Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Installation Notes:
Drilling required for installation
Tech Tip:
Designed for installation with Aries rear fender flares, AA2500201 or AA2500202.
More Information >Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Installation Notes:
Drilling required for installation
Tech Tip:
Designed for installation with Aries front and rear fender flares (AA1500201 and AA2500201) or (AA1500202 and AA2500202).
More Information >Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Features:
These fender flares replace your Jeep's front and rear factory fender flares to increase coverage and provide more tire clearance. Constructed of paintable steel with black powder coat finish. Easy, bolt-on installation with included hardware.
Installation Notes:
Drilling may be required for installation
More Information >Fender Trim Specs:
Features:
Outfit your Jeep Wrangler JL or Gladiator with Aries front fender flares. Included LED lights provide extra visibility from the front and sides, and function as running lights and turn signals. Lightweight aluminum construction is rustproof.
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Installation Notes:
Drilling required for installation
Tech Tip:
Designed for installation with Aries front fender flares, AA1500201 or AA1500202.
More Information >Fender Trim Specs:
Features:
Protect your vehicle from flying debris when going off-road with these rear tube fenders. Provides high clearance for Jeeps with large tires.
Installation Notes:
Drilling required for installation
More Information >Fender Trim Specs:
Features:
Protect your vehicle from flying debris when going off-road with these front tube fenders. Provides high clearance for Jeeps with large tires. Includes turn signal lights for added safety and visibility.
Installation Notes:
Drilling required for installation
More Information >Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Fender Trim Specs:
Installation Notes:
Drilling will be required for installation if any of the holes in the product do not line up with the holes on the vehicle
More Information >Videos
for Fender Trim
Help Articles
for Fender Trim
Expert Answers
for Fender Trim
Hi Richard! It sounds like you're needing to install the Load Resistor Kit for LED Turn Signals #DI34ZR on the turn signals you've installed on your toolbox. Since LEDs don't require as much power as…
view full answer...Yes, there is! To install the Redarc Tow-Pro Elite Brake Controller item #RED63RR in your 2023 Subaru Ascent you will need the Plug-In Wiring Adapter for Electric Brake Controllers item #3062-P. The brake controller port will be underneath the dash…
view full answer...Since Valley went out of business there are no direct replacement parts that are available but a repair kit like the Curt #C25194 for 2" Curt Couplers may be compatible. What I recommend doing is replace your coupler completely as…
view full answer...We currently have not had a Ford F-150 with the power outlet in the bed to test fit a bed mounted 7-Way #C57008. I see no reason you will not be able to still install the 7-way as there is a large gap which can be seen in the installation video…
view full answer...I do have an option for you but roof rails won't work very well on a teardrop trailer, even if you were able to get the rails to conform, it's likely the accessories would bind due to the steep angles. Instead, you will need…
view full answer...I must recommend that you replace the hub/drum as well when changing the size of your braking assemblies because the surface area on the old drums may not line up with the new braking assemblies which is why I recommend replacing both at the same…
view full answer...The E-Track has slots that have a length of 2.45-inches and a width of .58 inches. See attached diagram.
view full answer...Congrats on the new trailer! You will need a sliding 5th wheel hitch. A standard fixed hitch like the Curt A20 item #C16140 won't provide you with the necessary clearance you'll need. You'll end up running the nose…
view full answer...Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…
view full answer...Looks like you have an older version of the 21007-92230 that you referenced which fits the following: 1973 - 1991 Chevrolet C/K Series Pickup 1973 - 1991 GMC C/K Series Pickup 1967 - 1983 Ford F-100, F-150, F-250, F-350 Standard Bed models 1992 -…
view full answer...The Stromberg Carlson #LA-401BA has a hinge that can be installed where the two ladder pieces join, which can help with any odd shapes on the rear of your coach. These are typically used on travel trailers but they can also be used on Class A or…
view full answer...The Single Axle Trailer Fender #HP56VR is made of 14 gauge steel and has one edge that is a 90 degree angle to weld it to your trailer and the other has a more rolled edge. The strength of the fender and ability to hold 200 lbs is based on your…
view full answer...