Camping Tools - Peg Pullers

Hey William, What is the year of your Ford E-350? There might be a naked roof fit kit that can fit. If not you would need to go with the Rhino-Rack RTC-Style Roof Rack Tracks - 55" Long #RTC14 and rivet it to the roof. If needed you can cut the…

Hey Lynn, I recommend using the MB Sturgis Sturgi-Stay T-Fitting w Hose #103615 which will allow you to connect your 20 lb tank to a 100 lb tank. The red type 1 ACME fitting will connect to one of your tanks, and the pigtail from the tank will…

As long as you can fit the 2" wide Yakima 60" HD Tracks #Y74MR so you have no less than 1/8" overhanging the outside of your truck bed side (see attached) you're good to go. This then allows you to use 2 sets of the Landing Pad 26…

While some people install a third crossbar for extra weight distribution or support for extra large items, it doesn't increase weight capacity. You will have three points of support with 165 lbs capacity, but it doesn't add to it. The ONLY…

You can use an anti-rattle device such as #SHP2082 as long as the shank on the bike rack is hollow. If it is not hollow then use anti-rattle device #MPG908. I have included a link to a video review of device #MPG908 for you. It is also possible that…

I measured the mounting bracket on the Rhino-Rack Shovel Holder #RR43218 to get you the hole spacing dimension you need. The center-to-center spacing between the two mounting screws is 1-3/8-inches. The width of the bracket is 2-3/8-inches. Both…

We do have a few options for replacement WD shanks that have a distance shorter than 8 inches from the center of the hitch pin hole to the center of the adjustment holes. The Convert-A-Ball Cushioned Weight Distribution Shank #AMAC1 fits 2 inch hitch…

The RV Propane Gas Detector part #RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a…

Hi Bill; assuming you followed all of the installation steps for the #DT26PR the underbody panels will fit back on your vehicle. Sometimes it takes a little finagling to get things lined back up and in place after installing the hitch so I would play…

We have the Replacement Cam Lock Cylinder for RVs - Keyed Alike Option - Stainless Steel - 1-3/8" Long #295-000005 which can be keyed alike in whatever quantity you need, but I don't have the lock cylinder to match the key number you gave to…

Hello David. I double checked with Hellwig and they confirmed that the Hellwig 7772 Sway bar part #HE54FR will indeed fit the 2023 and 2024 Sprinter 2500 with AWD.

The Glacier Cable Tire Chains, part #PW1046, are confirmed to fit the 225/60-18 sized tires on your 2018 Subaru Outback. With an 18 inch rim you definitely want the #TCMA2 adjusters even though the size range for the #TCMA1 says they'll fit.…