Best Toyota Camry Trailer Suspension Parts

I bought these as spare hardware to keep with my trailer. They appear to be manufactured well and will be a direct replacement if I have a failure while transporting.

Delivery was faster than expected and well package in the follow up was great. Thank you, E trailer same great service as before your eternal customer.

The parts in the U-Bolt kits (I had two of them) fit perfectly, and I am very pleased with everything about them.

The ladies at etrailer are awesome! Unbolts work on the new leaf springs , they know there products. I will buy from them for all my projects! Thank you

Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!

I will be disassembling and do a further visual coming up. But what I did see while on the trip is that it definitely looks as the rollers (gold colored like a grade 5 - 8 bolt, I'm assuming they are hardened) that are in the system to roll on the slipper springs are showing wear.

The fit was perfect, no issues whatsoever.

Disappointed they did not come with lock washers.

I have received significant support from e-trailer over the past 10 days as I have made several purchases for a new axle, springs, and hangars for my utility trailer. William and others have went out of their way to assist. I have been very satisfied with all products received. I will post another review when the trailer is completed.

Good kit with the necessary parts to replace leaf spring suspension. I welded the hangers rather than bolting them. The parts are not coated for the price point so you will need to paint them or they will rust immediately.

these work to replace the plastic bushings in the leaf springs. nothing fancy, they work as they should, easy to install.

Correct part to replace the junk/garbage plastic bushings from factory that wear out in about 4 miles. Use with wet bolts, great upgrade

Direct replacement. Goods quality

I Waited Too Long to Replace Trailer Bushings -The past few years I would hear “clunking” sound (different than “squeaking”) from my boat trailer, but I got concerned this year as it seemed louder. -With the boat off the trailer I could see wear around the shackle bolts -I called eTrailer to order the parts and was helped by Kayla to order the bushings/shackles/bolts/nuts for my tandem axle trailer -After trying to press the bushings in I realized I measured poorly and had two different bushings, the equalizer had 1 size and springs had a different size. -Amanda helped me get the second set of bushings (delaying the project for 5 days…but my fault) Right or wrong: -I applied anti-seize compound to the shackle bolt threads -I pre-loaded the “wet” bolts with marine grease to fill them up before inserting them into the suspension, adding grease when everything is installed -I tightened the bolts very securely and they backed off the nut ½ turn to allow for suspension movement Lessons learned: -Look for different size bushings in equalizer/springs and measure correctly ID & OD precisely -It takes some time to do this job (about 4 working hours per side) so try to do it when you are not under pressure -If you want the re-paint some parts, allow for primer and top coat drying time, i.e. overnight which adds time to the project, but it comes out better -Have a big breaker bar & extension/enforcer to help get the nuts on & off. My ½” impact gun could not tighten them all the way -A large “C” clamp will press the bushing in smooth & straight instead of using a hammer & block of wood “caveman style” -Annually inspect your trailer suspension for signs of wear and listen for increased noise Thanks again to Kayla, Amanda and eTrailer for help with this project.

I'm working on a 12 ft long 1957 Corvette trailer. Easy install, and perfect fit. I dropped the axle to gain 3".

Rebuilding the leaf springs on my 1975 Hale 2 horse straight load. These U-bolts were what I needed. Very happy.

Easy to install about 10 min start to finish. About 45 min to replace 4 thanks E trailer.

Just what I needed!

Worked great for a 3500# dual axle Stealth Apache snowmobile trailer. Informative dimensions in product description. Removed the included plastic bushings and installed MR46ZR MORryde upgrade kit.

Product seems to be of good quality. It's been one year with no problems.

Perfect component for my 2000# undercarriage project. Very sturdy and fit as advertised.

My 6' x 10' landscape trailer was a homemade by a prior owner. While it was mostly constructed very well, the spring hangers were not correct. The spacing for the springs was also wrong, and it had very little fender clearance. There was also evidence that the spring U-bolts had contacted the frame on occasion. (I do not carry loads anywhere near the 3500# axle rating.) I added an extra set of holes on the front hangers in case the ride height proved to be too much, but I like the way it sits with the stock holes. I don't think I'll be utilizing the extra holes. This kit was just the ticket to increase the suspension travel and fender clearance on my landscape trailer. Now it "sits right"!

Some of the pieces in this kit are of questionable quality. In particular, the threaded center of the nuts are not round, and will not thread on to the bolt. The kit comes with 14 of these nuts, and 7 of them are unusable. This is unforgivable, considering the issue has been reported at least since 2023, as there is a review and accompanying photo on 05/16/2023. So if you buy this kit assuming the problem has been corrected, you will be mistaken. Other than this issue, the kit seems to be acceptable.

great construction, but the screw to connect to the trailer was not long enough.

Arrived well packed and as advertised. I'm going to pull the azle out of the boat trailer and wanted to have this 'on hand' should I break some of my U bolts. I've bought from you before - always been happy, thanks

Awesome product so far, drove 4,581 miles from FL to CO, UT, AZ, NM and back to FL no issues. With Max mobility.

Wasn't exactly what I ordered but it worked.

great deal

New suspension parts made a real difference in trailer handling. Original shackles holes were severely elongated, spring eye mounts were also needing attention. Thank you, etrailer for the needed parts and support.

These parts were a perfect replacement for my old rusted u bolts. I would recommend buying flat and lock washers to place on the u bolts under the nuts due to the holes in the plates being big enough that the nuts get a little torn up when you tighten them, also the nuts it came with aren't lock nuts.

Easy to install that right the first time, my little trailer is pretty old and it is in very good shape now thanks for your help on the phone helping me order the right parts

Received my products exactly as ordered in a very timely manner. Quick changeover of axles as everything fit perfectly. There was very minor shipping damage that was easy to fix with a new grease fitting. Thank you.

Excellent, had everything I needed and more for my trailer. Everything fit well!

I bought a axle, springs wheels, hubs etc. to build a utility trailer, I inadvertently had ordered incompatible hubs for the selected axle the person filling the order noticed this and contacted customer service to alert them of the issue who then called me to correct the problem. This saved me the time and expense of returning the part and delaying the project. great service, attentive, knowledgeable employees and great products. Thanks E trailer.

As good a nylon bushings can be.

Fast shipping for regular mail and right product. I say a review from another purchaser that said to get these with the 2” X 10” and an 1/8 swan equalizers, good thing I ordered these also. After 25 yrs and about 2000 cords of firewood I rebuilt my Western Dump, everything fit perfectly. Thank You! Pictures-Worn out parts and new installed

worked great. perfect replacement for my load trail 7 k tandem axel. I paired this up with a new 2 inch bracket and bushings.

Grease fittings are press fit in not threaded grease fitting pulled out on second time greasing it wish it said this in the description I wouldn’t have bought it… junk

Need to be stronger as do the axels. Despite being under the max load for the Malone mega sport and not traveling at over 60 mph when towing I have now had 2 1500lb axels and this is the 3rd set of hanger brackets as they crack on the sides and the axels bend partly die to poor conditions of the roads but also due to under engineered for the job and weight intended. Apart from the the mega Malone megasoort has held up. Suggest a better design for the mega sport as it’s intended for outfitters not occasional use.

Work as spected