Detail K2 Elite Snowplow for 2" Hitches - 84" Wide x 22" Tall
Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: K2AVAL8422ELT,65005
Our Price: $2,362.17
This item qualifies for Free Truck Freight Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meDetail K2 Elite Snowplow for 2" Hitches - 84" Wide x 22" Tall
part number: K2AVAL8422ELT
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab.
Features:
- Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
- Electric actuator raises and lowers plow smoothly and consistently
- Wireless remote control lets you operate plow from the warmth of your cab
- Internal clutch prevents damage caused by overextension of actuator
- Simple, chain-lifting design has fewer moving parts than other plow-lifting devices for a longer-lasting system
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Strong rubber deflector on top of plow directs snow down and away from your windshield
- Hardened steel edge breaks up packed snow and ice
- Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
- Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
- Can extend life of the plow if you hit an obstruction
- Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
- Wheel height is adjustable to match your vehicle height
- Plow handle with knob lets you easily move plow up and down during mounting
- Safety chain holds plow in raised position during travel
- Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
- ISO certified
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
Specs:
- Application: 2" x 2" hitch receivers
- Cannot be used with hitches or receiver adapters that have built-in drops
- Blade dimensions: 84" wide x 22" tall
- 3 Blade angles:
- Left 45 degrees
- Straight ahead
- Right 45 degrees
- Distance from center of hitch pin hole to the front edge of plow: 50"
- Weight: 283 lbs
- 1-Year limited warranty
The Detail K2 Elite snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled wireless actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Elite snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
The Elite snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Smooth, Controlled Lifting with Electric Actuator
The electric actuator on this plow allows you to lift and lower the blade using either a toggle switch that installs in your cab or the included wireless remote control.
To raise the plow, use the switch or remote to activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. This simple, chain-lifting design has fewer moving parts than other plow-lifting devices, so the setup is less complicated and there are fewer parts to have to repair or replace.
This actuator lifts and lowers the snowplow blade smoother than an electric winch. In addition, fewer amps are required to run an actuator than to operate an electric winch, which means that the solenoid on the Detail K2 Elite will last twice as long as the solenoid on a plow that uses a winch. There is also a built-in clutch that prevents damage to the actuator if you try to raise the blade too high or drop it too low. The electric actuator is built to withstand extreme temperatures and wet conditions with its completely sealed gearbox and housing.
Detail K2 Features
The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.
Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.
Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.
AVAL8422ELT Detail K2 Elite Hitch Mount Snow Plow - 84" Wide x 22" Tall Blade
Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: 65005
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
65005 Draw-Tite Front-Mount Trailer Hitch Receiver
Item # 65005
California residents: click here
Customer Reviews
Detail K2 Elite Snowplow for 2" Hitches - 84" Wide x 22" Tall - K2AVAL8422ELT
Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 65005
Average Customer Rating: 4.8 out of 5 stars (113 Customer Reviews)
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Brad02/20/2024
Great products, great prices, fast shipping and a great company to do business with. Easy install, and it took longer to trim the air dam than installing the hitch.
by: 02/22/2024
2021 GMC Sierra 1500
Terrible, they sent the wrong hitch and now want me to pay shipping for the return
by: Willy Wonka05/08/2021
I have had this hitch installed for just over a year now on my '99 2-door Tahoe. The install was pretty straight forward, and the hitch itself has held up quite well through a year's worth of abuse. I use it to run my bike rack out the front; the receiver protrudes just below the factory front bumper, maximizing ground clearance when adding length to the front of the vehicle. And as you can see, the kit comes with two sets of hardware in case you want to maintain the factory tow hooks like I have.
by: Steven03/04/2018
Overall great product and fit nicely! I was able to replace the apron and license plate holder afterwards with little modification, just had to cutout for the hitch. The photo shows how I plan to use it so not much stress for the hitch but it feels extremely solid, I’m sure it would be great for winching.
