Most Popular Michelin
Videos
for Michelin
Help Articles
for Michelin
Expert Answers
for Michelin
Thanks for the pictures. What you have there are the old Thule square bars. Since none of the current Thule feet are compatible with those crossbars you will need to use the Inno Feet for Square Crossbars #INSUT. The Inno bars are the same as the old…
view full answer...I attached a picture that shows what the three different styles of wiper blades look like. Beam and Frame are the most different and Hybrid is mix of the two. The #MCH8519 is the hybrid style in the middle.
view full answer...The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.
view full answer...I must recommend that you replace the hub/drum as well when changing the size of your braking assemblies because the surface area on the old drums may not line up with the new braking assemblies which is why I recommend replacing both at the same…
view full answer...The Nylon Bushing - 7/8" Inner Diameter, 1-1/8" Outer Diameter - 3" Long #TRBU13871 should do the job and press fit into the eye of your leaf spring. Then the Trailer Suspension Bolt #7-260-2 is 4-1/2" long and 7/8" in…
view full answer...The 5 on 5 or 5 on 4-1/2 you're seeing on wheels is the bolt pattern. The first number is the amount of bolt holes and the second number indicates the spacing. When you have an even number of holes you can just measure from the center of one bolt…
view full answer...When measuring for bolt pattern on an even bolt pattern you would measure from the center of one hole to the center of the hole diagonally across from it. In your picture you started measuring at the 1 inch mark. So if the adjacent measurement is…
view full answer...It looks like the passenger side cover is missing. The left and right are from the perspective of someone sitting in the vehicle facing forward. So the passenger side would be the Replacement Cover for Thule Edge Flush Rail - Right #TH33EE. The…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...For your 2019 Audi Q7 the Thule WingBar Edge roof rack part numbers #TH79FE, #TH29SC, and #TH52RE will be your best low-profile solution. The flush bar style of racks will give you the lowest clearance for your garage door, and is compatible with all…
view full answer...We do have replacement end caps for your Thule AeroBlade Edge Roof Rack TH7602-TH7602! The Replacement Endcap - Left is #TH1500052333 while the Replacement Endcap - Right is #TH1500052334. If you take a look at the accompanying photos you will be…
view full answer...The Blue Ox KarGard Towed Vehicle Protector #BX8870 does not attach to your vehicle but rather to the tow bar. You will simply disconnect your tow bar from your base plates and you will be able to drive your Focus without any other connections or…
view full answer...
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."