Fuel Transfer Tank - DeeZee

Hey William, thank you so much for all of the information! To replace your axles, I recommend the Trailer Axle w/ Electric Brakes item #e73SR. This is a 6,000 lbs axle that come ready to install with pre-greased hubs and electric brake assemblies.…

Hi John! The etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches - Vinyl Coated Steel #e99007 could be used with weight distribution, but I don't think it's the one I would go for. It works really well for things like bike racks, cargo…

Hey Dustin, welcome back! The Timbren SES #TFRSDJ will offer you more support over the severe service kit #TFRTT350J. Are you experiencing squat with your current Timbrens? If you are then it would be worth upgrading. If you really aren't, then…

Hey Dan, the B and W Continuum is a really great weight distribution system that will work great for your 2025MTX - T 24. The one you would need is the part #BW53FR since you have an underslung coupler. I know this is one of the more expensive weight…

Yes we do, the correct oil seal you would need is the part #10-56 which I verified has same dimensions as the 295924 that you have now.

Hi John! That is a very good question. You didn't mention if you are using weight distribution or not, but if you are and the Firestone #F2250 air bags you got have too much air pressure in them, it will take the pressure off the spring bars on…

Hello Rodney. Usually when an axle bends like that it is the result of an impact. It is pretty typical for trailer manufacturers to use axles that are slightly underrated for the trailer. The reasoning behind this is that generally 10%-15% of the…

The Connector Kit for DeeZee Truck Bed Auxiliary Tank #DZ97960 that you referenced does have a gravity feed to transfer diesel fuel from your auxiliary tank to your OEM tank but there is no automatic shutoff. The kit includes a fitting with a…

Hey Jacob, the drain plug of the UWS Matte Black 75-Gallon Steel-Aluminum Combo Transfer Tank #UWS39XR that you referenced is a 3/8 inch diameter bolt.

The fuel line that comes with the Connector Kit #DZ97960 that you referenced is 5/16 inch and the fitting that you referenced that threads into a fuel tank like the part #DZ91752X is 5/8 of an inch. I confirmed this with my contact at DeeZee.

For the 2019 Ford F-350 with the factory puck system, the correct B&W Companion OEM Slider 5th Wheel Hitch is the part #BWRVK3370. With the hitch mounted, the rear of the base will sit exactly 8-11/32" back from the front pucks up towards…

Hey Lance, That does sound excessive, but the B&W Continuum #BW28FR is a bit of a different animal when it comes to how it operates so I do recommend sticking to the rules laid out by B&W. It wouldn't be a bad idea to have a grease gun…