by: Philip11/11/2019
This is the second front hitch I’ve ordered
Works great,looks nice on the vehicle fits tight under bumper like it came from the assembly line of my truck! I use it for my winches and moving trailers around the yard. Very easy install will take less than 20mins to install. I installed them on a 99 Chevy Tahoe and a 97 Chevy pickup. Very fast delivery from etrailer company
by: Jake01/27/2018
Chevrolet Silverado
Fits perfectly, i like that it comes with the guide wires makes it all go smooth and easy! Install was maaaybe 30minutes and super simple, using it for winch set up, it is perfect (1993 chevy 1500 silverado extended cab) no modifications needed to my truck! Definitely a cheaper solution than to buying a modified bumper for winching. Nice sturdy product.
by: Mark Levengood05/13/2017
Chevrolet
Peaches is my 95 Chevy and she loves the front hitch it helps to put the trailer right where I want
by: Jerry08/21/2020
The unit exceeded my expectations. The fit was perfect. I also greatly appreciated the extra long bolts so that I could reinstall my OEM tow hooks. Those pulling wires are ingenious !
by: Daryl H03/25/2018
1994 Chevrolet Silverado 1500
Front receiver hitch 94 Chevy 1500 4x4 only took 1/2 hr for installation no problems.
Daryl H.
3/25/2019
Great product, I used it to push snow Meyer home plow and move various trailers around.
by: Cindy09/13/2022
Although it's a front hitch, when delivered, the sticker on the hitch says "not for front installation". Nice hitch and we installed it anyway, however it sat so high on our 1995 Suburban that the bike blocked the driver's view so we weren't able to use it in the front after all
Mike L.
9/25/2022
I cant speak to the purpose of the sticker you describe. Draw-Tite confirms that this hitch is a confirmed fit for your vehicle and is indeed designed for use as a front mounted receiver hitch.
by: Greg B09/28/2023
Chevrolet
I ordered this trailer hitch, and UPS received it the same day. Delivered in 2 days and fits perfectly. 1997 Chevy k1500
by: Paul G04/04/2019
drawtite front hitch receiver that bolts directly without modification onto vehicle and works smoothly for placing wagon in its small back corner storage space in a cramped storage yard.
by: Joshua10/14/2016
1993 GMC Suburban
Etrailer as usual did an amazing job. Shipping was fast. Product was easy to install. The wires provided were a huge help with getting the bolts aligned properly. My only regret is that there isn't enough projects and money at my house to order more things from etrailer, but they are always my first click when looking. Thank you guys keep up the outstanding work.
by: Charles 03/21/2024
1997ChevroletC/K Series Pickup
part had a delay in shipping
by: Earl 03/06/2024
Simple install looks nice and hidden up there in front
by: Danny09/15/2022
It was easy to install and I amv very satisfied and would recommend this company and its products.
by: Pete Micha02/18/2020
1999 GMC Yukon
I'm truly satisfied with the font hitch for 99 GMC Yukon and I will keep shopping with etrailer
by: Thomas03/23/2020
1998 ChevroletC/K Series Pickup
Great hitch, fit my 98 Chevy K2500 like a glove. The only thing I'd change is to include 4 longer bolts for people who have tow hooks like my truck has. Had to buy longer ones.
by: Robert12/08/2023
GMC
it fit my 2000 GMC with out trouble. but did remove the wind dame
by: Erik 06/29/2023
1998 GMC Suburban
Super easy install. My 7 year old am I did it in 20 minutes with cutting the lower bumper plastic to fit. Nice to retain the factory tow hooks with supplied hardware.
by: John11/02/2020
1997ChevroletC/K Series Pickup
Excellent fit packaged well was able to leave lower engine cover on and tow hooks would purchase again
by: Gary 12/20/2023
I simply love it, it does everything I need it to do.
by: Michael 04/09/2023
Overall a very good quality build. There was only one hiccup in installing that I call an oversight on the manufacturer. The front bolt can not be simply dropped in place because the bumper brackets inside the frame rail are in the way. it's close, but the head of the bolt can't get past it. Only 2 ways around it. remove the entire bumper to be able to remove those brackets, OR do what I did and grind off a little bit on the side of the carriage bolt head to get it to slide past the bracket. what little I had to grind off isn't going to be enough to compromise any weight or load capacity rating. easy enough fix for me, but if you don't have a way to grind the head down the installation will require removing the bumper and brackets. Took about an hour from start to finish. Had to trim just a little bit of the license plate bracket, no big deal.
