Most Popular Hardwired for 2018 Chevrolet Express Van

One of our Technicians has about 20 years in truck aftermarket setup and thought that this rear view camera was as good as it gets. In all, the quality, installation flexibility, video quality and adjustments made this product something that we will purchase again. The compass and temperature were a bonus as well as remote control adjustments for grid lines , brightness and such. This shipped very quickly and all components are well labeled and packed. The directions are easy to follow. Our installation is mounted below a safety warning LED light so it is protected but something etrailer might think about is a surround escutcheon type thing for added protection.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This style of camera in the mirror solves a lot of location problems on the dash. A good engineered product that should outlast the vehicle its installed on. I had good service from Etrailerr and the item was delivered intact and promptly.

I just recently purchased and installed the hopkins camera HM60195VA and say I love it. It's an easy install for my dodge challenger and helps out beyond words when backing up. The install only took about an hour and if your not really looking you can't tell there is a camera there. The wiring was simple and plenty long enough and the monitor looks like it belongs there. I highly recommend this set up.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Works great, especially for hooking up my trailer. Was a easy install, good instructions. The only thing I needed extra was zip ties for attaching the cable to the frame. Installed it on a 2000 Ford, F-150 Harley Davidson edition.

Click to Enlarge

No problems. Works as advertised. I use to have a wireless camera, but that would disconnect now and then, or pick up some ones security camera when driving by. Wired connections are the way.

WORKS GREAT...smooth install with the helpful video on your website

Well! It's with great coincidence that it stop working last week. Worked fine and now has stopped! This is our second one which lasted 8 years...traded with car! I now have to remove the back of our 2022 Chevy Trax to see what's going on!

Installed on 2015 Kia Sorento. My particular installation was simple . I new it would be , that is why I chose this product. My backup lights are located on the back door hatch. Removed three small opening covers and exposed the opening to the light wiring and gained access to " fish wire and connector through, without removing paneling. Connections were literally a "snap". All was achieved within the back door panel. The unit seems to work fine but is lacking corner activation, which is to be expected with only two sensors. My particular application will not sense a small dog even when sensors are pitched lowest possible.( high licence plate). Had to disconnect and reconnect connector with white alignment dots numerous times before unit worked properly. Overall, I would say it functions very well . It is very adequate for my needs and at a reasonable price. I Couldn't give it 5 stars because of the connector problem. How it does in the future. only time will tell .

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I rounded a curve in the road to find a deer froze in the left lane looking for where the sound was coming from. As I approved it back of the road like a scolded dog its back to me trying not to be seen. Based on that experience I think it works!

Although not yet installed, the product is much the same as the much more expensive hornet. Have had the hornet operating for seven years until the undercarriage signal module broke off. It is advantageous to mount the "module" under the hood. Thank you!

The camera is of high quality, as is the rearview mirror and monitor. I did have to return the first mirror because the bracket didn't match my 2013 Ram 1500's windshield mount, even though it was listed as a universal fit. The Ram has a triangular type fitting. I tapped into the reverse light wiring for power. l ended up having to replace the incandescent reverse light bulbs with LED bulbs because the monitor image flickered badly until I installed the LEDs. I think this was because the BCM (Body Control Module) got confused with the additional power draw. Since then the camera and monitor have worked flawlessly. It provides a great view behind the truck, even at night. Because of the placement on the bumper it doesn't have a good view of the hitch ball, but I don't tow very often. Overall I have been very pleased and feel that the camera is well worth the price.

Click to Enlarge

Outstanding parts knowledge and a high quality products!

My wife rode with a friend for lunch who had a new car with a back-up camera. She was really impressed and was talking about buying a new car to replace her 2011 Ford Escape that would have the backup camera. I found a video showing how to install the camera on an Escape by etrailer. I was impressed by the company and bought a unit. It arrived quickly and I was able to install it following the instructions I had watched. It took me a couple of hours to install, the hardest part being fishing the cables to the rear of the car. Once installed it worked great. My wife is very, very happy with the install. She says she is much more confident in parking her car. Thanks a lot. I would, and do recommend etrailer and the back up camera kit.

im very pleased with the product (camera & rear view mirror) takes a little work to get the cables run through your vehicle (f150) and finding a good power source (my problem) had one issue with a cable mfg took care of it over all had it installed for 1 year very happy got it manly for conecting to our travel trailer but use it all the time now

I installed this in an F150 and 19ft trailer combination. The install went reasonably easily, after I had worked out how to route the wiring. In general the item works ok but my main issue is how difficult it is to navigate the software that controls the image. It appears that the brightness setting is set too low out of the box, so in bright conditions (when the sun is out), it is not easy to see what is on the screen. Trying to adjust brightness has been almost impossible. The remote is not always making a connection with the unit and there appears to be no way to make adjustments without the remote. Do you have contact info for the manufacturer, or perhaps you've had previous feedback about this? Thanks.

I installed a backup camera on my 40' 5th wheel travel trailer. LOVE it! Dialed in the guidelines, flipped the image to mirror view and can nail the tight parking spaces like a professional. Lets me keep an eye on the bikes on the bike rack too. The night vision feature is great. The microphone/speaker works well when I need a real person spotting (which is almost never now). Now my wife can just talk to me, no more yelling. Installation wasn't too difficult as the cable fit behind the weather strip along the corners of the coach. If you want to know what's in the blind spot behind you, good choice here. And the monitor has 2 more video connections to use too. Might add a hookup camera next. Anyway, buy it.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Exactly what I needed for our venerable 2003 Jayco travel trailer. 3D printed a very neat unit that holds the display and fits into a “sunglasses pocket” on the top of the dashboard of our Chevy Colorado pickup.

superior upgrade for us. would have been 5 star but the installation and usage instructions are almost worthless. 8^)

I am very happy with it.

This style of camera in the mirror solves a lot of location problems on the dash. A good engineered product that should outlast the vehicle its installed on. I had good service from Etrailerr and the item was delivered intact and promptly.

Great unit. My only recamindashion would be to watch the instal video and get everthing needed to install in one ordre.

There was a missing clip necessary to activate the brake lights.

The installed led light harness almost fits the brake light housing. I had to make a few modifications to make it fit. Other than that it works perfectly.

Every thing in the kit look like good stuff haven't installed yet.

Image only covers 1/2 the mirror & is too small to see any details

Hard to see in bright sun other than that easy to install