# 1
24x60 Reese Cargo Carrier for 2" Hitches - Steel - 500 lbs
Ordering from etrailer.com was easy, package was delivered early, and assembly took about 15 min. The only negative I have is there was some damage to the top rail ( deep scratches) don't think they came from delivery, the box that the carrier arrived in had no visible damage. Overall I am pleased with the product. I plan on using the carrier on my Pathfinder (hunting vehicle).
# 2
24x60 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs
Easy to assemble, nice and solid cargo tray! Bought it with the hitch bracket. Note: no hitch pin included.
I ordered it for my husband. My husband loves it!!! It fits with our nissan pathfinder. Very useful and heavy duty. Thank you so much..
# 3
20x59 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs
We used this for a trip to Disney. It held luggage for five people with no problem. Would recommend.
The product is good as described. I highly recommend it.
# 4
GearSpace 34 Enclosed Cargo Carrier for 2" Hitch - Slide Out - 34 cu ft - 300 lbs - Dark Gray
We looked all over for a hardshell storage pod, one that would fit 300 pounds of embroidery hardware. This one from Gearspace fit the bill. Super easy checkout with etrailer.com, and they were the only ones to offer free shipping, and since this is a larger, heavier item, that means LTL Freight. Not [online vendor] and not the Mfg. The GearSpace 34 arrived earlier than promised, and it was an easy unload if you have room for a sixty foot tractor trailer. 190 lbs on a pallet, but it will load right into the back of a pickup real easy. Took about 30 minutes to install, and it went like a breeze. Light test, check... signals, check. Ready to roll on our next RV trip, with lots more room for goodies along the way. This item gets an A+, it works as advertised, and etrailer.com was GREAT. They communicate often and update on order status. even sent out an email to get customer feedback and review, along with some pictures. I'm sure after this stellar review they will send me a nice etrailer hat & Koozie Pictures show the Gearspace 34 loaded with about 200 lbs right now. It never moved an inch and is solid on the mounting hitch hardware. You will not be disappointed with this product, it's top of the line for RV rear storage.
The gear space was delivered assembled; it took m15 minutes to attach mount into receiver and secure. My wife and I were able to lift onto mount with no problems. Looks great on the back of our Renegafe Vienna. An excellent solution to additional storage for full time Rv.
# 5
19x60 Curt Cargo Carrier for 2" Hitches - Aluminum - Folding - 500 lbs
We used this for a trip to Disney. It held luggage for five people with no problem. Would recommend.
# 6
20 x 59 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs
Easy to assemble, nice and solid cargo tray! Bought it with the hitch bracket. Note: no hitch pin included.
This turned out to be a great product, very solid once put together. And that is the key issue, putting it together. The directions are almost useless. I would like to greatly thanks the folks who wrote reviews and gave info on putting this product together. The three top tidbits of information were: 1) The "lip" MUST be down for the "Connection profiles" to fit (try putting the two connection parts (one has the reflector on it) onto the bottom frame and you will see how it fits together; 2) You better have 13, 14, &17 mm wrenches and also sockets (to speed things up). All the nuts and bolts except for the hitch pin are metric; and 3) Do not tighten down any of the bolts until you fully assemble the carrier. If you do, you will not be able to get the pieces to fit. Thanks so much to the reviewers who took the time to give such great advice. It is time consuming to put this carrier together, but not difficult if you follow above. It looks good once assembled and should work just fine, haven't put it on my trailer yet.
# 7
17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs
This turned out to be a great product, very solid once put together. And that is the key issue, putting it together. The directions are almost useless. I would like to greatly thanks the folks who wrote reviews and gave info on putting this product together. The three top tidbits of information were: 1) The "lip" MUST be down for the "Connection profiles" to fit (try putting the two connection parts (one has the reflector on it) onto the bottom frame and you will see how it fits together; 2) You better have 13, 14, &17 mm wrenches and also sockets (to speed things up). All the nuts and bolts except for the hitch pin are metric; and 3) Do not tighten down any of the bolts until you fully assemble the carrier. If you do, you will not be able to get the pieces to fit. Thanks so much to the reviewers who took the time to give such great advice. It is time consuming to put this carrier together, but not difficult if you follow above. It looks good once assembled and should work just fine, haven't put it on my trailer yet.
Easy to assemble, nice and solid cargo tray! Bought it with the hitch bracket. Note: no hitch pin included.
# 8
24x60 etrailer Cargo Carrier for 2" Hitches - Steel - Tilting - Folding - 500 lbs
We used it for the first time this weekend. Two 300 mile trips and no problems. No rattles. Very quiet.
Super disappointed in this etrailer purchase. The product came in a large box that was fully intact and not damaged. The actual cargo basket was meticulously wrapped and appeared to be brand new as expected. The other components however, like the arm, were in boxes that were smashed, old, worn, and had multiple layers of old tape. The arm itself was scratched and banged up, even rusty in spots. Clearly it was used or had been a returned item. If I wanted a dented, gouged,and rusty Cargo Carrier I would have purchased one used, for half the price. This is not the quality I expect from etrailer.. I have purchased many racks and other items from this company and usually the quality is outstanding. This time they dropped the ball. I have since read other reviews and it is apparent that this is not an isolated incident. I'd have sent it back if it wasn't so damn heavy and awkward to lug around.
