Most Popular Wiring Adapters for 2018 Jeep Cherokee

This hooked right in with the rest of the system. One of the easiest parts of the install.

Really nice trailer wiring adapter. Very easy install. Takes about 30 minutes with all the tools needed. Drill, 7/64 bit for pilot holes to mount the bracket, flat blade screwdriver and 11/32 nut driver and two #10 self tapping metal screws with locking split washers and a couple zip ties to tidy up the wiring harness.

Click to Enlarge

I looked at so many options before deciding on the B&W hitch, but I have no regrets buying it. There is nothing that my car is suitable for towing that this thing can’t accommodate. I even use it on the front hitch of my mower to move trailers around the yard! Adjusts very easily and stows nicely (though on my Ford Edge it rides lower than I like when stowed).

Couldn't get things working on my Jeep XJ. Ordered this set up and everything worked.

Not too difficult to install, but I would recommend using a car lift so you don't have to work from your back (review includes wiring harness and Brake Controller)

This adapter really cleaned up the installation and connected directly to the wiring harness. Maybe added an additional 20 mins to install this adapter but totally worth the time and money.

Click to Enlarge

II use it on my towed vehicle behind the motor home. It allows me to take motor home power to a trickle charger in the towed vehicle and connect to the towed vehicle wiring. The four prong receptacle provides outlet to be used if there is ever in need for a four prong fitting good.

Exactly what I needed...Top Quality

This is for a 2014 Jeep Cherokee Latitude. It took me a little extra time as my helper was a 5 ton floor jack and it supported the receiver and if only my right foot had fingers it would have helped a lot. Loading the bolts and plates into the frame was a snap, I left the fish wires on the bolts and that helped a lot and I didn't lose a bolt into the frame,you must leave the exhaust hanging to get to the rear bolt closest to the exhaust curve just before the mufflers I didn't and it was a bear to torque it. Also after I cut the opening on the bottom of the bumper and already had torqued the receiver I had to pry the bottom edge over the receiver there was no other way to get the hitch up inside not enough forward space to get it to slide up and in. Other than that it was a snap. Now for the wiring harness, went well had a bit of a time getting the connectors up to the tail lights even with all 4 screws out and a little bit of play I had to pry the plastic support away from the body to get the connectors through. That was for the 4 flat, for the power for the harness I have a rig runner 4005 from Powerwerx for all my power as I am a volunteer Fire Fighter and have all the goodies that goes with it and every thing runs fine. For the 5 flat all I had to do was find and take out the backup bulb in the tail light and test to find which wire was hot. And then it was over and done put it all back together and drive away with my trailer. Sorry no picture it looks just like the factory/dealer put it on. Ray H

Simple and easy to use; just plug it in and connect it to the trailer harness. Works like a charm!

ETrailer had exactly what I wanted at a fair price. Website was easy to navigate and purchasing was simple. Shipping was fast and I was kept notified right up to when I received my order.

Plugs in easily, shows that pins are producing voltage, and locks in place using the spring loaded door to the 7-pin.

This is my second order with etrailer. Both experiences with your company have been very positive. The knowledge and friendliness -along with following up on orders and satisfaction have been much appreciated. Brittany, the customer representative, is a huge asset to etrailer.

Exactly as described and what I needed. Delivered quickly.

The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.

I have now installed the following on my 2017 Wrangler: Brake light relay kit . Hopkins Towed vehicle Tail Light wiring kit. Blue Ox base plate. Blue Ox Patriot Portable RF Braking System. All of this has taken about 3 days of work spread out over a week or so. Overall it went well. Not too many surprises. Crawling around under a car at 71 is a bit of a strain but I'll get over it. I must say that Donna P. has been a wonderful source of great information and has stayed right on top of the process. eTrailer has been a great source for this project. I would recommend you all with no hesitation.

Click to Enlarge

Click to Enlarge

We had been having trouble with our other adapters, no brakes or intermittent brakes. This adapter fits better than any of the others ever have, great connection and is holding tight. I will be picking up some more of these. The only downside to me was they came on the value shipping which is rather delayed for us and I would rather pay to get it here more quickly. I was needing it and it was several days getting here. We ship a lot and I know shipping directly with USPS goes faster than that and is not expensive.

Added the gooseneck trailer plug in bed and I wanted to be compatible with new and old style plugs. Adapor worked great.

Arrived quickly. I didn’t need to wire the extra lead to my reverse lights because my trailer doesn’t have surge brakes or backup lights. Simply plug and play.

Perfect for converting 4 wire Ford Expedition trailer harness and boat trailer to 5 wire. The Expedition had a backup wire run to the area of the 4 wire plug so made the conversion easy.

Works, exact fit, high quality, coils tight so max of about 3.5’ perfect! Heavy duty wiring, great waterproof connections.

Item was just as I anticipated. It looks good, works great, and the delivery was as promised. E Trailer is a good place to do business.

