Most Popular 20000 lbs GTW for 2016 Chevrolet Silverado 3500

Purchased this per recommendation from Jared. This thing was a direct bolt in for my truck as he said it would be. Took me less than an hour to assemble and install. This hitch is incredibly heavy duty for my purposes of towing my new 5th wheel trailer. This thing is going to be instrumental over the next few years for me. Even took a picture with it looking good in my truck!

Click to Enlarge

I installed this directly after installing the underbed turnoverball gooseneck hitch, and it was an easy install. Very well written instructions. Equipment looks robust, top notch welds, nice thick powder coat.

Click to Enlarge

I installed this directly after installing the underbed turnoverball gooseneck hitch, and it was an easy install. Very well written instructions. Equipment looks robust, top notch welds, nice thick powder coat.

Click to Enlarge

Purchased this per recommendation from Jared. This thing was a direct bolt in for my truck as he said it would be. Took me less than an hour to assemble and install. This hitch is incredibly heavy duty for my purposes of towing my new 5th wheel trailer. This thing is going to be instrumental over the next few years for me. Even took a picture with it looking good in my truck!

Click to Enlarge

I installed this directly after installing the underbed turnoverball gooseneck hitch, and it was an easy install. Very well written instructions. Equipment looks robust, top notch welds, nice thick powder coat.

Click to Enlarge

Products are of high quality! Prices are better than their competitors! Shipping is fast! Customer service is OUTSTANDING! No reason to shop anywhere else!!!

I'm thankful that the truck driver delivering my hitch agreed to let me back my PU up to his lift gate and sat it down in the back of my truck. That sucker is heavy! Took about 45 minutes to install. Very well built!

Click to Enlarge

Click to Enlarge

quality is apparent easy to use

I installed this directly after installing the underbed turnoverball gooseneck hitch, and it was an easy install. Very well written instructions. Equipment looks robust, top notch welds, nice thick powder coat.

Click to Enlarge

Purchased this per recommendation from Jared. This thing was a direct bolt in for my truck as he said it would be. Took me less than an hour to assemble and install. This hitch is incredibly heavy duty for my purposes of towing my new 5th wheel trailer. This thing is going to be instrumental over the next few years for me. Even took a picture with it looking good in my truck!

Click to Enlarge

Excellent service, I ordered my hitch Wednesday around noon, Monday at 3:30 it arrived at my door in good order and was put together and put in my truck very Quickly! I bought a Chevy 3500 with the new puck system for hitches and that is the reason I ordered the new Curt 20A 5th wheel hitch and it works great ! I have bought from etrailer several times and will order from them again if and when I need trailer products !

Just want to give some kudos to the folks at etrailer. Descriptions and videos are on the money. Awesome shipping along with tracking , received my curt Q20 on time and installed per manufacturers instructions. The one issue I had with installation was torquing the 4 bolts. The 2 in front went easy, but the ones in back the torq wrench did not fit so had to take the hitch head off and pull hitch out of truck and turn over to torq the bolts. Little pain but not to bad. Etrailer keep up the good work. Scott

I ordered my Curt hitch/adapter rails from etrailer and received a great price and prompt delivery. Everything arrived in good shape and has worked to perfection. Thank you etrailer.

I recently purchased a Reese M5 20K hitch for my new Silverado 3500HD, Crew Cab, 8’ bed. As usual, Etrailer pricing was very good and with free shipping to boot. The hitch arrived via UPS in just a few days after placing the order. Following the detailed instructions provided by Reese, the install into the factory “puck” system, was fairly straight forward. However, a word of caution concerning the install. There are 4 15/16” bolts that need to be torqued to 220-foot pounds and are somewhat difficult to get to. Fortunately, I was able to borrow a torque wrench that would accommodate the recommended foot pounds of torque. Also, you may have an issue if you need to place the hitch at its highest position. The release handle might protrude above the bed rails of your truck in this position. This will be a problem if you have a bed cover. Reese is/was well aware of this issue and sells an after-market handle that will correct this issue. Etrailer lists this handle on their Web page.

Click to Enlarge

Wow what a great job you guys did! I received the new hitch on time an with all parts required to put it together. Thanks

Click to Enlarge

Excellent service, I ordered my hitch Wednesday around noon, Monday at 3:30 it arrived at my door in good order and was put together and put in my truck very Quickly! I bought a Chevy 3500 with the new puck system for hitches and that is the reason I ordered the new Curt 20A 5th wheel hitch and it works great ! I have bought from etrailer several times and will order from them again if and when I need trailer products !

Have not towed anything yet but I was concerned that i may have to adjust my bed mounted brackets to accept the new hitch but that was not the case. The lugs dropped right in perfectly.

Very pleased with the Andersen hitch. Easy to install or remove, light weight and strong. So much more simple and faster to setup than my previous hitch. I can have full use of my truck bed in just a couple of minutes. I also feel the front jacks on the trailer will last longer since I am not stressing them by forcing the kingpin into the hitch as I had to do with my old hitch. The only negative I can find is the ball funnel. When raising the trailer off the ball it is important to chock the truck and trailer. If not chocked the truck can roll foward and break the lip off the ball funnel. Otherwise, in my opinion, this is the best 5th wheel hitch out there.

I installed this directly after installing the underbed turnoverball gooseneck hitch, and it was an easy install. Very well written instructions. Equipment looks robust, top notch welds, nice thick powder coat.

Click to Enlarge

Purchased this per recommendation from Jared. This thing was a direct bolt in for my truck as he said it would be. Took me less than an hour to assemble and install. This hitch is incredibly heavy duty for my purposes of towing my new 5th wheel trailer. This thing is going to be instrumental over the next few years for me. Even took a picture with it looking good in my truck!

Click to Enlarge

Excellent service, I ordered my hitch Wednesday around noon, Monday at 3:30 it arrived at my door in good order and was put together and put in my truck very Quickly! I bought a Chevy 3500 with the new puck system for hitches and that is the reason I ordered the new Curt 20A 5th wheel hitch and it works great ! I have bought from etrailer several times and will order from them again if and when I need trailer products !

Excellent service, I ordered my hitch Wednesday around noon, Monday at 3:30 it arrived at my door in good order and was put together and put in my truck very Quickly! I bought a Chevy 3500 with the new puck system for hitches and that is the reason I ordered the new Curt 20A 5th wheel hitch and it works great ! I have bought from etrailer several times and will order from them again if and when I need trailer products !

Very good design, fairly easy straight forward install on my new 2022 Chevy 3500 Drw with puck system in floor of body

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I recently purchased a Reese M5 20K hitch for my new Silverado 3500HD, Crew Cab, 8’ bed. As usual, Etrailer pricing was very good and with free shipping to boot. The hitch arrived via UPS in just a few days after placing the order. Following the detailed instructions provided by Reese, the install into the factory “puck” system, was fairly straight forward. However, a word of caution concerning the install. There are 4 15/16” bolts that need to be torqued to 220-foot pounds and are somewhat difficult to get to. Fortunately, I was able to borrow a torque wrench that would accommodate the recommended foot pounds of torque. Also, you may have an issue if you need to place the hitch at its highest position. The release handle might protrude above the bed rails of your truck in this position. This will be a problem if you have a bed cover. Reese is/was well aware of this issue and sells an after-market handle that will correct this issue. Etrailer lists this handle on their Web page.

Click to Enlarge