# 9
Ultra-Fab Dirt Bike Carrier for 2" Hitches - With Ramp - 77" Long - 500 lbs
I can't say I'm entirely happy with my purchase. The instructions were more confusing than helpful. Note in "instruction.jpg" photo of STEP 1 that the text says to put the 8 small bolts in from the inside first, but the drawing clearly shows them as going in from the outside. The last step says to place the ramp onto the receiver as shown.... glad I didn't throw away the box because there is no drawing that shows ramp installation. Actually, the photo on the box was more helpful than any of the instructions. Also, I need to make a trip to the hardware store to buy longer medium bolts because the ones that came with the carrier were not long enough to fully engage the self locking feature of the nylon lock nuts. At a minimum a couple of threads should protrude beyond the nylon. See photo "nut.jpg". The bolt threads don't reach the end of the nylon, so the self locking feature is not fully engaged. I did tighten the nut, but that was as far as it would go. I think once I get back from the hardware store with the new medium bolts and after I reverse the 8 small bolts (I followed the drawing and not the text of the instructions), I'll be OK with the carrier.
"Instantly Get Rid of Wobble and Upgrade With Lights" This is not a 5 because ramp should be longer & there should be some type stabilizer to temporary hold bike while strapping down, I'd pay more for those upgrades. The wobble can instantly be solved by hooking Tie-Straps closest to vehicle directly to the receiver where you hook your chains, rather than hooking them to the provided holes on carrier itself. You of course use the provided strap holes ones on the opposite side. When strapped down as stated, the carrier now becomes one with the vehicle & @ 80mph there is no wobble. (*TIP: Put ramp back in its place before strapping down or else it won't fit with the strap hooks in the way.) I upgraded mine with lights for both safety reasons & not needing the Police any reason to pull me over. It was very simple and cost me nothing but time & maybe $50. I recommend this product whole heartedly.
# 10
32x48 Reese Solo Cargo Carrier for 2" Hitches - Steel - 400 lbs
I received the package in a pretty rough exterior condition but everything was fine inside. The previous comments about having to cut away the expanded metal flooring in order to install the carriage bolts wasn't true in my case. Apparently, this quality control issue has been addressed by the manufacturer. Assembly went well and wasn't complicated. A different carriage bolt with a longer square shoulder should be used. The shoulder doesn't grip too well to the square cutout in the frame and even while pressing firmly on the head of the bolt, it wanted to turn as I was tightening the nut. All in all, it seems to be a solid product and I look forward to using it.
I wish the load capacity was a bit higher, but overall I am satisfied with the cargo carrier. It is perfect for lugging my two dog crates behind my vehicle instead of inside the vehicle. Thank you for offering a dimensionally larger cargo carrier than most retailers.
MaxxTow Hitch Cargo Carrier Review - 2016 Nissan Pathfinder
Today on our 2016 Nissan Pathfinder, we're doing a test fit of the MaxxTow 48x21 Cargo Carrier. That part number is MT70422. Now this has a five hundred pound weight capacity and works with two inch hitches only. While it's on our vehicle we're going to start off by taking a few measurements here. We're going to have our ground clearance first, it's going to be about eleven and three quarter inches. Overall to our vehicle, we're adding about twenty eight and three quarter inches, and our closest point is going to sit about seven inches away.
Carpod Hitch Cargo Carrier Review - 2016 Nissan Pathfinder
Today on our 2016 Nissan Pathfinder, we're doing a test fit of the Carpod Walled Cargo Carrier. The dimensions are 23 by 47, it has a 450 pound weight capacity. It's designed to work with 2 inch hitches only. The first thing we're going to do here is take a few measurements. We're going to do ground clearance first. It's going to be about 17 1/2 inches because we do have that raised shank in the back.
Stromberg Carlson Hitch Cargo Carrier Review - 2016 Nissan Pathfinder
Today on our 2016 Nissan Pathfinder, we're doing a test fit of the Stromberg-Carlson 23x60 cargo carrier. That part number is CC-100. This has a weight capacity of 500 pounds and works with 2" hitches only. The first thing we're going to do while it's attached to our vehicle is take a few measurements. Ground clearance is going to be first. We're going to have about 10-1/2" there. Overall to our vehicle we're going to have about 28-3/4" and our closest point looks to be about 5" away there.
Curt Hitch Cargo Carrier Review - 2016 Nissan Pathfinder
Today on our 2016 Nissan Pathfinder, we're going to test of the Curt 20 X 60 folding cargo carrier. That part number is C18151. We already have this in our hitch. Keep in mind that this has a weight capacity of 500 lbs. and works with 2 inch hitches only. First thing we're going to do here is take a few measurements. We're going to have our ground clearance first of about 12 inches.
Curt Hitch Cargo Carrier Review - 2016 Nissan Pathfinder C18150
Today on our 2016 Nissan Pathfinder, we're doing a test fit of the Curt 20 by 60 cargo carrier. That part number is C18150. This has a weight capacity of 500 pounds and works with 2 inch hitches only. The first thing we're going to do here is take a few measurements. Ground clearance is going to be first. We're going to have about 14 and 1/2 inches there.
Curt Hitch Cargo Carrier Review - 2016 Nissan Pathfinder C18110
Today, on our 2016 Nissan Pathfinder, we're doing a test fit of the Curt 20 x 48 Cargo Carrier. That part number is C18110. This has a 300 pound weight capacity and works with both 1 1/4 and 2 inch hitches. The first thing we're going to do here is take a few measurements. We're going to start off with our ground clearance. To the bottom of this bolt here we're going to have about 15 inches. That is because we do have a raised shank in the back, which is going to lift our carrier even higher than our hitch.
What our customers are saying:
"The trailer hitch mounted cargo carrier is an outstanding accessory. It allowed us to bring so much more on vacation. The side rails made securing things really easy and the auxiliary taillight kit plugged right into my plug. The service was so great that I just ordered a trailer hitch cover for the winter. Thanks!"