stromberg Carlson

Replaces 1 standoff for your Stromberg Carlson universal exterior RV ladder. Fits Stromberg Carlson exterior RV ladder (LA-401 and LA-401BA).

• Accessories and Parts
• RV Ladders
• Stand Off
• Stromberg Carlson

This is a rave-worthy upgrade for your RV. It extends far enough for you to grab hold before taking the first step up, and it folds flat without obstructing your door or slide out. Feels sturdier and looks better than what you're used to.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Telescoping Handrail
• Stromberg Carlson

Covers both bars of your Lend-a-Hand Extended Assist RV grab handle with colorful, comfortable grips. Zips on for a simple installation. Zips off for washing or storage. Constructed of UV resistant neoprene with a soft rubber backing. Charcoal color.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Covers
• Stromberg Carlson

Replaces the mounting brackets and screws for your Lend-A-Hand and Mini Lend-A-Hand grab handles.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Hardware
• Stromberg Carlson

Covers the surface of your Lend-a-Hand RV grab handle with a colorful, comfortable grip. Zips on for a simple installation. Zips off for washing or storage. Constructed of UV resistant neoprene with a soft rubber backing. Charcoal color.

• Accessories and Parts
• RV Steps
• Grab Handles and Handrails
• Covers
• Stromberg Carlson

Replaces the switch boots for your Stromberg Carlson electric tongue jack.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Switches
• Toggle Switch Boot
• Stromberg Carlson

Replacement bracket for Rack'Em enclosed trailer shelving systems. Securely holds 2x4 or 2x6 boards to create or reinforce storage shelves in your trailer.

• Accessories and Parts
• Trailer Cargo Organizers
• Spare Tire Mount
• Hardware
• Brackets
• RackEm

Replaces the rails for your Pace Edwards Full-Metal JackRabbit retractable tonneau cover (311-FMFA18A44) or for your Pace Edwards JackRabbit retractable tonneau cover (311-JRFA18A44).

• Accessories and Parts
• Tonneau Cover
• Rails
• Pace Edwards JackRabbit
• Pace Edwards Full-Metal JackRabbit
• Pace Edwards