What our customers are saying:
Fast Shipping They are AOK Thanks
John
Lynchburg, VA
Videos
for Catalytic Converters
Help Articles
Expert Answers
For your 1996 Chrysler Intrepid we have the Drivers Side Front #MF50205 and Passenger Side Front #MF50204 direct fit catalytic converters. These will fit both the 3.3L and 3.5L engines. We do also have the Rear Converter #MF23286 for the 3.3L and…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
To flat tow your 2010 Chevy Silverado 1500 you will need to first start with a base plate kit. For that the most popular option is the Roadmaster #3154-3. In addition to the base plates, you will also need a compatible tow bar, safety cables,…
For a direct fit catalytic converter for a 1994 Ford F-350 with a 7.5 liter engine, you would need to use #MF55300. This converter was designed as a direct replacement for the factory converter on the truck. For a universal fit, there are 3 options…
For the most part the Curt #13268 and the Draw-Tite #75671 and #76116 are going to be the same hitch; they're all square tube designs and provide you with a 2" receiver. I generally prefer Curt hitches when available since…
Both part numbers you referenced are confirmed catalytic converters for your 2003 Toyota Corolla. The difference is that the part #MF49461 is a higher grade converter. It is part of the OEM Grade line of converters from Magnaflow. OEM Grade…
Our very popular Swagman XTC2 part #S64670 will fit and clear the rear spare of a 2006 Honda CR-V. If you check out the video link I attached you can see that it fits and works well.
You can confirm compatibility of the Swagman XTC-2 Bike Rack #S64670 with the rear-mounted spare tire on your 2006 Honda CR-V by taking one easy measurement from the hitch pin hole on your hitch to the rear-most edge of the spare tire. The linked…
Since you already have a factory 4-way flat on your 1996 Ford F-350 you will need the Adapter 4-Pole to 7-Pole #37185. This will plug into your factory 4-way and the rest of the wiring will have to be spliced into your factory wiring as I do not…
The Backing Plate for Tandem Axle Trailer Fender #HP82FR you mention is the correct backing plate for both the Tandem Axle Teardrop Trailer Fenders - Rounded Edges #HP94VR and the Tandem Axle Teardrop Trailer Fenders for Enclosed Trailers #HP44VR.
You will want the Tandem Axle Teardrop Trailer Fenders #HP44VR for your trailer. These fenders are 66" long, 9" wide and designed for 14" and 15" wheels. These will give you the necessary clearance…
The Tuson DirecLink Base Model Trailer Brake Controller part #335DL-100 and Tuson DirecLink Lite Trailer Brake Controller part #335DL-50 are both great brake controller options. The best option for you will be dependent on where you will be doing…
