Most Popular 3500 lbs for Toyota FJ Cruiser

Be warned! I would not buy from Etrailer ever again. We received our order and Etrailer failed to send the entire trailer axle kit. They did not include one spindle in the kit, rendering our order useless without ordering an additional spindle. Because more than 30 days had elapsed before reporting the issue, Etrailer refused to send the spindle, in addition to insinuating that I was deceiving them. This must be how they increase their revenues…don’t send the entire order, and if the customer does not catch it within 30 days, the customer loses and Etrailer makes more money. Absolutely horrible customer service from the company who failed to fulfill their end of the contract while accusing me of being deceptive. One star is far too generous for Etrailer and their scams.

Very pleased with the design and heavy duty construction of these axles. Used them to build an off-road trailer and they performed flawlessly throughout many challenging trails and off road situations. My only complaint is that the ez-lube hub design does not take grease very easily. I've had to disassemble the hubs to properly grease both bearings due to the inadequate amount of grease flowing into the bearings.

No totally satisfied with the service I received since I wasn’t communicated on the logistic timing of sending the product out until four days after buying the products. I had to call several times to know what was goong on.. More comunication is needed.

These axles were a perfect retrofit for a vintage tralier rebuild/mod. Service at etrailer was excellent. The parts were easy to fit with a little care. I would recommend this product and this supplier to anyone looking for trailer parts.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

These axles work great. I replaced three axles on my trailer last fall (2022) with these axles. I was able to install the new axles and springs in about 3 hours because everything matched up very nicely - thanks to the help of the folks at etrailer.

Click to Enlarge

Click to Enlarge

I installed the Dexter axle on my trailer yesterday, and I was very impressed with the quality and the ease of installation. The install took much less time than expected, and this was helped by the hubs having the bearing pre-installed, what a bonus! This is a great solution to replace a fried axle, I highly recommend it.

The trailer rides great down the road and no more worries about saltwater and rusty leaf springs. Not a cheap option but I’m very happy with the setup. When installing, just be sure to measure accurately and have sharp drill bits. A drill press type of guide also helps ensure correct drilling angles. The first picture is of a mounting gusset a local welding shop made. One is needed for each side and necessary to provide needed mounting strength-at least on my trailer frame. Pics 2 and 3 show the mounted suspension on one side of the trailer. Pic 4 shows the suspension on one side of the trailer with the axle attached and a separately purchased disc brake assembly mounted on it. Finally, pic 5 shows a 2” box channel between both suspension assemblies. Independent suspensions would have been nice, but I wanted to ensure trailer rigidity was maintained. So, after one year, so far, so good. It’s all smooth sailing down the highway.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

We use Timbren's ASR3500S06 on all of our XER trailers. We couldn't be happier. It is a well built suspension.

Click to Enlarge

I was looking for a low profile axle system for my motorcycle trailer. The primary requirement was to be able to load my motorcycle by myself which required a low-profile trailer. With the 4" drop provided by Timbren, this setup turned out great. I originally intended on using ramps but after I swapped the leaf spring axle out with the Timbren, I found I was able to ride my motorcycle on/off without the need for the ramps. Originally, I was going to go axle-less but I found when torquing down the assembly to my frame it started to compress the aluminum rail. To take the pressure off the frame I added the 2" bar from axle to axle. Pulls smooth and effortlessly. I've had several people comment on the trailer height with one wanting to buy the trailer from me. This person worked at the local Honda Dealership. He thought it was a great design and I would imagine he's seen a variety of trailers come through his lot. The other option I considered was a torsion axle but I was looking for the lowest profile I could get. Therefore, cost was not a key factor. I also like the soft ride the Timbren system provides. Not sure if the torsion design would have been as smooth over bumpy roads. Regardless, I'm pleased with how this project came out.

Click to Enlarge

Great products,prices and people! Awesome experience!

How quickly I received the order was great.

