Hey Dave, thanks for the pictures! Based on what you have and what you are looking for the Tie Down Spare Tire Mount part #TD66FR that you referenced would be a great option. This is very similar to what you have now so it would do a great job.
Hi Frank, While we can get you a brake controller for your 2020 Chevy Colorado, there isn't a plug-in option and harness because the truck doesn't have a plug under the dash. That said, the wires are already run to the cab, so it isn't…
Hello Dale, thanks for reaching out. We do have a few options for an exterior utility/loading light. Take a look at the following: - Gustafson 12V LED RV and Utility Light - 8" Long - Black #277-000493 - Opti-Brite LED Interior Strip Light -…
Hey George. The Power Mountain Tallboy Off-Road Bottle Jack item #PM34FR is only rated for 6-tons but it's not like you're raising up the entire motorhome. Most of the weight is going to be on the back though and since it is a dually, I…
Hey Gwen! The distance from the center of the mounting hole to the bottom of the Trailer Valet JX Trailer Jack #TV35FR when fully retracted is 13.44". If you’re measuring from the bottom of the pipe mount instead of the center of the hole, that…
Hello Rhonda, thanks for reaching out. Yes, we do offer both front and rear mud flaps for the 2024 Chevy Colorado Trail Boss with fender flares. For that I recommend the following: - WeatherTech Mud Flaps - Easy-Install, No-Drill, Digital Fit - Front…
Hey Ed, yes the solenoid of the reverse lock out is going to click when it is activated. You would definitely be able to hear it too. Have you tried this already?
Hi Henry; the Power Mountain Tallboy Off-Road Bottle Jack #PM34FR you were looking at will work well for your Cybertruck. This has a 6 ton weight capacity which will be more than enough to handle your truck and a lift range of 8-1/2" to…
Hey Anthony! The outer diameter of the weld-on pipe coupling on the Trailer Valet JX Trailer Jack #TV35FR is 2.01". I went ahead and attached some dimensional drawings below for your reference. What kind of trailer do you have?
Hey Bill, thanks for reaching out! The Optronics Smoke Lens ID Light Bar #OPT55KB doesn't have Lumen or Candela ratings according to my contact at Optronics. I will say that this will be about the equivalent of a light on your vehicle. So there…
Hey Chris, in the instructions for the B and W Turnoverball gooseneck hitch part #BW73FR that you referenced it says that the inner brackets are not needed if the truck has the inner brackets for the OEM hitch already welded to the truck frame. In…
Yes The Ultra Bright LED Flood Light #3371492196 can be used as a backup light when connecting to your reverse blue wire from the 7 plug, but you need to make sure that the circuit can handle the power of the light. Each light runs 6.25 amps, since…
WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!
Illuminate Your Workspace with STKR Concepts LED Work Lights
STKR Concepts LED work lights are perfect for enthusiasts seeking bright, portable lighting solutions. These lights are easy to set up, compact for storage, and offer adjustable positioning. Ideal for both work and camping, they provide reliable illumination, though stability might require additional support in windy conditions.
STKR Concepts LED work lights are highly portable, collapsing into a compact size that fits easily into a bag. This makes them ideal for both job sites and camping trips. Their lightweight design ensures easy transport and setup, providing flexibility wherever you need bright, reliable lighting.
The battery life on STKR Concepts LED work lights is impressive, with quick charging and long-lasting performance. However, for extended use, especially on job sites, a larger rechargeable battery might be beneficial to ensure longer light hours without frequent recharges.
While STKR Concepts LED work lights are easy to set up and adjust, they may require additional support, like a sandbag, for stability in windy conditions. This ensures they remain upright and functional, providing consistent lighting even in challenging environments.
At full height, these lights provide excellent brightness at face level, though the intensity may slightly diminish. For optimal illumination on a job site, consider using a pair of lights to ensure comprehensive coverage and brightness.
STKR Concepts LED work lights make a great gift due to their versatile design, allowing for precise light positioning. Their compact size makes them easy to store and transport, while the bright LED ensures effective lighting. Perfect for anyone who needs reliable, portable illumination.
Exterior Lights
Filters
