Filter Products
Filter Results
$36.90 - $107.67
$48.37 - $52.66
Filter by Type of Binder
$36.90 - $107.67
$48.37 - $52.66
Videos
for Chain Binders
Help Articles
for Chain Binders
Expert Answers
for Chain Binders
That's a good question, because working load limits (WLL) can be somewhat confusing, but I can explain it for you. The 9,200 lb WLL of the Titan Chain Ratcheting Load Binder for 3/8" - 1/2" Thick Chain #TCRB10…
view full answer...While drilling holes in any hitch plate like the Buyers #3371809060A will affect its integrity, I believe I have a solution for you. We do have the Hitch Plate #3371809030B which already has the holes for a Pintle #33710057 which also has a…
view full answer...Yes. You can make connections to the battery on your 2020 Tesla Model Y in the same manner that you would on a standard, non-EV. You will need to start with a 4 way like the Tekonsha ZCI Kit #119250KIT which offers you a solution that…
view full answer...Yes, you could attach the Durabilt Ratchet Chain Binder w/ T-Handle and Chain for 5/16" to 3/8" Chains #DU42MR could be used to attach to cargo and through a d-ring to itself. Since the clevis doesn't come with a…
view full answer...The gauge used with the heavy duty Air Lift compressor system, #AL25854, has 4 wires because the switch is built into the gauge. The black wire is the ground, white is the signal to the compressor, red and green are ignition power wires. I have…
view full answer...I looked up the trailer connector wiring diagram for a 2007 Ford F-250 which should be the same as a Ford F-350 and found the 7-way trailer connector to contain the following wires: Orange = 12 Volt Power White = Ground Black/Green = Reverse Blue =…
view full answer...Hey Tarek, for your 2023 Ford Raptor I recommend checking out the Timbren Suspension Enhancement System #T75MR. This suspension enhancement system has a load leveling capacity of 3,000 lbs, will increase stability while reducing sag, and will…
view full answer...The Durabilt Ratchet Chain Binder #DU32MR will close up 8" from 28-1/2" overall length to 20-1/2" overall length. It is designed to fit chains with 5/16" to 3/8" thick links.
view full answer...We definitely have some trailer jacks you can use as a replacement for your Dutton-Lainson but it doesn't look like anything we have will work as a direct replacement. If you'd like to stick with the Dutton-Lainson brand then I…
view full answer...The correct replacement module for the 694654 that you have now is the part #LC85ED.
view full answer...It sounds like there is a short circuit that is overloading the running light circuit in the tow package wiring on your tow vehicle. The most likely culprit is a dirty or corroded trailer connector on the vehicle or trailer if not both. The first…
view full answer...Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have…
view full answer...