# 1
Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector
This hooked right in with the rest of the system. One of the easiest parts of the install.
# 2
Adapter 4-Pole to 7-Pole and 4-Pole
Really nice trailer wiring adapter. Very easy install. Takes about 30 minutes with all the tools needed. Drill, 7/64 bit for pilot holes to mount the bracket, flat blade screwdriver and 11/32 nut driver and two #10 self tapping metal screws with locking split washers and a couple zip ties to tidy up the wiring harness.
This is a great adapter to retro fit connections on my 2011 Expedition. Simple to instal and great support from etrailer.com.
# 3
Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps
Couldn't get things working on my Jeep XJ. Ordered this set up and everything worked.
Not too difficult to install, but I would recommend using a car lift so you don't have to work from your back (review includes wiring harness and Brake Controller)
# 4
Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.
Çable good but after putting new 7way plug on truck cable wire colors did not match etrailers picture
# 5
Adapter 4 Pole to 6 Pole and 4 Pole Trailer Wiring Adapter
This adapter really cleaned up the installation and connected directly to the wiring harness. Maybe added an additional 20 mins to install this adapter but totally worth the time and money.
II use it on my towed vehicle behind the motor home. It allows me to take motor home power to a trickle charger in the towed vehicle and connect to the towed vehicle wiring. The four prong receptacle provides outlet to be used if there is ever in need for a four prong fitting good.
# 6
Pollak 6-Pole, Round Pin, Plastic Trailer Wiring Socket w/ Rubber Boot - Vehicle End
etrailer is OUTSTANDING. I have purchased several items from etrailer and they have been extremely efficient and courteous. I would encourage everyone to order items they need from etrailer.
Good quality
# 7
Pollak 7 Pole to 4 Way Connector Adapter
Exactly what I needed...Top Quality
# 8
Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Socket - Metal - Vehicle End
I've never really liked Flat-4 type connectors. Unless you leave them dangling, they usually require that you crawl under the vehicle to connect them. (...Murphy's Law dictates that this will always be when it's raining or snowing). This Pollak 4-pole round socket, along with a Tow-Ready harness, and matching trailer connector, provides a neat, factory installed look, that's more convenient, and durable. My orders from etrailer arrived quickly, and with great seller communication. A+
Excelent Quality! Parts was a perfect fit for the factory location.
# 9
Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector - Trailer End
I installed this connector on my travel trailer. The original connector had become loose and would fall out if not retained by the tab on the bottom of the connector. After a year of usage The Pollack connector still snaps into place and fits tight. Good product.
Routine trailer maintenance. Absolutely nothing worse than fighting trailer lighting or electric brake issues when traveling.
# 10
35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
Works very well after re-wiring trailer lights with waterproof distribution box.
2 things. 1st@: I think there should be an option to pick tinned wire. 2nd: The ring terminal for the ground needs to be bigger.
# 11
RoadMaster 6-Wire Trailer Connector - Vehicle End
I explained to Roger (I believe was his name) that I have a Blue Ox tow bar and base plate, The base plate was installed along with the wiring kit, but did not include the wire to go from the front of the grill to the interior of my Jeep to plug in my RVi brake, and this is what he sent me. I'm attaching a picture of what I have on my vehicle. Not only was it the completely wrong part, but it arrived in damaged packaging which I did not open. Please send return instructions.
# 12
Adapter 7 Pole to 4 Pole with Tester and Cover
ETrailer had exactly what I wanted at a fair price. Website was easy to navigate and purchasing was simple. Shipping was fast and I was kept notified right up to when I received my order.
Plugs in easily, shows that pins are producing voltage, and locks in place using the spring loaded door to the 7-pin.
# 13
Pollak 6-Pole, Round Pin, Trailer Wiring Connector - Trailer End
Quick shipping, will order from them again!
Exactly what I needed and It's a great fit
# 14
Mighty Cord Trailer Connector Adapter - 4-Way Flat to 7-Way RV Style - 12" Long
This is my second order with etrailer. Both experiences with your company have been very positive. The knowledge and friendliness -along with following up on orders and satisfaction have been much appreciated. Brittany, the customer representative, is a huge asset to etrailer.
Exactly as described and what I needed. Delivered quickly.
# 15
Trailer End Connector - 4-Flat - Coiled
GREAT ACCURATE REPLACEMENT WIRING.
Timely shipment. I’ve bought from your company before and haven’t been disappointed. Nice job.
# 16
Hopkins Endurance 6-Way Trailer Connector Socket - Vehicle End - Ergonomic Design
The stuff not here
Very difficult to make the wiring connections, I was afraid I’d have problems on down the road so, I took it out of circuit and threw it away
# 17
48" Long 4-Pole Loop with Cover
The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.
I have now installed the following on my 2017 Wrangler: Brake light relay kit . Hopkins Towed vehicle Tail Light wiring kit. Blue Ox base plate. Blue Ox Patriot Portable RF Braking System. All of this has taken about 3 days of work spread out over a week or so. Overall it went well. Not too many surprises. Crawling around under a car at 71 is a bit of a strain but I'll get over it. I must say that Donna P. has been a wonderful source of great information and has stayed right on top of the process. eTrailer has been a great source for this project. I would recommend you all with no hesitation.
# 18
Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector - Vehicle End - Ergonomic Design
Installed the Hopkins muti-tow 7, 5, and 4 way flat connector this morning. I ripped the original connector that was attached to the bottom of the hitch receiver off when I was 4-wheeling into the Doll House campgrounds in the Maze District of Canyonlands a month ago. So, I cut a hole in the bumper and mounted the new Hopkins connector, cut off the old broken connector mounting bracket, and connected the factory wiring to the new Hopkins device. Hopkins product installed easily, looks great, is now out of the way, and has the flexibility of multiple trailer connectors when required. I am pleased with the product. Attached is a photo.
Exactly what we had been looking for. Now I can hook up multiple trailers with different connectors and all the electrics on each trailer works. I mounted mine directly to the receiver hitch frame. The biggest challenge for us was routing the backup wire from the taillight housing, through the body of the truck to the connector. the rest went together fairly easily. Seems to be pretty solid and looks much better than the loose pigtail connector it replaced.
# 19
Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Vehicle End
Excellent Quick Delivery When you are driving a Test or NASCAR Hauler you need replacement parts very quick, just like a pit stop. Thank You very much for the rapid delivery. Mint Moore III Ford Performance Race Hauler Driver
A great little heavy duty plug that I use to connect my car to the rv when towing 4 down.
# 20
20 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 30" Ground
Wiring worked perfect for my project. I replaced the wiring on my 14 foot utility trailer. If I was to do it again I would buy the next length up. I would have liked to have a little extra wiring if I was to ever need it.
Your sales staff is second to none. Keep up the good work. You shipped minutes after I placed my order! Very impressed! Marty
What our customers are saying:
"Thank you! I enjoyed shopping your site."