Set up your waterfront with Taylor Made gear that's easy to use and built to last. Floats mount with 3/8" lag screws and washers, and you can paint them with marine grade paint, though long-term peel resistance isn't guaranteed. Steps feel sturdy, the accessory hand rail is sturdy, and dock boxes are solid, can be secured with your own hardware, and stand up to weather.
Yes, they can be painted. Longevity depends on the paint and the conditions the float is kept in. A good quality marine grade paint is the best option, but there is no guarantee the paint will not peel over time. Prep the surface per the paint maker's directions for the best result.
They are designed to sit on the dock and do not include a mounting kit. If you want them secured, supply your own hardware to bolt them down. Inspect the box before use; check the lid and bottom for any holes and repair as needed. If you add a lock, choose one that fits your hasp and protects the shackle from easy access.
Match the step height to your platform so guests can step with ease. Some steps include storage inside, which helps keep cleaning supplies and a hose handy. An accessory hand rail is sturdy. Check the non-slip surface after installation; if you see it loose or curling at the edges, resecure or replace it to maintain traction.
Start by determining the total weight of your dock and use each float's listed lifting capacity to calculate quantity. Space the floats evenly along the underside so the dock sits level. Place additional floats where loads concentrate. Verify the capacity spec on the specific floats you choose to avoid under-supporting the structure.
Use 3/8" diameter lag screws and washers. For a 48" x 24" x 12" float, 3/8" x 3" lag screws with 3/8" and 5/8" washers were used, with galvanized hardware recommended. Stainless steel hardware is also recommended for corrosion resistance. Drill holes in the boards and use the mounting slots. If you notice a slight taper in mounting locations, adjust your fit as you install.