Most Popular Hardwired for 2017 Ford F-250 Super Duty

Image only covers 1/2 the mirror & is too small to see any details

Hard to see in bright sun other than that easy to install

The quality of the parts seem good but the directions to install everything were horrible (essentially none existent) and I had to go to [online] to figure out how to remove my factory mirror for the new mirror install and the wiring I figured out by trial and error. The camera kit should have included longer screws to replace the stock screws on the F250 brake light. The order was delayed about a month due to supply chain shortages. Once I got got it all together it works well, just disappointed in the instructions and should have provided replacement screws.

The directions are poor at best. You have to figure it out on your own, which isn't a real big problem, but some additional information would be nice. The bezel for the camera is nice, but doesn't fit 100%. Its close enough, but you have to play with it a little. Additionally, I'm not sure why the camera has a 6' cable, then there is a REQUIRED 24' cable to then connect to another 6' cable to the mirror. I'm wanting to install the mirror in my truck, not the truck in front of me. I don't need 36' of cable, its a Crew Cab, not a buss. So it means you have ALOT of cable to stash. Also, other than changing the brightness, I have no idea what the POWER button on the mirror does. I wired to a switched power source figuring I could just press the power button to turn the monitor on and off. Guess what.. you can't. It is ON. To have this work right, you'd have to figure out a way to wire it to the reverse light switch. And once you find this issue (despite the item description clearly stating the power button can be used to turn it on and off), good luck getting help from etrailer. Was told I would be contacted by someone from technical support days ago... its been crickets. It also sucks the mirror is autodiming, despite what looks like light sensors front and rear, it does not dim (only found that mentioned in the two page "manual/install guide".

Well! It's with great coincidence that it stop working last week. Worked fine and now has stopped! This is our second one which lasted 8 years...traded with car! I now have to remove the back of our 2022 Chevy Trax to see what's going on!

Installed on 2015 Kia Sorento. My particular installation was simple . I new it would be , that is why I chose this product. My backup lights are located on the back door hatch. Removed three small opening covers and exposed the opening to the light wiring and gained access to " fish wire and connector through, without removing paneling. Connections were literally a "snap". All was achieved within the back door panel. The unit seems to work fine but is lacking corner activation, which is to be expected with only two sensors. My particular application will not sense a small dog even when sensors are pitched lowest possible.( high licence plate). Had to disconnect and reconnect connector with white alignment dots numerous times before unit worked properly. Overall, I would say it functions very well . It is very adequate for my needs and at a reasonable price. I Couldn't give it 5 stars because of the connector problem. How it does in the future. only time will tell .

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

This was fairly easy to install. Works great for lining up on our fifth wheel trailer hitch.

Was easy to install and the quality of the picture was rather surprising. Very clear and bright. Definitely recommend for anyone wanting to ease the hookup for a Fifth Wheel with a goose neck adapter.

I installed this in an F150 and 19ft trailer combination. The install went reasonably easily, after I had worked out how to route the wiring. In general the item works ok but my main issue is how difficult it is to navigate the software that controls the image. It appears that the brightness setting is set too low out of the box, so in bright conditions (when the sun is out), it is not easy to see what is on the screen. Trying to adjust brightness has been almost impossible. The remote is not always making a connection with the unit and there appears to be no way to make adjustments without the remote. Do you have contact info for the manufacturer, or perhaps you've had previous feedback about this? Thanks.

I installed a backup camera on my 40' 5th wheel travel trailer. LOVE it! Dialed in the guidelines, flipped the image to mirror view and can nail the tight parking spaces like a professional. Lets me keep an eye on the bikes on the bike rack too. The night vision feature is great. The microphone/speaker works well when I need a real person spotting (which is almost never now). Now my wife can just talk to me, no more yelling. Installation wasn't too difficult as the cable fit behind the weather strip along the corners of the coach. If you want to know what's in the blind spot behind you, good choice here. And the monitor has 2 more video connections to use too. Might add a hookup camera next. Anyway, buy it.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

No problems. Works as advertised. I use to have a wireless camera, but that would disconnect now and then, or pick up some ones security camera when driving by. Wired connections are the way.