Click to Enlarge

My '92 GMC Sierra had a 6-pin trailer harness connector and I'm going to be pulling a pop-up camper in a few weeks that has a 7-pin connector. I originally ordered a 47435 6-Pole to 7-Pole Trailer Wiring Adapter. After thinking about it for a day I changed my mind and ordered a HM48470 Hopkins Endurance Multi-tow 7-way, 5 & 4-wire Flat Connector to mount in the bumper and a HM47570 Hopkins Endurance Multi-tow Connect Adapter - 7-way To 6-way, 5-way and 4-way. The HM48470 will allow me to pull the pop-up as well as giving me the 4-wire flat connector that I need for my boat trailer. I bought the HM47570 adapter just to cover all the trailer wiring needs I might run into. I really like the fact that the 47570 adapter has the quick change plug to cover both wiring arrangements for 6-pin trailer connectors. I placed the original order Saturday evening and the second order Sunday afternoon. Monday morning, I called etrailer.com to try to cancel the first order and was told that both orders were already boxed and on the way the shipper. I had no idea that they had people there to pull and box orders on the weekend. I asked about returning the first order when it arrived and was told by Helen M that it would be no problem at all. I have been extremely pleased with my purchase experience with etrailer.com. Everyone I spoke with there was very knowledgeable and I will not hesitate to go directly to them for my trailer and towing needs in the future.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I needed an adapter for my electrical towing harness so the that I could use a 5-Way connector on my 7-WAY plug. On line, I found and ordered Item No. HM47570 "HOPKINS ENDURANCE MULTI-TOW CONNECTOR ADAPTER - 7-WAY to 6-WAY, 5-WAY or 4-WAY." When I received the product, I was really stoked, it was exactly what I needed and what I had been looking for! I tried it on for "size" as you might say and it's going to work like a charm. I will send some photos later when I'm done with the installation! No time right now. . this coming weekend! Photo 1&2 my connector; Photo 3&4 the new HM47570; Photo 5,6,&8 the light bar I wanted to install and the completed project. Thanks a bunch!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Great build quality, but unfortunately it will not work to legally use a 4-pin trailer being towed by a 7-pin Euro/Land Rover plug. Its simply mapping 4 of the 7 pins to the following pins on the 4-pin side. Left running, Right running, Stop and negative, there is no provision for indicators or dual sided brake lights. It needs diodes (which it does not have) to do this. etrailer just needs to update the description as this is a good basis to make various adapters.

Received product in good order, well packaged, initial some delay, manufacturer was chased by etrailer, and earlier dispatched by manufacturer; delivery trail clear stated, very good. On receiving verified at UHAUL: connect with 1983 Land Rover (Defender) 110 Stationwagon (photo: rear, while on transport): all functioned ok. Apparently some diode(s) included, as the 7 pin has individual stop light which translates as left AND right indicator on flat pin. Emergency flashing (all indicators left and right) tested ok at UHAUL (connecting to trailer). LR has European homologated 3.5 metric Ton (7700 lbs) tow hook and has done some 60,000+ miles towing with current odometer reading 578,000+ km (on/about 360k miles)

Click to Enlarge

I ordered this wiring kit for a 2003 Dodge Ram 1500 I recently acquired. The Ram was not tow ready but did have a factory 4-way. I also ordered hitch #13333. The wiring kit is very high quality and was easy to install. The 7-way fit perfectly where the factory 7-way would have gone. I'm using a Tekonsha Prodigy RF wireless brake controller so the blue lead was not needed but I left some extra should that change. Thanks etrailer!

Click to Enlarge

Click to Enlarge

Click to Enlarge

makes for a faster hook-up from Truck to trailer. What is outstanding is the plug lights, when connection is made.

Cathy T was a FANTASTIC help in finding the exact right product that we needed!!! It's sometimes difficult to understand what we need because what we may call an "extension cable," may actually be labeled as a "wiring adapter" or "trailer connector." She was very patient and thorough as she found us the precise product for us. She was also knowledgeable about Jayco trailers, knowing their uniqueness, which also helped her in finding us the right product. And this product is absolutely the exact item we needed!! We luv it cuz it's easily visible for us, as well as law enforcement on the road!! Thank you for your expertise and great selection which provided us with what we need!!

fits the plug perfect....just got a goldwing used, haven't had a chance to ensure it (the bike) was wired correctly for a trailer. no fault of the product, just wish its wireing was a bit long due to the way the plug was intigrated into the underside of the tour trunk.

Click to Enlarge

Works great! Took a few minutes to figure out the rv side and get it set up so the round RV part Correlated in the correct way to the standard four flat wiring. But it went smoothly.

Bullet-proof connector, if not the most elegant. Used in my case for custom "adventurization" wiring on my 2007 BMW F800ST motorcycle, now just road tested this late summer - early fall 2017 on a three month, 18,000 mile loop out of Chicago through the Arctic & Pacific Northwest, including the Dempster & Dalton Highways. Had a custom wiring harness that had to be able to be removed in order to get at the engine, hence the need for the connectors. A few photos should be attached.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This is a product that I needed for my project, but was not easily found and available. etrailer.com not only had the product, but had it at a great price. Shipping was very fast and free for the amount I ordered. Overall, this was a great shopping experience. I made a bulk order of 16 as I am manufacturing trailers that are towed behind motorcycles. This product gives me the six conductors that I need in a very small package, which is great due to the size of motorcycles compared to cars or trucks. The only thing that could be improved with this product would be if they came with dust caps for each connector, or at least one for the vehicle side to prevent dust and moisture intrusion while the trailer is not in use. Keep up the excellent service and selection.

Click to Enlarge