Most Popular 20000 lbs GTW for Nissan Titan

I have towed with the Curt A20 for a few thousand miles. I really like this hitch. The visual hooked versus unkooked indicator is awesome. It operates flawlessly. I do get some chucking over bridge expansion joints. However, it seems like most people have this problem. On normal roads it pulls great.

Click to Enlarge

Hitch slid into existing rails after a very minor adjustment. Took my son and I about 25 minutes to assemble, torgue bolts and adjust rails in the bed of my truck. we have used it twice already and camper did not bang and pop like it did on old worn out receiver. The ordering process was also very smooth. Kelsey took the time to explain the differences in the hitches before I made my decision! I Would recommend both etrailer and this hitch if you are looking to change out!

Click to Enlarge

Click to Enlarge

We have the Anderson Hitch installed on our 2017 Ford SuperDuty and pull a Reflection 337RLS. We have traveled over 4,000 miles and have been extremely satisfied. The hitch allows plenty of clearance between 5th wheel, bed, and the truck cab. Hook-up and disconnect has always been easy, even with RV lots that were uneven dirt lots. I use Curt thin rubber sound dampeners (item 16900) and this provides a quiet, tight fit between the rails and hitch. Of course the light weight makes it easy to remove when not towing and less weight when you are towing. A great product for the right truck, trailer combination.

Click to Enlarge

After receiving the kit i saw another one on the shelf at a local store. I noticed the one on the shelf had a steel ball cup mounted to it. Mine did not have that part. I called andersen and asked if the ball cup was available for purchase seperately. They told me no need to purchase bevause they will ship me one for free! Later on, i towed my trailer to a camp site and upon arrival i could not get the release pin to open to drop the trailer while we stayed in it. I called andersen and described the problem i had, they shipped a whole new block and cable assembly for free!! I am ver pleased with the product and also impressed with the level of customer service!

Click to Enlarge

This product review is for a Curt A20 fifth wheel hitch for a 2017 Nissan Titan XD with the puck system. The hitch was ordered in late March and received May 10, the status of my order was followed up by Helen M. at etrailer, she was very informative and responsive to my inquiries. The hitch arrived by UPS in two packages. The packaging was in great shape and very substantial. All parts were secure in the package. Be advised this hitch is very heavy so help with installation may be necessary. The hitch base frame is cast iron and very sturdy. The base fit perfectly in the factory puck system. Grease was applied to the pucks and receivers to reduce future corrosion. Unpacking will take about 30 minutes and the installation is very easy and with help will require about one hour. The hitch is installed but at present has not been used and tested under a load, so be advised there will be a follow up to this review in the future. Thanks etrailer for a great shopping experience.

Click to Enlarge

This is one of the best built hitches I’ve owned. Very well built and easily installed

So far, so good. Easy to install in the Titan XD with gooseneck prep kit. I’ll let everyone know how it hooks up and pulls, but I expect no issues.

Received an E-mail 5 days ago saying it was still on back order and would be notified when they received them and were shipped. Received E-mail yesterday that I had received my order. Found the boxes on front porch. Some rips in the boxes, but no damage to the hitch. UPS may be unhappy since I wasn't home and he had to carry it up a flight of stairs. Hitch is much heavier than my B & W. Took about 5 minutes to assemble and install in Nissan Titan XD with pucks. Too much ice and snow to use yet. Removed it from truck in about a minute. Way faster than my B & W turnover. I'll update review after I tow with the hitch.

Great Hitch, very happy with this unit. Have pulled the 18K lb fifth wheel over 25K miles (Florida to Idaho, back to Florida and now Alaska). We have covered many rough roads and challenging situations, without problems and have never had a bad couple. The hitch indicator on front of head gives a clear indication of latching condition, and the latch handle has a locking pin for added protection. This pin is the only issue I have had, which can be trapped under the slide plate if your truck is at an angle (beyond about 35 deg) from the rv. I make it a point to pull this pin prior to backing if I am the least bit concerned. This is a great hitch! Excellent quality and it's made here in America.

Click to Enlarge

This is very well built and operates great. Once I got the first rail positioned and mounted, everything else was very easy. The R20 slider came in a single box and was very heavy. The packaging is not suitable for the weight. As others have also reported, the package was completely demolished when it arrived. Thankfully , all the part’s made it okay and nothing was damaged. I love the product.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Tried to install this on a 2001 Chevy Silverado 3500, dual rear wheel, long bed, 4x4, diesel engine truck. The clamp style mounting simply does not work. The ONLY way I can see this working is by drilling added holes in the frame of the truck at the front end of the side plates. This is because of a bend in the frame at the clamp location. Also at this location the frame is boxed in and any bolt holes will be hidden. Bolts would have to fished in with bolt wires.

Click to Enlarge

I am very pleased with my purchase of the Reese M5, a major improvement over my old receiver. Great service from etrailer as well.