WORKS GREAT...smooth install with the helpful video on your website

I just recently purchased and installed the hopkins camera HM60195VA and say I love it. It's an easy install for my dodge challenger and helps out beyond words when backing up. The install only took about an hour and if your not really looking you can't tell there is a camera there. The wiring was simple and plenty long enough and the monitor looks like it belongs there. I highly recommend this set up.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Works great, especially for hooking up my trailer. Was a easy install, good instructions. The only thing I needed extra was zip ties for attaching the cable to the frame. Installed it on a 2000 Ford, F-150 Harley Davidson edition.

Click to Enlarge

I am very happy with it.

Every thing in the kit look like good stuff haven't installed yet.

My wife rode with a friend for lunch who had a new car with a back-up camera. She was really impressed and was talking about buying a new car to replace her 2011 Ford Escape that would have the backup camera. I found a video showing how to install the camera on an Escape by etrailer. I was impressed by the company and bought a unit. It arrived quickly and I was able to install it following the instructions I had watched. It took me a couple of hours to install, the hardest part being fishing the cables to the rear of the car. Once installed it worked great. My wife is very, very happy with the install. She says she is much more confident in parking her car. Thanks a lot. I would, and do recommend etrailer and the back up camera kit.

im very pleased with the product (camera & rear view mirror) takes a little work to get the cables run through your vehicle (f150) and finding a good power source (my problem) had one issue with a cable mfg took care of it over all had it installed for 1 year very happy got it manly for conecting to our travel trailer but use it all the time now

There was a missing clip necessary to activate the brake lights.

The installed led light harness almost fits the brake light housing. I had to make a few modifications to make it fit. Other than that it works perfectly.

Exactly what I needed for our venerable 2003 Jayco travel trailer. 3D printed a very neat unit that holds the display and fits into a “sunglasses pocket” on the top of the dashboard of our Chevy Colorado pickup.

superior upgrade for us. would have been 5 star but the installation and usage instructions are almost worthless. 8^)

I would have given this a higher score if it were not for the lack of decent instructions or how the mirror actually works, Secondly, I don't like the fuse placement on the mirror, I will splice it out and add it somewhere else that is accessible. I do like the fact you can connect 3 cameras, again, no instructions how the mirror switches between the two. After testing, when a camera is powered, the screen show that particular camera. I will be adding the cargo cam and an additional front cam to my aux switches so I have control over them. Also, the cargo cam is 620 lines, as advertised but no specs on the mirror monitor. After receiving the item, the mirror only produces 480 lines. Not deal breaker as the picture quality is good for a 4.3" screen. Haven't installed yet, but did bench test on the cargo cam as well as an additional cam I purchased. Works flawlessly. Overall, not a bad product, just need some more info/instructions and options for the mirror fuse.

THE ITEM WAS CORRECT AND IS EXACTLY WHAT MY CUSTOMER WANTED

The camera is of high quality, as is the rearview mirror and monitor. I did have to return the first mirror because the bracket didn't match my 2013 Ram 1500's windshield mount, even though it was listed as a universal fit. The Ram has a triangular type fitting. I tapped into the reverse light wiring for power. l ended up having to replace the incandescent reverse light bulbs with LED bulbs because the monitor image flickered badly until I installed the LEDs. I think this was because the BCM (Body Control Module) got confused with the additional power draw. Since then the camera and monitor have worked flawlessly. It provides a great view behind the truck, even at night. Because of the placement on the bumper it doesn't have a good view of the hitch ball, but I don't tow very often. Overall I have been very pleased and feel that the camera is well worth the price.

Click to Enlarge

Outstanding parts knowledge and a high quality products!

This was by far the worst purchase I have ever made. This product is more of a hazard when driving then a help! I had it professionally installed on my 2021 GMC Canyon. If I use my turn signal, the buzzer goes off then while driving road signs, mail boxes, trees , shrubs and almost anything on either side of the road set the indicator lights and buzzer off. I would highly recommend trailer discontinue carrying this product as it is Junk

Overall, the installation went well. The video helped lot. I chose to not use the clips on the console, and mounted it underneath on the top of the bezel around the instrument cluster. The on/off switch was kind of hard to get to, so I incorporated my own switch on the dash. By running a separate ground wire through to the dash to that switch, I was able to achieve this. I use the on off switch when hooked to a trailer. This unit seems to fill my backup sensor needs, without an extra effort to install. Works pretty good too.

Click to Enlarge

Click to Enlarge

Click to Enlarge

great product , a lot less expensive than factory