# 1
Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
I purchased this to accept a previously purchased bike rack.
This has worked great to reduce my 2" hitch so that I can continue to use my 1 1/4" Thule bike rack, and I like that it doesn't extend out much from the hitch. After my last trip though, the inset separated from the larger piece. I can still use it, but without the smaller piece fixed in place, I can't put it on the car first and then slide the bike rack into it since the smaller piece slides, and it's impossible to line the holes up. It's also rusted more than I expected. It wasn't inexpensive, and I was hoping it would last longer. I've used it for maybe a dozen trips.
# 2
MaxxTow Trailer Hitch Receiver Adapter - 2" to 1-1/4" Hitch - 11" Long
Made well. Fits a little tight when I install my existing 11/4 Thule bike rack . The only issue is that the bolt that secures the bike rack to the adapter is a little short so I will have to look for a longer bolt.
# 3
Hitch Adapter 2" to 1-1/4" Trailer Hitch Receiver - 7" Long
Fantastic Product. Saved me from having to buy a brand new bike holder for my new car with a different hitch size.
Professional, delivered a day early. As promised. What more can you want.
# 4
Curt Trailer Hitch Receiver Adapter - 2" (Class III) to 1-1/4" - 4" Long
Hitch adapter is exactly what I ordered. However this review is not really about the adapter itself. It is about Etrailer.com's customer service. The adapter was shipped in the box along with a new hitch that I had ordered. The shipper somehow destroyed the box and only the hitch arrived. The adapter was lost. When I reported the missing adapter, Etrailer.com immediately shipped out a new adapter, which I received a couple of days later. Problems do happen, what makes the difference is how a company responds and takes care of the problem. Etrailer.com response and handling of the problem far exceeded my expectations and will be one of the reasons I will consider them first for any of my needs that they can supply. Bravo Zulu
The fact that it's steel is a plus, and it extends the hitch so that the bike rack that's attached now is far enough away from the hatch to not bang against it. Great product!
# 5
Titan Hitch Box Extension for 2-1/2" Trailer Hitches, 41" - 48" Long
Just received the 41/48 inch hitch extension today so haven’t actually used it. However, one can tell the high quality by looking at the welds and thick paint coating. This item is extremely heavy. I expected some weight to it, but it surprised me. Also, the tubing has very tight tolerances. I have two ball mounts, neither of which slid into the extension on their own. I had to pound them in and tap them out with a 3 pound hammer. Once paint and labels were scraped away by this action the ball mounts were able to be slid in by hand. This extension will be used on my dually carrying my truck camper. I’ll be towing an aluminum trailer with a Can Am Spyder. Total weight towed will be less than 2000 pounds so I don’t expect the extension to be subjected to any stress.
As per my last 3 orders here are some pictures of how I received the item along with what was broke or bent. I can fix it but I shouldn’t have to. So I will try elsewhere from now on cant deal with your shipping dept , anymore.
# 6
Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long
I had to remove burrs from the inside of the tube, both at the holes drilled (for hitch pin) and the end where the ball hitch goes in. The welded boss on the end of the tube had burs left over from the cutoff operation. The ball hitch would only slide in a couple of inches prior to deburring it. Also the packaging was not very good, see pictures. No damage to the product but I am surprised it even stayed in the box during the trip here, it was completely loose in the box and tore it apart during transport.
The product is good the packaging for shipping needs improvement. The box came ripped in half and only the tape on the bottom of the box was holding the box together. The plastic cap for the one end was broken and unusable. The other end had a dent in the metal that had to be filled down to be able to insert it into the receiver. The bracket for the plug extension to mount into the hitch extension was bent together so it had to be bent back straight. This was to be able to insert the plug and line up the 4 holes to be able to mount the receiver plug to the extension.
# 7
Trailer Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver
Wanted this adapter so I could use my 1 1/4" bike rack on my 2" hitch. Sized is reduced by welded steel plates inside the reducer. Poor tolerances. Was more like 1 3/8" inside width, so my 1 1/4" bike rack mount flops over to one side or the other.
Another great product from etrailer. This item along with my recent hitch purchase is the "one two" punch for quality products and service. Etrailer is absolutely the best. Would highly recommend their products and great service to everyone that is looking for quality at an incredible price.
# 8
Curt Hitch Extension and Reducer for 2-1/2" Trailer Hitches - 24" to 34" Long
Who do I contact about getting the right extension bar? The one I ordered Is a 2 1/2 inch which I need a 2 inch to slide into my receiver or if you guys have a 10 to 12 inch, 2 inch extension so I can connect it I sent a photo of the end that is 2 1/2 which I need it to be 2 inches to slide into my receiver
Received the product on time and as described however two days later I found it on Amazon for $167 vs the $XXX I paid from etrailer. When I called to see about a price adjustment - they couldn’t assist and offered return and re-purchase from Amazon - minus a $XX return shipping. Lesson learned.
What our customers are saying:
"very easy to shop"