Mud Flaps Specs:
Features:
Durable mud flaps protect your vehicle, towed gear, and other cars on the road from rocks and debris. 1/4" Thick rubber is flexible and forgiving. Contours around your wheel wells to provide more protection for your fenders.
Tech Tip:
Mudflap will require higher mounting in the wheel well or trimming for proper ground clearance.
More Information >Mud Flaps Specs:
Features:
Durable mud flaps protect your vehicle, towed gear, and other cars on the road from rocks and debris. 1/4" Thick rubber is flexible and forgiving so it won't break if it hits something on the road.
Tech Tip:
Mudflap will require higher mounting in the wheel well or trimming for proper ground clearance.
More Information >Videos
for Mud Flaps
Help Articles
for Mud Flaps
Expert Answers
for Mud Flaps
The BulletProof Hitches Adjustable 2-Ball Mount for 2" Hitch - 6" Drop/Rise - 14,000 lbs #MD206 will work well with the Rock Tamers #ERT00108. The ball mount shank has adequate room for this application when using the…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...Bill yes, the Brass Tire Sensors for TST TPMS #TST-507-RV-S2 will work great with your TST TPMS for RVs - Color Display - Signal Booster #TST-507-RV-4-C. These sensors were designed specifically to be used with that system as well as the 6 sensor…
view full answer...Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to…
view full answer...No, it does not! The only hitch that fits a 2024 Mitsubishi Eclipse Crossover is the Draw-Tite item #DT97GR. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 525 lbs maximum tongue weight.
view full answer...Hey Ron, thanks for reaching out! The Putco Classic Chrome Decorative Pillar Posts #P402678FD are for an F-150 so we will get that updated. For your 2024 Ford F-250 Super Duty you'll want to go with the Putco Classic Chrome Decorative…
view full answer...Yes, it will! The Hellwig Adjustable Big Wig Rear Anti-Sway Bar item #HE96XR is confirmed to fit your 2024 Chevy Silverado 3500. This sway bar will minimize lateral movement in your rear end and improve stability. This sway bar is made in the USA…
view full answer...I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate…
view full answer...Since your 2023 GMC Yukon AT4 does not have the power retractable assist steps the correct mud flaps you would need for the front and back is the part #WT73XJ.
view full answer...I would be happy to help you. The overall height including the cap for the DeeZee Truck Bed Auxiliary Tank item #DZ91752X is 22-1/2 inches. It is also 9" wide. You won't have any clearance issues with your 5th wheel hitch on your…
view full answer...I prefer the Blue Ox flat towing setups over the Roadmaster kits as I have found them to be just a little easier to use and they are very well made. I wouldn't worry to much about the bumper cuts and it doesn't affect the shudder…
view full answer...Hey Jason, I spoke with Furrion and they stated that the Furrion Chill Cube is OEM only currently and should be released to the aftermarket distributors later on this year (2024), but there is no solid date. That says to me that they're…
view full answer...Filter Products (4)