6000 miles towing this year; loaded trailer weight 16,480 lbs (based on CAT scale weight tickets). Hitch is awesome. Very secure with no noticeable chucking. I can remove and install this hitch by myself. The two pieces are very manageable. My fifth B&W hitch over the years; 2 turnover ball goosenecks and 2 tow & stows. Quality hitches which I recommend highly.

Click to Enlarge

Very happy with the B&W hitch we received. etrailer and their staff were excellent to work with. Shipping was sooner than projected. And the installation was extremely easy. Would absolutely use etrailer again as well as B&W products. Thank you all!

Click to Enlarge

Click to Enlarge

Click to Enlarge

my companion 5th wheel hitch(rvk3370) hitch was delivered on 3/11, I installed it in a couple hours on 3/12. It was a piece of cake, the delivery was made with a lift gate truck that I back my truck up to and had the driver lower the lift gate down onto my tailgate, I unpackaged the hitch and was able to Maneuver it by myself into the puck system on my truck, I have the slider hitch so much heavier than the standard one, but still very easy for my 65 year old body to handle, the B t W was the only hitch I considered because of the ruggedness and quality of their products my truck is a 2023 Ford F 350

Click to Enlarge

Will at eTrailer.com did a great job walking me through the 5th wheel hitch and air lift options that I needed. The B&W Companion Slider Hitch installed like a charm, and looks to be great quality! Nice fit and finish, B&W.

Click to Enlarge

I wanted to be able to easily utilize my truck bed and this hitch provides that in spades! Easy to remove and install. I absolutely have to give a shout out to Paula on customer service. She was amazing! My first shipment was damaged and missing a vital part. Paula had another one shipped right away and made my return shipment a breeze. She stayed in contact with me to the end. I felt like she shared in my joy once the install was complete! The hitch is super adjustable for optimal placement in the bed and height of the trailer. Make a few quick measurements and it just goes together quickly. Love the dual jaw release lever. Our last 5th wheel hitch had the standard pull to release lever and it was often very difficult to operate. This lever style is a game changer. Overall, I couldn't be more pleased with the product and customer service!

Click to Enlarge

Click to Enlarge

I installed this system in my classic square body Silverado after installing the Turnover Ball BK1400 gooseneck hitch. Both work great together and this companion installed beautifully. I tow a 40’ Cougar camper with it.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This product has worked perfect for me using with my 2012 Wildcat Sterling 5th wheel. Customer service is the best at etrailer.com. Just love doing business with them!

I bought a new trailer recently that weighs 16k and I just didn't feel secure using my Reese pro series 16k to Haul with. So I started looking at various hitches. I've had 3 other fifth wheel hitches in the past. All of them have been 15 and 16k models. What I never liked was the latching system. I've even had a trailer come out of the hitch due to a poor latching hook up. There wasn't an good way to lock the hitch. Some of it was my fault and some was a poor design. When I saw the Curt Q20 had a latch on the handle and also was color coded I was hooked. This hitch satisfied my want list. It arrived 4 days after I ordered it and like other comments I've read it was full of heavy duty staples. It was double packaged. There had to be over 50 staples. It was defiantly packaged securely. After dimantaling the packing I finally got to the hitch. There were a few scratches on the hitch from all the staples but a bit of black touch up paint took care of that. After all the hitch is going to be used and get scrached by me anyways. Four bolts and it was together. It fit perfictly it my existing rails. By the way it's heavier than my other hitches. I wound be apprehensive to pull my new trailer. If your looking for a great hitch at a great price you can't go wrong.

Click to Enlarge

Great hitch, super easy to install Stepped up to a 20k hitch for my new truck

Click to Enlarge

Click to Enlarge

The hitch works very well, the only thing I didn't like is one of the handles for the headpiece is welded a little off. It's like this is a factory second. You can see that the one is not parallel.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I recently purchased a Reese M5 20K hitch for my new Silverado 3500HD, Crew Cab, 8’ bed. As usual, Etrailer pricing was very good and with free shipping to boot. The hitch arrived via UPS in just a few days after placing the order. Following the detailed instructions provided by Reese, the install into the factory “puck” system, was fairly straight forward. However, a word of caution concerning the install. There are 4 15/16” bolts that need to be torqued to 220-foot pounds and are somewhat difficult to get to. Fortunately, I was able to borrow a torque wrench that would accommodate the recommended foot pounds of torque. Also, you may have an issue if you need to place the hitch at its highest position. The release handle might protrude above the bed rails of your truck in this position. This will be a problem if you have a bed cover. Reese is/was well aware of this issue and sells an after-market handle that will correct this issue. Etrailer lists this handle on their Web page.

Click to Enlarge

Installed in a 2018 GMC 3500 LB SRW Overall it was really easy to put together. Its light enough move in and out and very sturdy. I did not have a clearance issue with the Backflip cover regarding the stock handle. See pics. Just a heads up, I had an issue with the threading in the legs, etrailer was very understanding and sent me out replacements supper fast. I contacted Reese regarding paint guncked up in the threading and they were aware of the issue, they recommended running a wire brush or a tap to clean it out.

Click to Enlarge

Click to Enlarge

Click to Enlarge