# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Very sturdy ball mount. Very easy to install.
Fit and finish are great and is obviously a very well made ball mount.
# 2
Draw-Tite Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 8-1/2" Long - 16K
should at leat include the pin to secure it to the hitch
super strong, solid bar which has now worn out at all. we had the tubing one and it only lasted a year but this is not showing any wear.
# 3
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
2007 Toyota Tundra 5.7L, 7X14 Parker flatbed tandem axle utility trailer 7700 lb capacity. I've only used it once since purchasing it, but compared to my previous non-cushioned ball mount it does an excellent job cushioning the load and keeps the trailer from banging the mount in the box and shaking the truck upon braking and acceleration. Very nice when hauling 2+ tons of cargo. Fast shipping from etrailer too.
Have used this product before on another truck, worth the extra cost. Gets rid of the jerk/bump at stops and acceleration.
# 4
Hidden Hitch Ball Mount - 3/4" Rise, 2" Drop - 15-3/4" Long - 6,000 lbs
accurate details!
Attaching the trailer was easy and provided me a higher comfort level when backing up to center the ball under the hitch because I had more room between the coupling and my Tundra. Additionally this product provided me the ability to open my Tundra bed door while my trailer is attached. Lastly it provides me a greater turning radius when backing up. I would recommend this product.
# 5
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
This product is very heavy duty and the price was great. It fit perfectly and looks very good on the 2017 Toyota Tundra with a 6 inch lift. I would definitely recommend this product.
Great workmanship/quality and made in the USA.
# 6
Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 2" Drop - 15,000 lbs
Product arrived earlier than expected and it fit perfectly on my vehicle. I had conducted extensive research for an equivalent product and this was the best value for the price. I don't anticipate having any problems towing my trailer with this hitch. I put a locking pin on the hitch to discourage potential theft.
Great quality. Just as advertised. Expect it to work very well.
# 7
Convert-A-Ball Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 14,000 lbs
I purchased the AMSC10 because I needed a 10" drop hitch to tow my lowboy enclosed trailer with my lifted Toyota Tundra. I tried several other types of hitches with this towing combo and I was always disappointed. Mostly because of the fit/sloppiness of the ball mount into the receiver. This would cause a lot of noise and the feeling of the trailer "bucking" while hitting bumps and such. The other hitches that I tried were those cool aluminum ones, both a fixed one and an adjustable one. Although they were pretty, both left me very disappointed. The shipping for this hitch from Etrailer was fast and efficient. I received emails informing me of my order status throughout the whole process. Upon receiving my AMSC10, I tested it out and found it to be a much nicer fit into the receiver. Once I hooked up to the trailer and began to tow, the difference was extremely noticeable. This hitch is quiet, it doesn't buck, and in fact, comparatively, you wouldn't even know the trailer was behind you unless you looked. I am actually really excited about towing with this hitch. I know it sounds goofy, because it is, but it makes the task so much more pleasurable with the cushion ball mount. I'm already thinking about buying the 8" drop for my normal trailers.
2007 Toyota Tundra 5.7L, 7X14 Parker flatbed tandem axle utility trailer 7700 lb capacity. I've only used it once since purchasing it, but compared to my previous non-cushioned ball mount it does an excellent job cushioning the load and keeps the trailer from banging the mount in the box and shaking the truck upon braking and acceleration. Very nice when hauling 2+ tons of cargo. Fast shipping from etrailer too.
# 8
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
Fast shipment of exactly what I ordered. Product should work great.
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
# 9
etrailer Ball Mount Kit - 1" Rise or 2" Drop - for 8,000 - 16,000 lb Hitches
This is one of the items that has saved me a LOT of time. Since I use both my truck and my car (both have Curt hitches ordered from etrailer) for towing my half dozen or so different types of trailers, I am constantly needing to adjust the ball size and/or height depending on the combination of vehicle and trailer. With this kit is takes literally less that 30 seconds every time for me to configure to exactly my needs. Also, the bag is excellent for keeping crud and ball grease off my vehicle interiors and is big enough to hold a ball wrench inside as well. Cannot beat the price either for so much convenience and saved time.
Fits my Tundra like a glove and don't have to worry it the trailer is going to break the tow hitch not with this one.
# 10
Curt Heavy Duty Forged Ball Mount for 2" Hitches - 1" Rise - 2" Drop - 17,000 lbs
This product is very heavy duty and the price was great. It fit perfectly and looks very good on the 2017 Toyota Tundra with a 6 inch lift. I would definitely recommend this product.
Just what I needed 4 in rise. Well made.
# 11
Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
Great product. Lucky that this product was heavy steel. The package was damaged and was taped back up. Product was not damaged.
Thank goodness for an extended length ball mount. I recently purchased a new 2 horse bumperpull trailer, and the tail gate was interfering with the jack post. Not acceptable! I looked for the highest quality extended length ball mount and found it with this product. Problem solved see pic. ARRIVED IN 2 DAYS! Thank you eTrailer.
# 12
Curt Ball Mount for 2" Hitches - 1" Rise, 2" Drop - 9-3/8" Long - 10,000 lbs
This product is very heavy duty and the price was great. It fit perfectly and looks very good on the 2017 Toyota Tundra with a 6 inch lift. I would definitely recommend this product.
Just what I needed 4 in rise. Well made.
What our customers are saying:
"very easy to shop"