Best 2018 Mini Cooper Trailer Wirings

Product so far has worked great for a pinched/cut OEM 7pin cord. It isnt weatherproof like an OEM connector to the cord-as well as the female end of the connector but then its just the connector so totally sealed is not the design for this. It works fine & currently has saved me from having to purchase a connector & wire cord as 1 piece & some shennagins with installing that set up.

Dunno It took 36 hours from "shipped" email until it left the Wentzville P.O. this morning. Don't think it will get the other 400 miles by tomorrow morning.

Works, exact fit, high quality, coils tight so max of about 3.5’ perfect! Heavy duty wiring, great waterproof connections.

Item was just as I anticipated. It looks good, works great, and the delivery was as promised. E Trailer is a good place to do business.

I had to replace the old 7 wire cable because the male plug had been pulled off. I chose the WH54006-043 coiled cable. I used a 1/2 inch clamp to hold the cable up at the box and a Connect-to-Protect to hold up the male plug. The result Is clean and tidy. Thank you,

This should work great, installation is still on my to do list.

good quality connector just what i was looking for

I periodically pull a 12v pressure sprayer behind my lawn tractor. The 12v harness I originally made that clipped to the tractor battery was always cumbersome and became hazardous when it recently shorted out due to rubbing (and no fuse in line). So I finally took the time to do it right, mounted this connector to the rear next to the taillight, and created a hidden fused permanent harness to the battery, and of course utilized the mating connector for the sprayer harness side. This little connector was perfect, high quality materials (connector body and electrical terminals), high spring force on the cover when not in use, nice sealed design yet easy to plug/unplug. Very happy with this purchase and will likely buy it again.

Excellent Quick Delivery When you are driving a Test or NASCAR Hauler you need replacement parts very quick, just like a pit stop. Thank You very much for the rapid delivery. Mint Moore III Ford Performance Race Hauler Driver

A great little heavy duty plug that I use to connect my car to the rv when towing 4 down.

Great products, very good quality, completely satisfied

Worked excellent for wiring my cab over camper to in bed trailer plug-in.

This product works as expected. There is not too much to the installation, just plug it in properly and mount the ground wire. I did not find an easy way to mount this to my wife's Odyssey, or to the trailer hitch (item# 75270). Luckily, I do prototype design and manufacturing. So I came up with my own solution. I designed and made my own bracket to mount the 7 pole to the trailer hitch. It works like a charm, and looks great!

this connector along with the short L bracket and the mount bracket- gave me a nice connector to my hitch. Though I used the short connector and did have to slightly bend it to allow the 4 to 7 pole connector to fit. If Id bought the long L bracket-- It could have worked-- but bending a little worked well.

Simple. Functional. Perfect for our needs.

This adapter plugs in to the OEM receptacle without any excessive effort and the flat 4 pin connector on my utility trailer also plugs into the adapter without any excessive effort. As a bonus there is a cover for the 4 pin side of the adapter to protect it the elements when not in use.

It does what it is supposed to. Good product.

Great Product, works well.

Hot garbage. Terrible design that I'm stuck with because my trailer tongue is drilled for this plug shape and dimensions. If you look at the pics, the screws are at the back of the wire connector so the wires must be inserted at a 90° angle to the plug. If you tighten too much, you'll start shearing off strands of your wire. I ended up spending a couple of hours soldering in my wires through the screw threads and it's still a shakey looking affair. If you're options allow for literally any other design, don't buy this thing.

The only place that I was able to find the 5 pole round pin, everything is flat pin which made it difficult to locate. I'm very happy with my purchase! Thank you

It's working fine except the cardboard cylinder deteriorates.

A similar trailer light connector was installed on my motorcycle cargo trailer when I purchased it way back in 2003. When I purchased my new Gold Wing in 2019, I wanted to use the same type of connector. Since I had to add a new female connector to the bike, I decided to renew the male connector on the trailer. I especially like this connector because it always stays secure when connected. I also wanted the connections to be out of sight when not in use. I have pulled my trailer with this new connection for over 2,500 miles and it has performed great.

it is not the larger size plug that was originally on the trailer and i discussed with the service advisor when i called, which means i have to buy a transition plug.

I used this molded connector/cable to make the electrical connection between my truck wiring and my slide-in truck camper. It was easy to install and has worked flawlessly since.

My truck has a dual trailer connection - 4 pole flat and 7 pin RV. When using my utility trailer, the spring loaded door on the 4 pole side exerts pressure on the trailer plug and wire, causing it to bend severely. Thinking this would be bad for wiring longevity, I ordered this adapter, which goes into the 7 pin side, and the plastic, sturdy body of the plug takes the force of the spring loaded door without the door touching the wiring. Then, the 4 pole trailer plug simply plugs into the 7 way. No more stress on the trailer plug!!

Over a year of use and still works well with no wear and tear.

Perfect just what id hope for . the circuit tester was an added bonus. indicated left turn signal not working

Choosing the correct connector for my pop-up camper and F 150 baffled me before I asked etrailer for help. I got that help, bought the etrailer connector, and it worked like a charm. The lube that came with the connector was an unexpected bonus. Many thanks.

7 pole RV/trailer plug fit just like original plug on my truck. Haven’t had a problem with trailer lights. Thanks!!

I have a Ram 3500, this trailer connector was a perfect match. Easy install and works great.

eTrailer has come through again for us. Our 7/4 pin tow connector failed, and they were able to ship the same day we ordered. Our first stop to shop for anything our 5th wheel RV needs is eTrailer.

Installed the Hopkins muti-tow 7, 5, and 4 way flat connector this morning. I ripped the original connector that was attached to the bottom of the hitch receiver off when I was 4-wheeling into the Doll House campgrounds in the Maze District of Canyonlands a month ago. So, I cut a hole in the bumper and mounted the new Hopkins connector, cut off the old broken connector mounting bracket, and connected the factory wiring to the new Hopkins device. Hopkins product installed easily, looks great, is now out of the way, and has the flexibility of multiple trailer connectors when required. I am pleased with the product. Attached is a photo.

I used this harness to rewire a 10ft vintage RV. There was plenty of length to reach the rear lights. I used Scotch Locks to tap into the wiring for the side running lights. Very good product.

Very happy with every aspect of my order. Received product and quality appears to be outstanding. I’m especially impressed at the instructions made available to install the wiring harness, written with the product and link for video. All bases covered and follow up to make sure all goes well. Am confident of their assistance should I need it.

Simple and easy to use; just plug it in and connect it to the trailer harness. Works like a charm!

Not installed yet but looks as good as one used before in a former vehicle. The actual adapter I received is "Reese", which is a reputable brand for towing accessories.

Used on tow vehicle for hooking up wiring harness to motorhome

Easy install. Especially with the available videos

Of the seven wires only two were in the correct position, the ground and the 12volt hot.none of the others matched with the harness on the tow vehicle, which I purchased from etrailer and it was fine.

You guys are just amazing in every way. Thanks so much for your support and help on all my purchases.