# 1
Yakima FatCat EVO 4 Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
I actually ended up buying a second set so I can fit a total of 8 pairs of skis on my jeep. I love the quality and ease of installation. It’s an easy to use system and love that my skis are secured.
These are extremely easy and quick to install. Love the aerodynamics of them as well as it's quality craftsmanship. Very pleased with this item and with the delivery speed! From North Shore Oahu....MAHALO
# 2
Rhino-Rack Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
Howzit etrailer.com & staff. the rack itself is sturdy and more aero than comparable units. For my 2017 Subaru Crosstrek (OEM) Aero Bars, it was necessary to shim the (rear) lower/leading edge clamp assembly with two 1/8” x 1.5” x 1.5” (EPDM) rubber pads. The bars are shaped like a wing – and these shims helped to level the rear rack with the one in front. Overall - it looks very clean and functional. I might screw on some rubber ends over the ends of the mounting bolt to complete the project. Time to make some turns. Thank you!!
The Rhino Rack was easy to put up on a 2018 Subaru Outback. Took me about 10 minutes. The only issue is that the rack bottom bracket piece is is convex with an acute angle which makes it not fit perfectly on the Subaru crossbar that has a flat bottom. Loaded 2 pairs of skis and poles and the rack kept them securely fastened during transport on the highway. There was some noise from the rack during highway driving but it was minimal.
# 3
Rhino-Rack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards
E trailer I have a 2019 Mazda6 and purchased the rhino rack series 2500 parts (fit kit #DK289, foot pack #RRRLKVA, aero crossbars#RRVA126B-2), and the rhino rack snowboard/ski carrier #RR576. My car does have fixed mounting points underneath the strip on the roof so I opted to add them to my roof and not use the clamp for kit that goes in the door jam. Every time I entered the year, make, and model of my car, the parts came up with the clamp fit kit part #DK387 which I did not want. But after some research, I found the correct fixed mounting point fit kit. The site of course told me that this part wouldn’t fit my car but after looking at the customer reviews, I saw them used on Mazdas. All of the rhino rack instructions were not the best. We did have to make some adjustments. One of the instruction packs tells you how long you’re supposed to cut the rubber pieces that go into the crossbars based on your car but unfortunately, the measurements were wrong for my car (picture- front 166mm is wrong). The front bar length was about an inch too short and I had to add more rubber to make it longer to fit the fixed mounting points on my roof. After some time of trying to interpret the instructions, and looking up whatever available instructional videos were online, we finally finished installing them and they do look really nice. At higher speeds on the highway I can definitely hear more noise. The actual snowboard carrier is fine, fits all 4 boards fine. It is a little difficult to close once I have my boards in there because you have to push the top bar all the way down and hold it down to be able to turn the key to lock it. I’m just happy I don’t have to shove the boards in my trunk. I do like that all the parts in this series come with locks and keys. So far no problems. Overall good product.
This rack works great with the four pairs of skis I lugged from Oregon to Alaska. I'm using it on the beef rack cross bars that came with my go fast camper which are very difficult to find mountings for. This one worked great though with a little bit of metal grinding on the bolts that slide into the t-slot of the rack. It locks and unlocks fairly easily (with a little bit of jangling involved), but so far so good!
# 4
Thule SnowPack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards - Silver
So easy to install onto Thule AeroBlade. Quality materials and convenient design. No significant noise noticeable from wind resistance when driving. etrailer provided great shipment/notification support and was great resource for how-to videos, commentary.
Better than I expected. Only comes with four core locks so be aware of that if you want six like I did. Bought two more locks from Thule with the same key #. Mounted this carrier on my Rhino Rack. Perfect fit and looks great. Would highly recommend.
# 5
SeaSucker Ski and Snowboard Carrier - Vacuum Cup Mounted - 4 Pairs of Skis or 2 Boards
Quite an amazing product. When it arrives, you think, "Oh man, how is this going to make it the whole trip?" But I can tell you that I traveled from Fort Worth to A-basin/Keystone and back with no issues. That's 1640 miles there and back at speeds up to 85 mph and at least 3 of the world's climate zones on just this one trip. It is best practice to give each of the suction plungers a few taps every time you gas up, but I forgot a few times and it still caused no issues. Simple assembly with 4 suction cups and 2 of the high-density plastic racks that connect to each other with an included alan key and headless screw. Also includes the high tension straps you'll need to fasten skis/boards at the front and rear of your gear. When I say this rack was solid, I mean like I'd touch it to test for stability while driving and gassing up and it felt like it was sitting in hardened cement. Absolutely rock solid. And, there's a spare strap and plunger included. A couple minor things worth noting (but none of these could justify taking away from the 5-star rating I gave this product): - The suction cups require a clean surface, so don't take this lightly. I took mine to a car wash right before mounting. - The clean surface must also be smooth and seamless. I didn't notice until I started mounting that my truck has a grooved roof, so I had to put 1 rack on the bed cap roof. It worked great. - I wish there was an option just for skis b/c these racks were about 1" too tall to fit in the garage while mounted to the roof, and it's obvious the height of this product is to also accommodate snowboarders. Like I said, minor stuff. 5-stars all the way. You won't regret it!
Only used them once for a 4 hour drive to the slopes. Transported two snowboards at highway speeds for a majority of the travel. Mounts stayed planted and were still very secure at arrival. Nice to be able to remove to when at destination while traveling around locally.
# 6
Inno Ski and Snowboard Roof Rack - Dual Angle - Locking - 6 Pairs of Skis or 4 Boards
# 7
Rhino-Rack Ski and Fishing Rod Carrier - Locking - 2 Pairs of Skis or 4 Fishing Rods
Last year I purchased Rino ski racks from etrailer and they work great . The hardware fit my roof racks and all the fittings are tight. Ordering was easy. Shipping was fast and I even got a follow up personal email from George a year later asking how I liked them - which was impressive! I would definitely recommend etrailer as an honest and good outdoor gear company!
Great product! I think it's a bit expensive but well worth it. I bought it to transport my fishing poles. So no long rods in my new SUV.
# 8
Inno Gravity Ski and Snowboard Carrier - Clamp On - Locking - 6 Pairs of Fat Skis or 4 Boards
Easy to install. Works fine with my 2017 CR-V factory crossbars even though they are only 20mm thick. Quick removal when not needed.
Thule Traverse Roof Rack Installation - 2013 Toyota Prius
Today on our 2013 Toyota Prius, we'll be test fitting the Thule square bar roof rack system, using part numbers THLB50 for the Thule square load bars, part number TH480 for the Thule Traverse roof rack foot pack, and part number THKIT1566 for the Thule roof rack fit kit for the Traverse foot packs. With our roof rack assembled according to the instructions, we'll begin our test fit by opening both doors at the front of our vehicle. We'll grab our front bar and place it onto the front part of our roof. To make sure we have it in the correct location, we need to measure 12-1/4" from the leading edge of the windshield to the closest point on our foot pack. We'll do this for both sides to make sure that our feet are in line with each other. Now we can take the included tool, open up the foot packs, and tighten the Allen bolt with our Allen key.
What our customers are saying:
"Excellent service and communication. Expect part to be excellent too!"