by: Timothy05/24/2016
1996 Chevrolet Suburban
I have used this hitch on the front of my 96 suburban for a year now. I use it for carrying beach chairs and coolers when we use the drive on beach. It was fairly easy to install to the existing frame and I was able to leave the tow hooks in place. I really like the supplied wires that allow you to fish the bolts into the areas where your hand does not fit.
by: Jimmy M07/22/2017
1998 GMC C/K Series Pickup
It fit on my 1998 k3500 GMC and it looks really good
25
113
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Which Front Hitch Receiver for 1997 Ram 2500 to Mount Detail K2 Avalanche Snow Plow
- You can use the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 31604 on your 1997 Dodge Ram 2500 with Extended Cab and long bed, which would give you the front mounted hitch receiver you need to carry the Detail K2 Avalanche Elite Snowplow for 2" Hitches - 84" Wide x 22" Tall # K2AVAL8422ELT. Additionally, you would not need any type of drop adapter for this setup.
You could also use the Detail K2 Avalanche Snowplow for 2" Hitches - 84" Wide x 22" Tall # K2AVAL8422, which
view full answer... - Recommended Snowplow for a 2024 Jeep Wrangler Unlimited
- I recommend using the Detail K2 Elite Snowplow # K2AVAL8422ELT on the front of your 2024 Jeep Wrangler Unlimited. This will attach using a Front Receiver # C31086 so you will be able to easily remove and install the plow when needed. I prefer this plow as it uses an actuator which is better than a winch style since you do not have to worry about snow and ice collecting in the cable/strap.
view full answer... - Will A Leveling Kit Be Required To Use A DK2 Elite Snowplow
- The Detail K2 Elite Snowplow for 2" Hitches # K2AVAL8422ELT doesn't require a leveling kit or list any specific heights that the front-mounted hitch needs to be at so you should be fine without one. That being said you are adding a considerable amount of tongue weight to the hitch so you could run into very little clearance between the ground and snow plow components.
This plow has a shipping weight of 334lbs so you can expect it to be close to 330lbs once all the packaging is removed
view full answer... - Replacement Option For Bent 84" Snowplow
- We may have the replacement parts you are looking for, but I would need to know the brand and model of your current snow plow to confirm the correct parts.
If there are not parts available, or if you would rather not deal with having to change them another option is to replace your current plow with a similar snowplow like the 84" wide x 22" tall Detail K2 Avalanche Elite Snowplow for 2" Hitches # K2AVAL8422ELT which can be angled 45 degrees to left and right or can be used straight
view full answer... - What Is the Required Receiver Height for the Detail K2 Avalanche Elite Snowplow
- The Detail K2 Avalanche Elite Snowplow part # K2AVAL8422ELT will work with a front mount trailer hitch that is between 9" to 18" from the ground to the bottom inside edge of the receiver tube according to Detail K2. The blade height is adjustable which is why there is such a large range.
If your front mount trailer hitch is not within this range then your only option is to use a drop front mount trailer hitch. If you can let me know the year, make, and model of the vehicle I can see
view full answer... - How Far Down Does Receiver of Draw-Tite Front Hitch for 1999 Chevy Tahoe Sit
- From where the Draw-Tite Front Mount Trailer Hitch # 65005 mounts to the frame of your 1999 Chevy Tahoe to the bottom of the receiver opening is going to measure right about 1-1/4". The receiver itself is 2" x 2" and, it has about a 1/4" thick collar around the opening, and the brackets sit about 1" lower than the top of the 2" x 2" crossbeam.
view full answer... - Front Mount Trailer Hitch Receiver for a 1994 Chevy K2500 4x4
- According to Draw-Tite, the Front Mount Receiver, # 65005, will fit your 1994 Chevy K2500 4x4. I have included a link to the installation details for you to view. For any accessories you may put in the hitch, I recommend the Trailer Hitch Receiver Lock, # e98882, to secure them in the hitch and deter theft. I have included a link to a video review of the lock for you.
view full answer... - Recommended Front Hitch, Snow Plow and Front-Axle Suspension Jounce Spring Kit for 1994 K2500 4x4
- For your 1994 Chevy K2500 4x4 the front-mount hitch I recommend is the no-drill Curt model # 31042.
