# 1
Curt Ball and Safety Chain Loop Kit for GM/Chevy/Ford/Nissan Underbed Gooseneck Trailer Hitch - 30K
The folks at E Trailer were great to work with. Carol C. was who I dealt with and she listened to my concerns and made sure my order was perfect.
Works awesome. It is very nice and I love the hard case it comes in. It keeps everything where you need it and makes it easy to store when not in use. Thanks again I love it.
# 2
Reese Elite Series Pop-In Ball Kit for Ford Super Duty and Nissan Titan XD Under-Bed Gooseneck Hitch
Received the product, an email asking if I had any problems placing the order, communicated with Jackie-technical expert at etrailer.com all happening in less than 72 hours from placement of the order. Thank you! Len-
Looks great!!! Came in on time. Great price. Love the bag to keep it all in. Not as bulky as a case.
# 3
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
What i like about the b&w is that when not in use i can flip the ball over and load what ever i want in the bed .
Great hitch! I'm a pretty avid do it yourselfer so I did the install myself and it was relatively simple. The directions that came with the hitch had all the information I needed. It works well with my trailer and the quality seems to be pretty good. It's pretty low profile while you're not using it as well. Overall very happy with it. A couple of install notes for squarebody Chevy, GMC trucks which is what I installed mine on: You will need to lift the bed off the frame just enough to slide the hitch between the bed floor and the top of the frame rails so if your truck is rusty like mine, you may want to have new bed mount hardware on hand before you start in case you have to cut the old bolts to get them out. Also, the safety chain loops land right on the ridges in the bed floor so they don't recess completely flush even when they're not in use but so far it hasn't been a problem for me. I saw that mentioned in some other reviews on here so I already knew before I bought the hitch.
# 4
B&W Ball and Safety Chain Kit for Ford, GM, Chevy, and Nissan Titan XD Underbed Gooseneck Hitch
Nice gooseneck ball. Fits my 2024 gmc 2500HD perfectly.
# 5
Curt Ball and Safety Chain Loops Kit for Ram Underbed Gooseneck Hitch - 30K
The folks at E Trailer were great to work with. Carol C. was who I dealt with and she listened to my concerns and made sure my order was perfect.
Works awesome. It is very nice and I love the hard case it comes in. It keeps everything where you need it and makes it easy to store when not in use. Thanks again I love it.
# 6
Curt Ball and Safety Chain Loop Kit for Chevy, Ford, GMC, and Nissan Underbed Gooseneck Hitch - 38K
The folks at E Trailer were great to work with. Carol C. was who I dealt with and she listened to my concerns and made sure my order was perfect.
Works awesome. It is very nice and I love the hard case it comes in. It keeps everything where you need it and makes it easy to store when not in use. Thanks again I love it.
# 7
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
I purchased this to pull a 25Ton GN trailer with heavy equipment and so far it works great! Good price point and reliable product. I would highly recommend this product and trailer. Thank you!
Great product, handled my 18,000lb GVW 5th Wheel with-out issues. Fast delivery and great customer service too!
# 8
B&W Ball and Safety Chain Kit for Ram Underbed Gooseneck Trailer Hitch
This is more for the etrailer people - Super helpful customer service. Thanks to everyone to helped me find the right ball and safety chain kit for my truck. I ended up having success with the Curt brand and you made the return on the B&W smooth. I appreciate the help, felt a bit more like I was shopping locally with people I knew, instead of online. Thanks again,
# 9
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
# 10
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
I like the hitch but when ai am pulling my trailers, and I am moving them around at low speeds it seems that there is a good amount of movement in the hitch and the feel in the truck. I’m not sure what that is but I have used trucks that didn’t have that feel in them but mine definitely does. We followed all directions and torqued all bolts to the required amount. Maybe someone can shed some light on what that maybe. Thanks
The kit arrived in two days. The quality is very good. All the parts fit as described. We were able to install it in a few hours without a lift. We plan on pulling a 14,000 # trailer to move farm equipment. This trailer will replace an old 12,000# pintle hitch trailer. I would definitely recommend this kit to others.
