Hey Edgar, so we have pretty similar designs to the part #TP48KR in different colors that are the same size. For darker we have #TP98KR More like a light gray #TP78KR Lighter tan #TP68KR Darker brown and leather #TP32KR
Hi Lynn; this particular model of the Thomas Payne Trifold RV Loveseat and Sleeper #LC42PX only comes in the Black Granite. The 62" Rest Easy Trifold has more colors available if you're trying to match something. We have the following:…
Hey Fred! You will need to take some measurements to determine if you will have enough clearance with the B&W Gooseneck Pin Box #BW23RV. You can use the following formula: (A + B) - C = Clearance A = Distance from the gooseneck ball center to the…
Hi Jeanette; the Thomas Payne Trifold RV Loveseat and Sleeper - 80" Long #LC64FC is the only thing we have in the Canvas Back Granite color. The closest match with any kind of furniture is the Thomas Payne Dual Reclining RV Loveseat #TP98KR…
Hey Ralph! The Thomas Payne RV Jackknife Sofa w/ Hinges, Hardware #TP76KR requires at least 3" of wall clearance to function properly. Are you upgrading your sofa or did the old one wear out?
Hey Jeff! Yes, the Thomas Payne Seismic Right Arm #TP62AR, Left Arm #TP65AR, and Armless RV Recliner #TP63AR will all connect. Together they will form a complete couch. Just make sure you have 82-1/2" for this to fit in your 2023 Grand Design…
Hey Frank. I checked our specs and with Lippert and the Thomas Payne Seismic Power Loveseat w/ Console item #TP65KR requires a 26" wide entryway. This couch comes in three separate pieces but the seats still measure 27.5" wide x 38"…
Hey Nicholas, the front to back depth of the sleeping surface of the Thomas Payne Sleeper Sofa part #LC94FC that you referenced is 70 inches. Is that big enough?
Hello Chris, Thanks for reaching out. I completely understand wanting to confirm this before installing, especially with tight aisles and wall clearance. When the Thomas Payne RV Jackknife Sofa #TP58KR is upright, it measures 30" deep, including…
Hi Kelli, thanks for reaching out. Yes, we offer several Thomas Payne RV recliners that are designed for RV use. The highest weight capacity we have for these recliners is 300 lbs on the Heritage models like #TP52AR and Signature Swivel Glider models…
Hi Mark; according to Lippert the Thomas Payne RV Jackknife Sofa #TP86KR is a "wall hugger." This means it can sit right up against the wall in the upright position. You don't need a certain amount of space behind it.
Definately I will order from here again if I need anything. Not only was the service fantasic, the price was over welmed dirt cheap compared to so many others on the internet. The order was very professionally packaged and delv'd. I love this place. Definately I will be a returning customer.
James
Cedar Rapids, IA
RV Couches and Chairs for cozy upgrades
Enjoy recliners with heat and massage, modular seating with center consoles, and full-size cup holders that make camp time comfortable. Choose from jackknife sofas that sit on an existing base or include a leg kit, and double-check wall clearance needs for your layout. Installation and assembly can be easy, but these pieces have some weight, so a helper makes moving them safer.
Plan on two people and a moving pad—these pieces have some weight even disassembled. Locate the power supply zip tied under the seat and plug the AC adapter into the receptacle at the back lower corner or in the back of the armrest section. Remove the locking clip on the adapter before seating the plug. If equipped, connect the two cables between the back and seat for headrest and lumbar.
Yes, they can be bolted down. Confirm there are mounting points in the frame and match them to your platform or floor structure. If replacing peeling furniture on a raised platform, reuse the platform if it's solid and square, or plan new anchors. Dry-fit first to verify recline or bed function clears walls and cabinetry.
Yes, many do. Check the product's stated wall clearance before ordering. We've seen dual reclining loveseats that need 2 inches to fully recline and jackknife sofas that need at least 3 inches to function properly. Measure from the back of the furniture to the wall and confirm your slide depth if installed on a slide.
It can, depending on the design. Some jackknife sofas are made to sit on an existing base/legs and have no legs included. Others include a leg kit or a matching kickboard. Lift your current sofa to see if it's on a separate base behind a kickboard; if so, choose a version that includes legs or a kickboard to replace the whole assembly.
Filters