This hitch offers a 500-lb vertical load rating, plenty for a snow plow like the 82-inch K2 # K2AVAL8219 or one of the others shown on the linked page.
With a heavy front-end plow load on the truck's suspension you might want to consider a suspension helper spring kit to help offset that load and reduce front sag. If your K2500 has front Stamped Lower Control Arms you can use Timbren
view full answer... - Which Front Mount Trailer Hitch for a 1999 Chevy Suburban has the Best Ground Clearance
- I have included a picture. In the picture the top drawing is the Draw-Tite hitch # 65005. You can see how the receiver sits just below the bumper (and will stick through the optional lower fascia piece, if present). The bottom installed picture is from a customer who installed the Curt hitch # 31042. It is also below the bumper but appears to hang down lower than the Draw-Tite hitch. based on this the Draw-Tite hitch is going to provide better ground clearance.
view full answer... - Will the Draw-Tite Front Hitch # 65005 fit a 1993 GMC Jimmy S-15
- Yes, I checked with Draw-Tite and they confirmed that the Draw Tite Front Hitch # 65005 that you referenced will work on your 1993 GMC Jimmy
view full answer... - Front Mount Hitch #65005 fit on 1997 Silverado Z71 4wd
- The Draw-Tite Front Mounted Trailer Hitch Receiver, part number 65005 will fit your 1997 Silverado as long as it's a 1/2 ton model with the 6 lug wheels. It will not fit the 2500 and 3500 models with the 8 lug wheels. You will most likely have to remove the fascia to install the hitch. After it's installed, the fascia can be trimmed to allow the receiver to pass through it, and re-installed.
view full answer... - Front Hitch Recommendation for a 1997 GMC Suburban Retains Tow Hooks
- The front hitch part # 65005 that you referenced has been confirmed to fit your 1997 GMC Suburban and will allow you to retain your tow hooks once installed.
view full answer... - Mounting Holes Dimensions for the Draw-Tite Front Mount Trailer Hitch Receiver # 65005
- The Draw-Tite Front Mount Trailer Hitch Receiver # 65005 has mounting hole dimensions that all measure 30-3/8" on center. The trailer hitch also measures 26" on the inside of the mounting brackets.
I have attached a photo for demonstration purposes.
view full answer... - Front Mounted Trailer Hitch Receiver Compatability With a 1995 Chevrolet K1500 Pickup
- Yes, the Draw-Tite Front Mount Trailer Hitch Receiver # 65005 is confirmed to fit on your 1995 Chevrolet K1500. It will fit your frame dimensions as the mounting holes in the receiver are 30-3/8" on center. You should have either all 6 mounting holes already in your frame or you may have to drill the rearmost 2 holes as they are not always present on all vehicles. I have linked the installation instructions below.
A Front Mount Trailer Hitch License Plate Relocation Bracket # 5443 will
view full answer... - Recommended Front Mount Hitch for a 2022 Ram 1500 w/out Tow Hooks
- I would be happy to help you. We do have a front mount hitch that fits your 2022 Ram 1500. It is the Draw-Tite Front Mount Trailer Hitch item # 65081. This is confirmed to fit the 2022 Ram 1500's without the tow hooks. If you have tow hooks this will not fit.
This front mount hitch has a 500 lbs vertical load limit which is the same thing as tongue weight.
If you have the tow hooks or your trailer's tongue weight is heavier, I recommend using the Trailer Valet XL Trailer Dolly item
view full answer... - Front Mount Trailer Hitch for a 1989 Chevy C2500 Pickup Truck
- We do have some front mount hitches that fit a 1989 Chevy C2500 pickup but # 65005 only fits the 4-wheel drive models. For a 2-wheel drive we have # 65021. It fits as long as the truck is not a crew cab model and as long as it has 8-lug wheels.
We also have Curt front hitch # 31043.