# 11
B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs
I got a reduce price on a B&W weld in five wheel ball mount do to cosmetic scathing on tow ball which was almost non excestant save 65 dollars as usual B&W makes the most high qaulty parts and e trail are always excellent shipping was faster than they said. Thx again for passing on the savings to the customer
Came in a timely manner, about a week from the time I ordered it to it delivered to my door step in Alaska. The hitch itself is very high quality with nice clean welds and sharp clean edges which took almost no prep work to weld in to the frame I had built for it. You could tell by looking at this that B&W uses nice welding equipment and employs quality welders. Overall very happy with this. Installed on Monroe flatbed on F-450 cab and chassis truck.
# 12
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Unit installed and pulled my fifth wheel to provincetowne Mass. Unhooked and pulled the ball out and picked up some firewood. Nice flat surface. Love it. Only way to go.
Great value and durability. Self install in about 3 hours and has remained solid since then. Put in about 10k miles towing a 31 foot trailer with it.
# 13
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Very nice and well built product, the instructions made sense and were very logical. nice to have made in the USA things available. Would highly recommend!
Install went easy, hitch works great. Only issue was the measurement to drill hole in bed of truck bed was off by ½".
# 14
Buyers Products 2-5/16" Fabricators Flatbed Gooseneck Hitch
I’ve had this for over a year now installed on my custom fabricated welding bed and it has been perfect. Put together well and definitely worked perfect for what i needed it for. I use it to haul my 43’ 5th wheel camper and haven’t had a single issue. Would definitely recommend and use this kit again.
The hitch works great, definitely the best option for my flat bed
# 15
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Ok first off. The paint adhesion of any b&w product is probably the worst I've seen for the money. The paint is the first thing that falls off. That being said if you know that already and take some precautions like I did then you can really easily fix this problem. I sandblasted the back half of my frame and did the 3 step por-15 method on everything. I currently live in Indiana and I do seldomly drive it in the winter but I hate rust and will be moving more south shortly. I por-ed every part that came with the hitch. Every bolt and nut got anti-seize. The bolts are also of basic quality and will rust fast. Anything that was metal on metal contact has a layer of marine grease to prevent the from from rusting in between. I'm extra but I felt that this was the only way to go to protect everything. It's still a great product and hasn't let me down yet.
I shopped around for a long time to find this hitch, then I contacted Jessica of etrailer she listened to my wants and helped me find what I needed at the right price. And shipped it to me right away, etrailer is the best. Thank You
# 16
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
I was very satisfied from ordering to instillation. Great people and very concerned about your satisfaction. Instructions were complete and easy to follow. Saved approximately 50% in cost. Thanks etrailer
I love my hitch . I love how I can turn it over and I can still have use of the full truck bed. I could of bought a cheaper hitch but the quality is by far better than other hitches I have owned in the past. Customer service was great after they helped me fix my ordering mistake. Very happy with my hitch.
# 17
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Great hitch! I'm a pretty avid do it yourselfer so I did the install myself and it was relatively simple. The directions that came with the hitch had all the information I needed. It works well with my trailer and the quality seems to be pretty good. It's pretty low profile while you're not using it as well. Overall very happy with it. A couple of install notes for squarebody Chevy, GMC trucks which is what I installed mine on: You will need to lift the bed off the frame just enough to slide the hitch between the bed floor and the top of the frame rails so if your truck is rusty like mine, you may want to have new bed mount hardware on hand before you start in case you have to cut the old bolts to get them out. Also, the safety chain loops land right on the ridges in the bed floor so they don't recess completely flush even when they're not in use but so far it hasn't been a problem for me. I saw that mentioned in some other reviews on here so I already knew before I bought the hitch.
Installation was straight forward and it's well built. Works smoothly. etrailer was awesome as usual with shipping and service. However.... ;) on the BWGNRK1400 for '73-'87 GM trucks, the predrilled holes in the hitch for the safety chain u-bolts are 6-1/4" each way from center of the ball. This places the matching holes you have to drill in the truck bed on the sloped edge of the ribs, not in the center of the valley as intended. The instructions read as if the holes are not pre-drilled but they are, so I contacted B&W and asked if I can drill new holes at 8-3/4" each way of the ball so that they center in the next valley and they said no, that will void the warranty. So I had to do some bodywork, cut, weld and grind to scallop the ribs around the anchors to they won't always be sticking up (defeating the flat floor intent of this hitch design). I saw guy on [online] noted this was an issue on his squarebody bed as well. B&W needs to look at this dimension for future installations to help out the next guy.
What our customers are saying:
"Very broad selection and outstanding service."