luggage - Laptop Backpack

Hello Todd, thanks for reaching out. If you are wanting something with longer forks or "arms" as we call them, we do have a few options that will be longer than the 22" arms on your Rola rack. First, we have the Saris Glide EX #SA774.…

Hello Joseph, yes there is! What you are looking for is the Anti-Rattle Hitch Lock and Cable Lock for 2" Hitch Mounted Bike Racks #e88RV. This will work with the Benton Bike Rack #B54VR, as well as the #B94FR and #B54FR so that the bike and rack…

My best recommendation for a 4-bike tilting hanging bike rack that will fit a 2-inch hitch is the Thule Camber 4 Bike Rack - 1-1/4" and 2" Hitches - Tilting - Steel #TH9056. Apart from the maximum per-bike capacity of 37.5 pounds, the…

The JR Products Automatic Changeover 2-Stage Propane Regulator #37207-30395 should be set to give you 11" WC straight from the factory. The pressure will still be the same so there won't be an issue with the new regulator having a higher BTU…

The direct replacement for your Dutton-Lainson 203925B jack would be part #DL22560. According to Dutton-Lainson, the jack would indeed be compatible with your existing mounting plate. I've linked to a product demonstration video featuring the…

The Camco RV Awning Repair Tape #CAM42623 that you referenced is parchment white which is basically off-white.

The torsion spring you are referring to will no longer be needed when you are upgrading from a manual pull-style awning to a power awning with the Solera Manual Pull Style to Power Awning Conversion Kit #LC329250. If you take a look at the cut out of…

The Camco RV Portable Propane Campfire #CAM58041 has a built-in regulator so it can connect directly to your RV's high-pressure propane feed. My contact at CAMCO confirmed this is the preferred installation method. It comes with an 8 foot hose…

You could technically use the NOCO Genius Smart Battery Charger #329-GENIUS2D for the battery bank on your RV but I recommend using a 2-bank charger like the NOCO Genius Multi-Bank #NOC24FR instead. Reason being that sometimes more cost-effective…

Most of the Elixir motors have a D shaped shaft that the fan blade fits onto which is an outdated style. We do not have any replacement fan blades that fit the D shaped shaft of the motor and from my research they can be hard to get a hold of. One…

Thanks for the pictures! I have a couple of 6 blade, 6" long replacement fan blades but from the pictures you sent the newer ones look like they rotate the opposite direction of your current fan blades. I recommend replacing the motor as well…

The Reese hitch you have will be compatible with ISR rails like the B&W #BWRVK2505. These custom-fit brackets are designed to work with factory holes in your Sierra's frame to make the installation easier and much faster. If you plan on…