I have included links to the installation instructions for both of these hitches for you.
view full answer... - Will Draw-Tite Front Mount Hitch Receiver # 65005 Fit 1989 Blazer K-5 4WD
- The Draw-Tite Front Mount Hitch Receiver, part # 65005, will fit the full-size Chevrolet Blazer for model years 1992 through 1994. It will not fit your 1989 Blazer. There is currently no front-mount hitch receiver available for your vehicle. I confirmed this with my technical contact at Draw-Tite.
We do offer a rear hitch receiver for your 1989 Blazer, the Draw-Tite Class III 2-Inch hitch, part # 75129. This rear hitch is rated for 500-lbs tongue weight, and is also rated for use with
view full answer... - Front Hitch Recommendation for 2000 Chevy Silverado K2500 4x4
- For your 2000 Chevy Silverado K2500 4x4 the front hitch you'd want is the Draw Tite part # 65005.
For a plate to mount a winch the part # BDW20011 would also be a great solution as well.
view full answer... - Front Hitch Recommendation that Fits 2000 Chevy Silverado K2500 4WD with Tow Hooks
- The Draw Tite hitch part # 65005 is a confirmed fit for your 2000 Chevy K2500 4x4 that has tow hooks. You'd need to remove the tow hooks though to install this hitch.
For a plate to mount a winch the part # BDW20011 would also be a great solution as well.
view full answer... - Front Hitch Recommendation for a 1997 GMC Yukon
- Most likely you would need to upgrade your hitch to a 2 inch hitch like the Hitch part # 65005 because you will need the extra capacity and because you would have a hard time finding a hitch carrier designed to fit that hitch size.
The # 65005 has a capacity of 500 lbs of tongue weight. For a motorcycle carrier you could go with the Rage Carrier part # UF48-979033.
You will need to consider the fact that the motorcycle will block air flow to the radiator, block the headlights potentially
view full answer... - Recommended Front Trailer Hitch Receiver for 1999 GMC Sierra 2500 HD 4 Wheel Drive
- For your 1999 GMC 2500 HD with 4WD, I recommend the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" # 65005. This receiver is rated for 9,000 lbs line pull, vertical load of 500 lbs, and gross trailer weight of 5,000 lbs.
I also recommend the Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers # 63080 to go with this receiver. I've attached a video of this product to assist. I also recommend the Anti-Rattle Trailer Hitch Receiver Lock for 2" Trailer
view full answer... - What Front Hitch do you Recommend for my 2002 Ford E-350 Cutaway Chassis
- We have the Curt Front Mount Trailer Hitch Receiver part # 33055 and the Draw-Tite Front Mount Trailer Hitch Receiver part # 65001 that are both confirmed fits for your 2002 Ford E-350 RV Cutaway Chassis.
I have linked videos on both for you to check out. They install the same and have the same capacities. In this case choosing the more cost effective option is the way I would go.
view full answer... - Drilling Required for Front Mount Hitch on 1997 GMC Yukon
- There's only a single 1/2 inch hole that may need to be drilled in order to install the Draw-Tite front mount hitch, part # 65005.
According to Curt, their hitch for your 1997 GMC Yukon, part # 31042, does not require any drilling.
view full answer... - Does Front Air Dam Need to Be Trimmed to Install Front Mount Trailer Hitch on a 1998 GMC Yukon 4x4
- In order to install the Draw-Tite front mount trailer hitch, # 65005, the air deflector/fascia must be trimmed or removed on a 1998 GMC Yukon 4x4. I have included a link to the installation details for you. You will also need to determine if the front axle can handle the weight of a carrier and bikes.
Keep in mind that your view will be limited with something mounted to the front and air flow will be reduced.
view full answer... - Draw Tite Front Hitch that Fits 1989 GMC K2500
- We have a Draw Tite front hitch that fits your 1989 GMC K2500 with the # 65005 but there isn't a way to adapt the # 65078 to fit your truck.
view full answer...
Info for these parts were:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chevrolet C/K Series Pickup Accessories
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
2/28/2024
I am sorry for any confusion. I do see that this hitch is only designed to fit the GMC Sierra 1500 for the years 1988 - 1999. Since your vehicle is a 2021 GMC Sierra 1500, it is not a confirmed fit. I did, however, find part # DT44HR, which has the same specs as this hitch, that is a confirmed fit for your vehicle.