Most Popular Triple Axle for 2016 GMC Sierra 3500

etrailer support staff gets 5 stars. However... The kit I received was incomplete. Bushings were missing, two shackle links and a shackle link assembly were missing. Additionally, one of the shackle link assemblies would not accept its' mating link - the bolt shafts were spread apart. one of the equalizer assemblies did not have that gold anodize coating, another had incomplete anodize coating. see pic. etrailer staff shipped me the bushings and the shackle link assemblies to complete my project. As for the finish, POR 15 gloss black is a lovely color. The issue here is with Dexter, not etrailer

Click to Enlarge

Click to Enlarge

Missing parts - Missing two shackle links and eight backing plates… please overnight missing parts as I am stranded and unable to leave…

Click to Enlarge

Click to Enlarge

Worked great, paint is holding up, hardware was good quality, bolted right in…no issues, hold load at least as good as factory springs. Would recommend and buy again!!

Not only were the parts the right parts the kit had all I needed to do it right the videos made it as easy as it could be. The right parts that work and good videos on how to do it. I did call to be sure I was ordering everything I was going to need and was given great advise and was not encouraged to get things that I did not need. They are my go to team to get anything trailer done.

part came just as described and exactly what i needed. thank you

It is an excellent product, still going strong.

Trash !!!! 4 equalizers and just one it’s holding the weld now I’m losing money because my trailer suspension its not functioning

Click to Enlarge

These fit perfectly on my triple axle Kaufman trailer where I replaced all 4 of them. I got some commercial quality spray paint and painted them black. I'll also include some pictures of my old ones that were original with the trailer. You can see they definitely needed to be replaced! I always use etrailer for my trailer parts. Everything is good quality, fits perfectly, and arrives on time.

Click to Enlarge

We installed the kit on a home-built 25' gooseneck trailer that we were converting from 2 axles to 3. This kit, along with new leaf springs on all 3 axles, went on with no issues, and it has been running strong with no problems since the installation. We've put quite a bit of weight on the trailer between logs, lumber, tractors, and equipment, and there have been no issues so far. It was great to have everything we needed, (other than springs), in one kit! And etrailer has always been good about fast delivery, easy purchasing, and great updates on status. Things have gone so smoothly that we have never had to contact Customer Service, so I can't comment on how they do!

Click to Enlarge

I ordered this kit for a trailer that I bought as scrap iron to haul logs so I wouldn't tear up my good trailer. The first load I broke 3 shackles and 2 equalizers. I looked at parts and found this kit at a great price to rebuild my suspension. I had it within 3 days of the time I ordered, And the service was great!! The best part....... when I got the box I thought they knew me personally and had already seen the trailer I was working on, Redneck Trailer Parts LOL. I plan on getting rid of the redneck dually setup with a different set of axles and get rid of the trailer house wheels and make it into a gooseneck. I will for sure get all my parts from Etrailer.com for the rest of this project and any other trailer parts I need. VERY VERY pleased with the parts, service and fast shipping!!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

The reason for the average rating is the shipping of the parts. E-trailer needs to change how these heavy parts are shipped. A cardboard box doesn't work. You can not depend on UPS or FEDEX to handle shipments with care. They think "Fragile" is a french word for throw and if the box is heavy it will get abused for sure. E-trailer was helpful with getting my parts that were missing from the busted up boxes but it was slow moving. Now as for the parts, ( Not E-trailers fault)The ones that were laser cut needed work so we could get the shoulder bolts through the holes. One of the brackets was welded crooked.I am fortunate since I have a laser and deal with this everyday. I also drew and cut my own gauge plate so I could mount both gauges to one plate. I appreciate all that were involved just hope you make changes to how these parts are shipped. I would recommend wooden crates and LTL shipping. Tested the bags overnight and no leaks. Cant wait to see how my fifth wheelpulls and I hope I dont have screws and trim falling off my walls any longer!!! Ha HA

Click to Enlarge

Click to Enlarge

Click to Enlarge

These hangers are great for the center. They provide just enough clearance for your equalizer. Because of the length and being that I am a welder I added a support inside the hanger to keep them rigid!

great product and your staff was very knowledgeable and helpful I have told many friends about it and I will use your company again when needed

Very good quality and quick delivery

Very happy with the product, still performing as expected, Thanks you Allison K for all your help .

Fit was great and replacement went smoothly.

The equalizers fit great, and the pin holes are the correct size to accept bronze bushings! I have found that some other places sell equalizers with oversize holes that will not hold bronze bushings. I appreciate you selling good parts that are made properly !

Perfect fit, welded to frame of fifth wheel trailer without any issues and has made the trip to Tucson and back home about 3500 miles without breaking. So far so good

Click to Enlarge

Click to Enlarge

Product was received expeditiously. Product is as advertised. Thank you.

Click to Enlarge

One of the equalizers (SRE4000) failed after less than 500 miles. Had to go through MorRyde and they sent me replacements and stated that the SRE4000 has been replaced by AllTrek4000 (which is the replacements they sent. They are also cheaper than what I bought but they would not refund the difference or the labor I had to pay to the the SRE4000’s installed. I ended up installing the AllTrek 4000’s in the campground while I was on vacation due to the failure.

I feel so much more confident the suspension will hold up to many miles of travel. I love that I can grease the bronze bushings and know that there is maximum protection in those joints. Of course I also love the smooth ride and less disruption inside the camper.

These equalizers should be standard on all trailers. Improved the ride tremendously and is a stouter product than the original equalizers that came on the trailer.

After taking off my Equa flex and seeing the cracked welds and the complete junk that they produce, the MORryde 3000 is built extremely well 100% better. The wett bolt kit is definitely a must have! I’m so glad I noticed the cracked welds around the bolts and housing when my trailer was parked at home versus on the road. Calling etrailer for tech-support and making sure I had all the measurements right was super easy and their customer service is superior. I highly recommend etrailer!

Click to Enlarge