Trailer suspension and disk brake performance is outstanding big big difference over leaf spring and electric drum brakes. Installation required modifications to the frame to monut the timbren suspension

Click to Enlarge

Timbren saved our RV road trip! The leafs on the axle on our 2018 Jayco TT came apart while driving in Maryland. We tried going to the manufacturer, but they were useless. Going to a RV mechanic meant being grounded for at least 2 months. Then we found Timbren. With the help of Timbren's excellent staff we purchased axle-less system through etrailer, who made sure we got as quick as possible. It came ahead of schedule, my husband installed the Timbren system and we were back on the road! The axle-less system is better than the original manufacturers. If you plan on taking your RV or TT farther than 100 miles GET THIS INSTALLED and get it through etrailer.

Click to Enlarge

I have had this axle on my trailer for a year now and could not be happier with it. Customer service was great dealing with them. I would highly recommend getting items for your trailer from here.

Mission accompolished just a few minutes ago. The attached (3) images attached tell the story. Any customer relocating spring seats should measure closely before welding new seats in place to fit their trailer needs. Again your technical assistance and quick order leave me a very very satisfied customer.. [Thumbs up]

Click to Enlarge

Click to Enlarge

Click to Enlarge

I purchased the 3500 lb. set w/4" drop. Wish they made a 2" drop. Install was fairly easy, but most of your time will be consumed with alignment measurements, acquiring shims, and making adjustments. I was lucky to have a very square trailer frame. However, the "slop" in the all of the mounting bolts (especially, the spindle mounts) is more than the 1/8" window they specify. You will want to preload all bolts before tightening, and then measure for alignment/toe-in. The units are supposed to have camber built-in, but it's not near enough (more shims). Also, this suspension has more travel then the documents indicated. I had to re-mount my fenders 1" higher to keep the tires front hitting. When fully loaded, you might have 1" of travel left. All that being said, the ride is better than I anticipated. It's less bouncy than a torsion axle, and very quiet. If I was building a trailer from scratch, I would use this system, again.

Very nice quality, I had to call Timbren with a question very good company to deal with and etrailer is a first class company very good customer service.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Axle arrived in perfect condition, was also an exact fit for my Top Hat Trailer. Your staff was of great help finding my right axle. I would recommend etrailer to everyone.

Click to Enlarge

Click to Enlarge

Part was a great fit & delivery was on time and properly packaged. Definitely recommend & I will use this company if future trailer parts are needed.

Fast service from etrailer sending me my Timbren kit. They are always very helpful. Unfortunately it looks like UPS mishandled one of the 3 boxes and had to re-tape it all over. I just rcv'd the shipment, so I will have to open the box when I get home and make sure everything is inside. This is no fault of etrailer, just the shipping companies these days.

revolutionary. i will never go back to a standard axle ever again. great ride and performance regardless of loading. no need for separate shocks is a real game changer too.

I replaced the noodley Lippert axles that bent on my utility trailer. Much better. They also have the proper bend in them for the load compensation. I took the part number off the Lippert axle, and etrailer was able to cross reference the part numbers for perfect fit.

Exactly like the original

Click to Enlarge

Click to Enlarge

I ordered 2 axles snd 2 fenders on Wednesday and parts arrived on Friday at noon. Estimated ETA was 5 days. Parts were shipped same day i ordered. Parts arrived in perfect condition. I am very impressed with the super fast service, as well as being kept informed of every step. This was my first purchase from etrailer but I will definitely use them again for all my trailer needs. My only gripe, which was my fault, is in only ordered 1 Ubolt kit but I ordered 2 axles. It stands to reason if I orderedc1 ubolt kit and 2 axles it may have been an oversight on my part and a phone call or email to check if I needed 2 ubolt kits would have been nice. I highly recommend them.

Joann was very knowledgeable and very helpful.. my trailer axle and parts arrived on time and everything was in order..it doesn’t get any easier..